set_mac was removed in net_set_mac is in init_test(). Rebase was
not done successfully.
Change-Id: I0d1a2f37cdb441064ae97a0e34ae41e9c7e77984
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Set the MAC address so that the stack can generate a link
local address and mark internal variables as static to avoid
namespace pollution.
Change-Id: Ic8447054629fcdd5f7e1f8b8c5e2bb477bd63809
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo server is listening on port 4242 and when it receives
UDP packet, it will reverse the data and send it back to the
caller. This can be used to verify that the IP stack is doing
something useful.
Change-Id: Ibbc48c21f2513d59480c5a3bb34c775eb3df8170
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds gatt-exchange-mtu which works as follow:
btshell> gatt-exchange-mtu <bdaddr> <bdaddr_type>
bt: bt_gatt_exchange_mtu (0x0010c138): Client MTU 65
Exchange pending
btshell> bt: bt_att_recv (0x0010e310): Received ATT code 0x03 len 3
bt: att_mtu_rsp (0x0010e310): Server MTU 517
Exchange successful
Change-Id: I7280fb9d9fafc0f4bd1ef0f2226c255a5acf2592
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to use shell since one can copy full address
from console output. Both variants with and without braces are
accepted.
btshell> connect 7C:2F:80:94:97:39 (public)
Connection pending
btshell> Connected: 7C:2F:80:94:97:39 (public)
btshell> disconnect 7C:2F:80:94:97:39 public
btshell> Disconnected: 7C:2F:80:94:97:39 (public)
Change-Id: Ic10386ee054ade1900e5f010857c0f85e5cb364a
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous comment style used RETRURNS:, use @return to comply
with javadoc style.
Change-Id: Ib1dffd92da1d97d60063ec5309b08049828f6661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some comments have \param, convert them to javadoc style.
Change-Id: I6abcdab91f4f616632392292600f4b0081b2a842
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enables make outgoing connection with error handling.
Free connection objects maintained in polls are assigned to active
connection by result of lookup on the polls based on input
peer LE address.
Updates shell application to reflect above changes in stack.
Change-Id: Ibc71343c0d122cc78c48bac2ff1e50533369b7d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Notifications will be sent on connected/disconnected events.
Change-Id: Iaac6851a987a630ce41c5836de49dccc6ee5d385
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for enabling advertising on DUT. For now
setting custom advertising data or scan response is not supported.
Change-Id: I506d944565e524eb2103949df6cf003347d4c117
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Also rename bt_conn_security function to bt_security and
bt_conn_security_t to bt__security_t.
Change-Id: I543c7b97241c4389ef0eb491b6869f93105ae533
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This allows to elevate security of a connection.
Change-Id: I492a92026c8db6feccffb96334be4557a5c73b48
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This way the stack will generate a proper IPv6 link local
address.
Change-Id: I149d82cf5623f3073b9edc64fe4e426460eb793b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The mac address length needs to be 6 bytes because this
test app has no 802.15.4 support. The uIP stack checks
this and expects only 6 bytes mac address in this case.
Change-Id: I1edd340491b4690b5a2cf285c63f90950bbc3ff3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Stress test the IP stack by always sending max number of bytes.
Change-Id: I830a92cca4efbc2aa00dd1bec75972884359621c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test_15_4 test application now works with microkernel also.
Change-Id: I041a917be599936089af9ffaba9c27b9aeb5a481
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enable 802.15.4 driver that receives the IPv6 packet, does header
compression on it and writes it to the 15.4 stack Tx FIFO.
The 15.4 Tx fiber will pick up the header compressed IPv6
6LoWPAN packet and fragment it into suitable chunks ready
to be sent to the 15.4 hw driver. The 15.4 stack Rx fiber picks
15.4 frames from 15.4 Rx FIFO (which are fed by 15.4 driver)
and reassembles the all fragmented packets and uncompress the
header and writes to the IP Rx FIFO.
The 15.4 loopback radio driver receives the 15.4 frames and
put it back to 15.4 Rx Fifo.
Change-Id: I68d1c7ff6de0e8770616e574206c2091c69a28e6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set the loopback IPv6 address and an all-zero MAC address as the
loopback device really does not have a defined MAC address.
Clean up the code so that the loopback driver's IPv6 addresses are
not reused in other parts by mistake.
Change-Id: I07cc8bc5ad3a2ec5997bb313dd0ecaca4d9742f7
Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that bt_conn is public using it directly is much more convenient
and in some cases save a lookup by address.
Change-Id: Ia489948634984fe4f1a430da553f8a2a740fb531
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The sample should be under microkernel and not in the
top level samples directory.
Change-Id: Ide98fa64a5a6831f83bec25b778f9d5b39bdb4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The new name better reflects that this file contains all private
nanokernel APIs that are used by various kernel subsystems.
Change-Id: I4c258d582e93753eec9e575fdb5f9f2109417a0f
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Makes name more consistent with other CPU_CORTEX_M* options.
Change-Id: I65968cb300207ba0de6231d9a67f2720be77b6ba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
CPU_CORTEX_M3_M4 replaces CPU_CORTEXM3 as the umbrella option for Cortex M3/M4
processors.
NOTE: Selecting CPU_CORTEXM4 still currently forces the selection of
CPU_CORTEXM3. Breaking that forced select will be done in a later commit.
Change-Id: I0f36b3a2adc5c6c66db4e9b6353b921199544deb
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds new commands to shell app allowing turn on/off active LE scan.
App uses scan results callback to get feedback when found any
advertisers around.
The dummy app's callback prints out info about findings.
Change-Id: Ifffe77b804230c19bbbcbc4f38e47210c835106d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables sending LE discovery results to user app.
Updates central apps to use new scan API.
Change-Id: Id319c96e15554f2eed4cf507cddd114ca74aa8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Return code from command handler is not needed and was already ignored.
Change-Id: Ief073ccfe2ccd316b6d4eec5168fb564e96786ee
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This makes code looks similar to POSIX style parameter handling.
Also code is easier to read and doesn't require tricks like
'p += strlen(p) + 1' for next parameter.
Change-Id: I013e714ba81681da38e320fb69851c7b5a75bb52
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Adds above commands to the shell app.
Connection is made based on given address and type eg:
btshell> connect 00:00:00:00:00:00 public
In callback we get local connection id which is in fact,
the number of array entry in which the pointer to the corresponding
bt_conn has been written.
To disconnect, just provide the id eg:
btshell> disconnect 0
Change-Id: I24f7ec2de7f84c53ab847ded28a1821753c2a60d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There's no clear need for this API (at least for now) and supporting
it means we really need to get all state cleanup procedures correct.
Remove it for now.
Change-Id: Ia2c7d51d410117bef12bc08f4f97a4e38ccfb77a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it clearer that this is a specialized API not intended for
general app usage (unlike most other things in bluetooth.h).
Change-Id: I0ce1d5903610a9b3a99cf0be9f0e1462b04bf45a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Always prefix UUIDS for characteristics with service name.
Change-Id: Ic435fa725e6bc8918af631632156b071121cd0e0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated."
Change-Id: I585a9f84e8239a59b0f5b29eed0dc70efa253522
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Now that we have a publicly exposed connection object it makes sense
to pass that to the connection callbacks rather than an address.
Change-Id: I8e9b17733d1789539a83c3dbc7a778336d2b71ff
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
