Change default board for nble app to arduino_101
Change-Id: I5f8cd57c9834e38125d9e17cd4c3a96427db702a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If device is operating in security mode 3 PIN request callback
is called before connected.
Change-Id: Ie36363ae7af2398276f9cc4d07126344588b9ae6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is almost exactly the same as the peripheral app, except that it
uses CONFIG_NBLE.
Change-Id: Ia6854bce2a0babd03a3ce3251a173ce7ddbfe374
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Unified bluetooth address types will simplify tester code.
Change-Id: I6d973ff05a8a8dcabb12c9543cd4d747db3e6680
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Emulation is not supported on basic_minuteia, only qemu_86
supports emulation.
Change-Id: Id1adc6db02aa22c86207db77fb16ac7548e09dac
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Intentionally only one CCC descriptor will be added to the database.
It's because this meets the conditions to pass PTS tests.
Change-Id: Ic29608e5a9fb4cee0c576d149e5dd26498b365ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The driver has to implement the logic in an interrupt based manner.
Applying the changes to the existing drivers.
Changing ADC's API and implementation as well to follow those changes.
Change-Id: Ie0c3e3e318f619ade6be935adb064a25446cc29c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove architecture config files and have just one, they are the same
now.
Change-Id: I6d719d5409569ae8e741fce20e90e16efa701385
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of relying on the Kconfig variables use a common scheme for
naming i2c devices and use it directly in application.
Change-Id: I745af68d7c1767cc8a24f9655fa45fa33f6baf93
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch introduces the 'QMSI RTC device driver' which is simply a shim
driver based on RTC driver provided by QMSI BSP.
Some config options are independent of the driver implementation used,
so use a consistent name for them. In this case RTC Interrupt number and
Priority use the same config options for both the QMSI and DesignWare
drivers.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_RTC=y
CONFIG_RTC_QMSI=y
Change-Id: I48292406e5472e5786f3b9abbeb71016a273bfec
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
uart.h may include pci/pci.h, so add drivers/ to the include search
path.
Change-Id: Ic48a88c97c45e805ee7aec1df884cdb60d6fa33a
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
This adds the config file for x86 based platforms.
Also, it no longer clears the screen at each counter update,
as the app is writing the same amount of characters anyway.
This gets rid of the screen flickering.
Change-Id: I1db6dd4b7978b764b7538e120354fc5d010df283
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extends the i2c_fujitsu_fram sample app to do multi-bytes.
Change-Id: I20ea0e08c340cf94158ad521c27d5315e522b6de
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the config file to build for x86-based platforms.
Change-Id: I42c32966507ba822726834a200edd079c90cc96b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make the i2c_transfer() to transact messages through the I2C bus.
It is useful for I2C storage devices, as now we can send one message
containing the destination byte/block address, then send the data
in another message. There is no need to construct one continuous
data buffer to send both address and data anymore.
The drivers and sample apps have been updated to utilize updated
API when appropriate. For i2c_dw, only master mode has been updated.
Slave mode will be updated once we can adequately test it.
Change-Id: I0a811d60567367817fcc8d15f5454e5c933722e2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simplifies the nanokernel timer API so that the timeout parameter must be
specified when invoking nano_isr_timer_test(), nano_fiber_timer_test(),
nano_task_timer_test() and nano_timer_test().
This obsoletes the following APIs:
nano_fiber_timer_wait()
nano_task_timer_wait()
nano_timer_wait()
Note that even the though the new API requires that the timeout parameter
be specified, there are currentl only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
Theoretically, the current implementation would allow one to supply a
finite positive value for the timeout and the system would wait up to
that many ticks for the timer to expire. However, it is thought that
that unnecessarily complicates the nanokernel timer model and so it is
left as an unsupported option. Should that change, then that feature
could be enabled by updating the documentation.
Change-Id: I8835c5342ab5025d6f70fdfbed54a50add7568d7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel stack API so that the timeout parameter must be
specified when invoking nano_isr_stack_pop(), nano_fiber_stack_pop(),
nano_task_stack_pop() and nano_stack_pop().
This obsoletes the following APIs:
nano_fiber_stack_pop_wait()
nano_task_stack_pop_wait()
nano_stack_pop_wait()
Note that even though the new API requires that the timeout parameter
be specified, there are currently only two acceptable values:
TICKS_NONE and TICKS_UNLIMITED
This nanokernel option does not support CONFIG_NANO_TIMEOUTS.
Change-Id: Ic7f16ee30c3534115ceffa19ef8591ecc5a79080
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel LIFO API so that the timeout parameter must be
specified when invoking nano_isr_lifo_get(), nano_fiber_lifo_get(),
nano_task_lifo_get() and nano_lifo_get().
