Due to huge delays with DEBUG log level change it to INFO.
Change-Id: I81caf78fc6e9e064c2ed8e18caa99351028af62a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In a case transmit is failed send ack to the driver with zero sequence
number which is not used for valid seqs.
Change-Id: I1047de9ab5de636c5a8983f31376046757c4dc0c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Following replacing semaphore with timeout semaphore transmit may not
be finished returning error after which communication stalls. Allowing
3 retransmits solves the issue.
Change-Id: Ibad05c2eac43dd6bb0ed72aaf16a7a2ef4185067
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Having 1024 bytes was really unsufficient and creating a lot of weird
bugs everywhere.
Change-Id: Ib642744fa6dfc9f3a699a0dc2f0c1783dc6f87b2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Semantic has changed in k_sem_take in comparison with legacy
nano_sem_take.
Change-Id: I06129b6f15f66266919bf371c2358e5634109156
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to test echo applications with 802.15.4 L2 directly in
qemu.
Change-Id: I0edccd8c39360421dc77e0064147221d86877bdf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous commits support auto configured IPv6 addresses so no
need to manually tweak the address settings.
Change-Id: Ie641212981a04229721c84990a54876977d9cfc4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes the case when we receive large amount of
data and then copy it into new fragments. If the MTU is larger
than the fragment size, then it is possible that we might
overwrite net_buf memory and crash. This is typical in ethernet
network.
Change-Id: Ib1c65819c3bc718ec04f558e3df235246b5655dd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The DTLS client will not longer use the legacy IP stack.
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I7402a188fc7501873d98d3b6cb2f03ee51f3506b
This commit allows echo-server to listen all defined addresses
specified to its network interfaces.
Change-Id: I52874210f6987c75d7921e514399a9eda55911bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
SLIP buffer size depends on maximum IEEE 802.15.4 frame size and start
byte.
Change-Id: I1cb0a848dce6b0c85bf11408733d777f7a3b03c9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove unneeded SET_HW_ADDR_FILT since it is handled by other
commands and add missing opcodes.
Change-Id: I4b6488e6cee742b79c16789e817795138506dc77
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It's 127 by default as soon as 802.15.4 l2 is selected.
Change-Id: I6c29d88bb3277a15fe54693027caf320bc3d9fc4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This demo showcases how to expose resources that are exposed using the
link-format feature.
Change-Id: Iad9421082fae3212cae58e6d6e9b88fa170678b8
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Forcefully set the IPv6 address in echo-client so that we
can use that address when sending data. Normally this should
not be done like this as the system should autoconfigure itself.
Change-Id: Id24f9aa84b30a3da941bb6b9e4522c7218687e12
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Makefile modifications to be able to be compiled with the unified kernel
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I0fce5d3f6b28df0cff4b7c0b554a787996e8c966
Print packet hexdump and interrupt related debug only when
VERBOSE_DEBUG is enabled.
Change-Id: Ieb997e3537a9a2316d1435372948004dd93babab
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update information related to simple web server info.
Change-Id: Ib0155c116a3d53b374a7401eb6e9d1599390dba3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Print packet hexdump only when VERBOSE_DEBUG is enabled and remove
debug print in empty functions.
Change-Id: Ifd3ae59001233f0237c4b7575bd92607c93e2ea0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Forcefully set the IPv6 address in echo-server so that we
can use that address when sending data. Normally this should
not be done like this as the system should autoconfigure itself.
Change-Id: I99041539c50f994f5d3ddaabaf5cac8599d82078
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a sample app using ECJPAKE crypto algorithm on DTLS, using mbedTLS,
native IP stack and the enc28j60 SPI Ethernet Driver
Change-Id: I658c3d9a54cfdd164a4147903125400f223c6e0a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
It is the responsibility of the callback to release the buffer.
Change-Id: Id80f5f9ca190868a7c173994bb7ec7ee7f6251b7
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When retrieving the address of a peer from the net_buf, care should be
taken so it happens before the 'data' pointer of the buffer is modified,
which causes the macros to retrieve the address from invalid positions.
