This is no longer needed since commit:
7834061d12
Change-Id: If6436204b886d31be20c27e4f3d74a5c5a979e8c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure LE SC are always enabled regardles of controller used.
Change-Id: I015213eb95f97793d1a1962a1cb392c652489568
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
It is useful to have the shell emit the zephyr version number.
Output looks like this:
Zephyr version 1.3.0
shell>
Change-Id: I2608272564a5d2fe39f263c420a897d845457a98
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The application tests polling mode and trigger mode (both data ready and
anymotion triggers).
Origin: Original
Change-Id: Ic0f9400758aaf56ef95f0f3c68c872d1bfd51176
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This also enables GPIO on ATMEL SAM3 when GPIO is set.
Change-Id: I4125af4910d57bed98b0ee4967fb696e3f345e67
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The driver and port used are already configured per port, no need
to hardcode the sample to a specific driver.
Change-Id: I8056e35db1e0970ec4ad56ce14fe5654fac9cf3e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 7eb9c884bc.
This change causes failures on arduino 101.
Change-Id: I6f8620b629516a6a81c2b417aa3736752ba40873
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- CONFIG_GPIO_DW_0_BITS is not longer available
- Use default printk
- Do not enable debug
- remove useless whitelist in testcase.ini, we already whitelist
boards
Change-Id: If21795d544e268c26a757b697ce3c9f2e56db65f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
None of the configuration directives for any of the arches were
actually needed.
Change-Id: Id0bf7393b8e2c7e0f5188c50c13d7666cdfcd114
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix typos and wrap text to 80 characters.
Change-Id: I25228c1d63ad391c734be601ed1503f42b4f2468
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Rename sensor_value_type enums from SENSOR_TYPE_* to more concludent
name SENSOR_VALUE_TYPE_*. This change is required if we want to
introduce SENSOR_TYPE_* (SENSOR_TYPE_ACCEL - if the sensor/driver
supports accelerometer, SENSOR_TYPE_MAGN - etc.) in the future.
Also it is more clear with this notation what these enums are referring
to.
Change-Id: Ic58e29288669e10c0695e0f86f59b0e57f7ac38c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Use string literal concatenation to break the sample text.
Change-Id: I0729b113e80d3efec909603fbb143d1bc515f165
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This will allow this sample to run on systems with less than 8K SRAM.
Change-Id: Id3a1c826cfade09f91bc3b0dba3c98e386f5ab06
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Other IOs use this format, so lets be consistent and use
I2C_0 instead of I2C0 and I2C_1 an instead of I2C1.
Change-Id: I591ab08e14bd533ef0fac38e596559da783863b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
gpio_set_callback is meant to be deprecated and thus modifying the
sample to use the new GPIO callback API.
Change-Id: I822cd1c81575834d40926c56cd61b87884230594
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Set the IPv4 address, netmask and default router addresses
that are used for automatic testing.
Change-Id: Iebddc42c56dceeb089af7878102f8a73c30f0b74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv4 address is set properly for testing purposes.
Change-Id: I996e7435276f65dbb642aa9ab99c37cd842d4b39
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP is activated, then the echo-server application starts
to listen TCP socket and reply data to caller. For TCP
connections, the application data is not reversed because
it would make it difficult to verify the data in the sender
side. The TCP packets might be split into smaller chunks by
echo-client so client would have some unnecessary difficult
to verify the data it sent if we reverse it.
Change-Id: Ic146dfc75825bc8057968c581bfe9d3285e0d7b4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can enable TCP server (listening socket) support in the
IP stack. This commit does not yet have TCP client (connecting
socket) support.
Change-Id: I75dd02a81addc1d1e026463b53631d56378157df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adapting GPIO samples to use the new callback format.
Change-Id: I944dce4faeeee30117edbd7a065e40caa0b7ed66
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
To show possible usage of the device_busy_xxx() APIs.
Meant to show how drivers and power policy manager can use them.
Change-Id: I49d1dedd9a7b8d6bf09080c6c7243f0666330941
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Fix naming and use a global driver name for instance.
Change-Id: I30a54cb9c20773e1b6fdc57b934aa564612a6c45
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use same string for driver name used for binding and fix
sample app to work with multiple drivers, not only DW driver.
Change-Id: I4d40aa9d4e83fcf16dc883bb74c3f0e3e30e3502
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also, lower the clock for the SPI bus in order not to hit the DW
controller CS issue.
Change-Id: I69c4211bfa6efb85117185e2ae813dd7c4915a7a
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
This app is needed for Arduino101 only, or boards using the Curie
module.
BMI160 interrupt pin is connected to AON GPIO controller. The driver
handling the AON GPIO controller runs on x86 core. Even though, the AON
GPIO controller is accesible to ARC core too, the current implementation
for Designware controller driver does not allow it. Hence, this app will
register a gpio callback and signal the ARC core through IPM.
Other boards that use a gpio pin on the regular GPIO controllers don't
need this app.
Origin: Original
Change-Id: I225ca60735e39c7a47693dc53237f48cd9ac2680
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
The movement is needed because on some boards, like Arduino101, the
current GPIO driver implementation does not allow for receiving
interrupts from AON GPIO controller directly on ARC core. Hence, IPM is
needed to relay the interrupts from x86 to arc.
However, other boards that can use a regular GPIO intterupt or users
that connect a BMI160 chip separately, can still use the ARC application
as is.
Change-Id: I58dd77edd45ea2b071db5b99073eb15722847bfe
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Those samples are confusing test suites by not generating
the expected zephyr.bin binary.
Change-Id: I4fb81782bacafb4f259e088df4b2518faa6f47cf
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
