Tests errno is retrieved per-thread with fibers and one task.
Change-Id: I0b0890f250a80a30806dc1294944aa42f4209ace
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Base address, IRQ, interrupt priority as well as the instance name: all
are now Kconfig based. Thus Applying the change to quark_se and
quark_d2000 platforms. Sample code is updated as well.
Change-Id: I1c225c1b68d94b22ca10423b50a78a0ba09a27a5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Base address, IRQ, interrupt priority as well as the instance name: all
are now Kconfig based. Thus Applying the change to quark_se and
quark_d2000 platforms. Sample code is updated as well.
Change-Id: Idcc89e6e9f4acc337fafc7d42f8de3061a5ece04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A platform might provide multiple RTC, either internally or externally.
Applying the changes to the DesignWare driver relevantly as well as
to the sample code.
Change-Id: Ia70e791a6c45e186cbc4dc900a268fa882331af5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A platform might provide multiple watchdogs, either internally or
externally. Applying the changes to the DesignWare driver relevantly as
well as into the sample application.
Taking the opportunity to apply propre style when need (80 chars limit
for instance).
Change-Id: Iad020c697846db483a70a748cfc8fe7147ec3c04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change the configuration to enable the sleep events in
the nanokernel event logger sample.
Change-Id: Iea5bde06736b0499c8517de1549dee894a9db094
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
build application for the supported platforms to catch any
breakage.
Change-Id: I31f3ffd3a95966ba72989a646d8ecd27efb55985
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This application creates a watchdog with 4.194s timout and reloads
every time it kicks (and does not force a reboot).
Change-Id: Ib128e2f7f91d05081d1bfb8cc24258b69bd3cb6e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a configuration that does not enable SSE and FLOAT to be used
with Quark systems.
Change-Id: I140d76893292bb9b0cef7c5a06acfd39529fe9ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since all the necessary bits utilizing UART by index have moved to
use device name instead, the uart_devs[] can finally be removed.
Change-Id: Idbae6b46c0af9eef6c22c59e121e9d6a6b52426a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Renames ns16550.c to uart_ns16550.c. This is to follow
the driver naming convention.
() Renames functions ns16550_uart_*() to uart_ns16550_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
() Renames CONFIG_NS16550_* to CONFIG_UART_NS16550_*
() Disable NS16550 for ARC as no port is defined anyway.
Change-Id: I76bbe25b9bc75eb62df81e533f84f4f63a5257b7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With MVIC these can't be arbitrarily assigned and the vector must be
<irq num> + 0x20.
The correct number of vectors is now set for footprint-min on D2000.
Change-Id: Ibf59921dbc438c7465b7050dd74d0badc9a91fc3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move btshell.h out of samples into include/misc and rename to shell.h
Move btshell.c into driver/console and rename to console_handler_shell.c
as an shell implementation based on new config
CONFIG_CONSOLE_HANDLER_SHELL.
Add shell_register_app_cmd_handler for an to app to optionally call so
that it can receive cmdlines not handled by the cmds registered with
shell_init
Change-Id: I5c1585e62ff7a0ee923c6c92833cc762cf912bad
Signed-off-by: Thomas Heeley <thomas.heeley@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample creates an alarm and repeats the alarm on every
interrupt.
Change-Id: I97583e3c5af826c51536f8d244c016e2c628e88a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Software interrupts or system calls aren't really appropriate for
zephyr, but we have an ongoing need in our test code to run a
function with arguments synchronously in interrupt context.
This patch introduces irq_offload() which allows us to do this without
separate initialization or having to manage fake IRQs in the
interrupt controller.
ARM assembly code contributed by Benjamin Walsh
<benjamin.walsh@windriver.com>
ARC is not yet implemented but will be in a subsequent patch.
irq_test_common.h has been removed and all test cases updated to
use the new API.
Change-Id: I9af99ed31b62bc7eb340e32cf65e3d11354d1ec7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Replaces calls to task_cycle_get_32() with sys_cycle_get_32().
Change-Id: I3a41cd2fd185680d4c1deb2c07ffb82647211fc2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replace calls to nano_cycle_get_32() with sys_cycle_get_32().
Change-Id: I3ed2589489d4de3e79cab085122e95dabafe8915
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The sample suffix is redundant, since we are under samples.
