- Set default board to Quark SE Debvboard
Jira: ZEP-690, ZEP-760, ZEP-782
Change-Id: I7f7cc45b527a116f88cf45796e46b429ae6f0060
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
HID over GATT Profile Specification states:
'The HID Device shall use LE Security Mode 1 and either Security Level
2 or 3.'
Change-Id: I2cfc1d9df76b4e8a8b2be7e87d18a7a5f3a19ea8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a sample that implements HID Service peripheral, the current
descriptor map is for a generic mouse so when connecting to a Linux box
it will create a input device like in the following output:
input: Test HoG mouse as /devices/virtual/misc/uhid/0005:1D6B:0246.0035/input/input98
hid-generic 0005:1D6B:0246.0035: input,hidraw2: BLUETOOTH HID v5.29 Mouse [Test HoG mouse] on XX:XX:XX:XX:XX:XX
Change-Id: Iccf07926ecc7363f4f47e1aa9df506a722e7e2d3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HoG service sample which can be shared with application
samples.
Change-Id: I6893ff409b254d0a616b2ba558fd629ce9edf1d4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a timeout to switch from configuration mode to beacon mode
following the recommended behavior from the spec:
The connectable timeout should be at the very least 30 seconds to let
enough time to user to start a configuration application.
Change-Id: I8f262c447ed1622e377fd7a05dde78c7b6b0560d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Treat the sensor subsystem as an independent board that can send
messages to UART and disable IPM and the messaging interface. IPM
can be enabled by applications that require such interface.
Fix all samples that are affected by this change to make sanitycheck
pass.
Jira: ZEP-451
Change-Id: I3df6af16adefaefec02b97778d6c68ffc920ac35
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed tests that will fail when using ISSM toolchain because
there is no g++ inside.
Example:
export ZEPHYR_GCC_VARIANT=issm
export ISSM_INSTALLATION_PATH=<ISSM PATH>
sanitycheck -p arduino_101 -p arduino_101_sss -p quark_d2000_crb \
-p quark_se_devboard -p quark_se_sss_devboard
Change-Id: I532d4f0e0095472cbf3428cb8355167a320a10a0
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Casual building in the tree leads to regular messups where I forget to
clean up the outdir first when switching platforms and the build fails
in strange ways.
Put a $(BOARD) subdirectory under outdir, and use that at $(O) when
the user does not provide an output directory.
Note that "make pristine" continues to remove the entire outdir,
including other architecutres (so as to make the tree pristine).
Also update a few spots where outdir was mentioned in documentation to
clarify the new scheme.
Change-Id: I365eec06ea440f17380b9f9ace5f5d34b9bed4dc
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Change the api argument format following the API
argument definition change in the driver. Some
definitions of CONSTANTs were changed accordingly.
Correct some comment error.
Jira: ZEP-642
Change-Id: I1b34640aa70f1597076e035e2b3b576d8337129a
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The KNOWN_ISSUES file describes issues and workarounds for the NATS
and DNS sample applications.
Change-Id: I9a33a82073707dbdd4109e0740108b99c42ad772
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Excluded Quark D2000, Nucleo F103RB, Olimexino STM32 for the
sample test_15_4. Boards doesn't have support for 15.4 neither
enough space.
JIRA: ZEP-738
Change-Id: I963509a77cdf6a8ff2efee2f2d4a498e3c07f9b5
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Kconfig allows selecting NETWORKING_WITH_15_4_TI_CC2520 even if the
current board doesn't support it, and also selects it by default. This
breaks building the 15.4 sample with qemu_x86. Add a config option for
having CC2520 support and enable the choise only if it is available.
In addition, remove unused function from iee802154 code, as it now
fails the tests.
Jira: ZEP-697
Change-Id: Ib082f82acdd0f86d3306bbd3bb827f61b0fd0be1
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
According to last comments posted in ZEP-632, the unref routine must
be called only when net_send reports an error.
Jira: ZEP-632
Change-Id: I11553edf2c7d686c3e58617c2e05b6f18962955e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