Change-Id: I466fb989119ab5f7d0ac3899979670675bdaa946
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This change is related to patch called
"net: Adapt to new behavior of net_buf_frag_add"
This version removes extra net_nbuf_unref() from
the code. The unref was done because net_buf_frag_del()
did not remove the double ref from the list element.
Because of the other patch, the list does not have
double ref any more, so we need to remove the extra
unref in couple of extra places.
Change-Id: If90e01c24b9b4e68afbfa283850d2a1ecb3065ed
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change definition name suffix to WPANUSB
Change-Id: I3456ebff061866a67b7a07b33f6ff83a31a2d7a8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit updates the README files to reflect that ZEP-1036
is already solved.
Information about ZEP-1097 and ZEP-1098 is now included.
Change-Id: I3c83160962d308d374823e086bbf083dca988606
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit modifies the conf and Makefile files of the DNS client
application.
Inside the Makefile, the CONF_FILE variable is updated to include
the BOARD name, therefore prj_'board_name'.conf is used from now on
to refer to the conf file. The right conf file is selected by passing
BOARD='board_name' to make.
Configuration variables at the conf files are also homogenized.
Change-Id: I6f5aaad0b52d458bceb90b315aba2b31f085c0a0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Implement serial-radio protocol used in Contiki-based border routers
to interact with 802.15.4 devices connected over serial or USB-serial.
Change-Id: I938b34ca32ae7a08e5d48e3bea585cda6c98c113
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This creates initial TCP handling logic but does not yet
enable fully working TCP connection.
Some of the connection logic is taken from FNET TCP
implementation.
Origin: FNET 3.6.1
URL: https://github.com/butok/FNET/blob/master/fnet_stack/stack/fnet_tcp.c
Change-Id: I1e100d9fa9c91437562b933d94d0bd3db1a5885e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current net_nbuf_write() api just appends data to last fragment. And
doesn't write data based on offset. That's why renaming this api.
New net_nbuf_write() apis based on offset will be coming soon.
Change-Id: Ie8e13e5f6091a279b62b6d8b0b3928a5187e75b0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit adds support for the Arduino 101 board with the
ENC28J60 Ethernet module.
Change-Id: Ib852e9cfb2b3b2188d3320e00d6bc24620e187f5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This is a sample app using ECJPAKE crypto algorithm on DTLS, using
mbedTLS, and native IP stack
Jira: ZEP-900
Jira: ZEP-943
Change-Id: Ica17b047aab11b989d3e8c8f6ac1b79e3041053a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This ports zoap to the native stack.
Just for reference, and totally not scientific, here are the numbers
using the old stack:
$ size outdir/qemu_x86/zephyr.elf
text data bss dec hex filename
34657 10316 16916 61889 f1c1 outdir/qemu_x86/zephyr.elf
With yaip:
$ size outdir/qemu_x86/zephyr.elf
text data bss dec hex filename
30575 9148 6164 45887 b33f outdir/qemu_x86/zephyr.elf
Jira: ZEP-818
Change-Id: I7992a3e2af7d419081ee5a64d7cc2d49fb628ead
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Extends the echo server and echo client samples to work with YAIP
network stack with ethernet L2 layer and ENC28J60 ethernet device
on Arduino 101 boards.
Jira: ZEP-859
Change-Id: I242e5555aff18741bf00a551424b081b5396f4b3
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
This commit adds the DNS Client sample app on top of the new native
IP stack. This sample app supports IPv4 and IPv6. See README_IPv4 and
README_IPv6 files.
Origin: Original
Jira: ZEP-793
Jira: ZEP-855
Jira: ZEP-975
Change-Id: Id78bd634c44e216fd45b395c91d95b71ef68c976
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit removes the legacy DNS client sample code.
This patch is part of a commit series that will add support for
DNS client services on top of the new native IP stack.
Jira: ZEP-793
Jira: ZEP-855
Jira: ZEP-975
Change-Id: Ieb3366b21a365b8f77e576109c64c0fc4218aabb
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