Change-Id: Ifb59007f0c1b156c7bb306506e3b22efc9b993dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Avoid having to remove quotes wherever the platform name is used
by exporting the variable only once.
Change-Id: I4cb51901e4ac19d70d0310fe6bbacd157f586661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the following cruft from the nanokernel version of the kernel
event logger sample application:
1. MDEF file
This file is only relevant to microkernel projects.
2. References to advanced power management and tickless idle
These features are only relevant to microkernel projects
Change-Id: Ice9bbf0a3d73c45a9157bd38e0a2703f5915d51d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Original name was too generic and confusing. This patch renames
driver to pipe UART and moves it to console drivers folder. Kconfig
destription is also improved.
Change-Id: I716fdbf7d636bbdc03b0fce27a59fd866f473246
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This refactor the way stored keys are handled to avoid overwriting
existing keys with new keys in case of pairing failed. Main goal is
to delay update of keys (including type and encryption size) until
link is succesfully encrypted with new key (legacy STK or LE SC LTK).
To fix this properly, TK is used to store STK or LE SC LTK and updates
of keys properties are done only on successfull encryption. This makes
code less error prone since update is done only in one place in code.
Also quering SMP code for current key makes sure that correct keys is
used in case of re-pairing.
Change-Id: I6b9e3d8229de522143e0d1fbfe0bd8223dad2a56
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds Exchange MTU command handler to the tester.
It allows to test if GATT Client can initiate MTU Exchange Procedure.
Change-Id: I2e50cec27fb7b944f57a4a6487138adbf126bad4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds protocol specification for SM.
Change-Id: I9c6ef377d0e4ad261e466dfed3a35713cf79de12
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
If the SDU length is bigger than the amount data received in the first
packet it means it will be segmented in 2 or more packet until the SDU
is completed.
Since the MTU required by the upper layer could be much bigger than the
ACL buffer the code now request a buffer to reassemble the SDU.
Change-Id: I286d16e185f59a8128c4357dddebdc13145dfe31
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add characterictic command requires to provide service ID to which this
characteristic shall be added. With this patch initialization will
succeed only if service with given ID exists.
Change-Id: Ie6223f293b4cac06f211556d29896b2e1ccd96ac
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling connect command in tester
application.
Change-Id: Ia35bcb33caf59b8df4a3cdc01c12d58fdeeecfe9
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This allows to display passkey and confirm if it matches remote
device.
Change-Id: I22f706b6441210ef426702ec290a05112e06a4e2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Because of the way the loopback tester works, it needs much
bigger stack when sending packets in TX fiber.
Change-Id: I360f0cf1f35e654cb139565f19f24628fb5ab5ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove testcase.ini from net/test/test_15_4 from microkernel
version temporarily.
Change-Id: I1ee5d80142c6b2210629842e5e8d83370299657d
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch adds missing connection unref in disconnect command. Also
lightly status setting was refactored.
Change-Id: Ic2502d8df15e45c4aea25632642af3d8a4fb23cc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds missing packed attribute to structures.
Change-Id: I9bcc8a677ae296e41eebb530584977660df52ebf
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch extends Bluetooth Testing Protocol with commands used
while testing IUT as GATT client.
Commands are mapped to the procedures from Core Specification to make
use of Read Supported Commands command. Based on the response to this
command tester can determine which PTS test cases should be enabled.
If the IUT don't support eg. Reliable Writes, this command won't be
set in Read Supported Commands response, so that test cases that
test this functionality won't be executed.
Change-Id: I204a295698d4b69f73d0556b172770c4fd018009
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Buffer size is 512, so uint16 type shall be used to store it's length.
Change-Id: I5abaf7d783032ff41819f7b838d4016932dece20
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch separates helper for converting uuid received from btp
command to bt_uuid.
Change-Id: If7f5423a839379763928ba5e87678697b1721d83
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
IUT shall response with Invalid Offset ATT error code, if it exceeds
value length.
Change-Id: I5c7148c96324482f198332d475742bfb44274957
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The least significant bit of opcode is not used to distinguish between
command/response or events.
Change-Id: Icaa1b6d87968e095a7f231d43e74257f5acca379
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