This obsoletes the following APIs:
nano_fiber_lifo_get_wait()
nano_fiber_lifo_get_wait_timeout()
nano_task_lifo_get_wait()
nano_task_lifo_get_wait_timeout()
nano_lifo_get_wait()
nano_lifo_get_wait_timeout()
Change-Id: Ie9f93e46da42ea33c32544c02ab1d70b893cc198
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel semaphore API so that the timeout parameter must be
specified when invoking nano_isr_sem_take(), nano_fiber_sem_take(),
nano_task_sem_take() and nano_sem_take().
This obsoletes the following APIs:
nano_fiber_sem_take_wait()
nano_fiber_sem_take_wait_timeout()
nano_task_sem_take_wait()
nano_task_sem_take_wait_timeout()
nano_sem_take_wait()
nano_sem_take_wait_timeout()
Change-Id: If7a4bce1bd8ec8d6410d04f3c16ff1922ff0910e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updated board to arduino_101 and updated nanokernel_objects.c
NANO_CPU_INT_REGISTER macro args.
Change-Id: I5281a84138ef031ae82cdd80ab617f94b3f712af
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
We moved away from quark_d2000_ref_board and use crb for this board.
Change-Id: Ida1fb1675134c4eff7ecd9bf2e1cd1338df7635c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Shorten the name and remove the vendor prefix. No need to add
vendor to board names.
Change-Id: I68d441121c4034276706da63d7e5420ddf317149
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename class in pci_dev_info struct to allow to use C++ compilers.
Updated drivers to use new struct.
Change-Id: I17b94cb7bc094bccd615c8389a28589bfa90cab8
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Sanity test is disabling the ADC controller before doing a read.
Change-Id: I275a94244a13e80c12e6b39267c4a25dd5479002
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
() Adds board arduino_101, arduino_101_sss to sanity check.
This will build the tests against these two new boards
to catch issues.
() Updates existing sample apps to be arduino_101_sss instead of
quark_se_ss, due to renaming of boards.
Change-Id: Ic512728d2ce581539bc3ae4c9f6524d5bf01b296
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This sample just prints 'Hello World', Nothing else.
Change-Id: I93af3fdc2de342e878bc038f937e7f1ad2231bd3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample is more than just a hello world, it demonstrates basic
kernel functionality that deserve to be its own sample.
A simplified Hello World sample will replace this one.
Change-Id: I9120daa1923f99def994e484783abe04db5b14eb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a sample app to utilize the PWM on Arduino 101 via the pwm_dw
driver. Refer to the source file header for more information.
Change-Id: I0ad0f24242185b7b99e66445629d676ffde0bba3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a real board name that can run this kernel instead of a generic
name. Basic functionality exits on this board with Zephyr.
Setup of the board is mostly similar to what we have in galileo (EFI
based)
Change-Id: Ic8554f26dcac0dbbbb6d35d863482f6207dc63c5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit also renames boards and makes naming consistent between
board name and defconfig files.
quark_d2000_reference -> quark_d2000_crb
quark_se_test_sss -> quark_se_sss_ctb
quark_se_test -> quark_se_ctb
Change-Id: Ibe6a5102edb987fe1d6ce32c8c392a87d45d6951
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define boards based on platforms/SoCs and define them under boards/.
Also unify the naming of all platform, SoC and board files and use
platform.h for platforms and board.h for boards.
Change-Id: Icfeb96479ab5800aca98c80a79bdc3cecd645314
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Galileo board is based on the X1000 SoC, so move galileo to
boards and create this SoC instead, inheriting all SoC related code
and configuration items.
Change-Id: I9b39f1b44644775ee48acae284b82bae7876fffb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
First step for adding the new board layer. Create configurations for the
various boards we support on x86 under boards with the new Kconfig variables
defining them.
The board selection is optional, that means you will be able to run
make menuconfig
and create your own .config and select any SoC.
Change-Id: If08e88e9675d13f0f0501ef6750b9424b15f5dc8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
bt_gatt_discover function doesn't take user data and therefore
bt_gatt_discover_func_t is not providing any user data. It was
always providing discovery parameterts used so just match that
in function definition.
Change-Id: I90086285d02e2ef50be1d5d25299bb1c6819fdd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds peripheral sample application that is configured
in LE SC Only Mode. It tries to set security level to FIPS right
after connection is created. Two paired devices are supported.
Change-Id: I78f3e3eeaf552c52f982035168e967016858a00b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
