Assert if the UART device is NULL to help with debugging whenever
there's an issue locating the correct UART instance.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use Device Tree,and in particular a new 'bt-c2h-uart' to select which
UART is being used to communicate with an external BLE Host when acting
as a Controller.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The assumption that the value handle is one past the attribute handle
works for Zephyr servers but may not be true for others. Avoid the
hard-coded system-specific assumption.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add nordic boards to the whitelist to ensure that compilation is
checked by the CI.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removed Quark D2000 SoC files and first-order related DT bindings.
A few config options have been moved from the CONFIG_* space to
the DT_* space, as they were defined in the D2000 Kconfig files
and "leaked" into the other Quark trees.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample has to be operated manually (it's a USB DFU implementation
that needs to be plugged into a host to validate). Sanitycheck is
failing right now becuase it tries to flash and run it, and doesn't
see a harness declaration.
Set it to build_only when run under sanitycheck.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Right now this fails needlessly under sanitycheck for lack of a
harness declaration. It's short, just stuff in a simple regex check.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The regexes for the power states entered were in the wrong order, and
this tests takes 2 minutes to get to that point, blowing past the
default sanitycheck timeout.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
YAML document separators are needed e.g. when doing
$ cat doc1.yaml doc2.yaml | <parser>
For the bindings, we never parse concatenated documents. Assume we don't
for any other .yaml files either.
Having document separators in e.g. base.yaml makes !include a bit
confusing, since the !included files are merged and not separate
documents (the merging is done in Python code though, so it makes no
difference for behavior).
The replacement was done with
$ git ls-files '*.yaml' | \
xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//'
First pattern removes ... at the end of files, second pattern clears a
line with a lone --- on it.
Some redundant blank lines at the end of files were cleared with
$ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}'
This is more about making sure people can understand why every part of a
binding is there than about removing some text.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix misspellings and doc issues missed during regular reviews (including
some files without a trailing newline)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This updates all client modules to const char processing of
setting names.
Update of peripheral_dis sample
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This is done only for testing purposes, in real life the socket
would be closed if it is not used or needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Clean up some stray references to cmake in doc, boards and
samples that don't make explicit use of the zephyr app extension,
as well as other minor doc fixes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Sample was not compiling for nordic boards because RTC_0
instance was not enabled by default and RTC_0 device is using
different DT define.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Cleanup references to boards in some of the example and use the same
boards through the examples. Other minot cleanups and make the text more
generic and not specific to certain boards.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Using void pointers as universal arguments is widely used. However, when
compiling a 64-bit target, the compiler doesn't like when an int is
converted to a pointer and vice versa despite the presence of a cast.
This is due to a width mismatch between ints (32 bits) and pointers
(64 bits). The trick is to cast to a widening integer type such as
intptr_t and then cast to
void*.
When appropriate, the INT_TO_POINTER macro is used instead of this
double cast to make things clearer. The converse with POINTER_TO_INT
is also done which also serves as good code annotations.
While at it, remove unneeded casts to specific pointer types from void*
in the vicinity, and move to typed variable upon function entry to make
the code cleaner.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Place audio buffers in LPSRAM using linker section attribute
for the 2-way audio sample application
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Place audio buffers in LPSRAM using linker section attribute
for the I2S audio sample application
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Place audio buffers in LPSRAM using linker section attribute
for the digital mic audio sample application
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Hdc1008 driver is renamed into ti_hdc to prepare it to support all
available Texas Instruments HDC sensors (e.g. hdc1080, hdc2080).
Signed-off-by: Nikos Oikonomou <nikoikonomou92@gmail.com>
We are not interested in whether the close() call succeeds or
not when the connection is terminated.
Coverity-CID: 198878
Fixes#16569
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
On some systems the sample was failing validation because
the coverage data would be emitted before the sample had
a chance to print anything else.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It does make sense to initialize USB console after USB Device stack.
Note that the value is selected only if we specify USB_UART_CONSOLE
in prj.conf, not in menuconfig afterwards.
Fixes#16518
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This extends the UpdateHub library code to allow the
use of IPV6 for communication.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
This extends the UpdateHub library code to allow the
use of CoAPS/DTLS for communication.
Refs: #13039.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
UpdateHub is an enterprise-grade solution which makes simple to
remotely update all your embedded devices in the field. It
handles all aspects related to sending Firmware Over-the-Air(FOTA)
updates with maximum security and efficiency, while you focus in
adding value to your product.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
prj_tickless.conf lacks the CONFIG_PM_CONTROL_OS=y option which
results in the sample failing to build with this config as it leaves
sys_pm_ctrl_disable_state() and sys_pm_ctrl_enable_state()
undefined.
Add the relevant options from prj.conf to fix the build.
Tested on nrf52840_pca10056.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
This allows setting a custom pointer to be passed back to the complete
callback at expense of increasing the buffers in 4 bytes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
main.c in the sample was registered to the logger as 'log'. Changed
to 'app'.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This changes the use of a static and fixed temperature value to using a
read_callback which will either return the previous dummy value or
gather real temperature data from a supported sensor (for now only
FXOS8700 which is available e.g. on a FRDM-K64F).
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Hardware PWM make sense for servo control even in a sample, add HW PWM
choice for NRF52 family, which support it.
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
Refactor wpanusb sample using new descriptor API, use endpoint index
instead of hardcoded endpoint address.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
I2C_STM32_V1 and I2C_STM32_V2 are Kconfig symbols used to
select STM32 I2C driver variant based on I2C IP available on a
given STM32 SoC.
Being SoC dependent, they are automatically selected in soc/
if CONFIG_I2C is set. Then there is no need to define them at board
level, nor for a specific application like this is done in
some sample or test applications. Remove these definitions when
this is the case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
As the prj_base.conf was renamed to prj.conf by commit
4e5300ba7f, the documentation
needs some fixing too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
GATT long messages require buffers to store multiple packets. The actual
configuration for the bluetooth peripheral sample defines only two
buffers to store these messages. As the default ATT payload size is
18 bytes, the maximum payload size for a long ATT message is 36 bytes.
As the variable `vnd_long_value[]` has a defined size of 74 bytes, it
cannot be fully modified due to the 36 bytes limitation.
Set CONFIG_BT_ATT_PREPARE_COUNT=5 so all the maximum payload size goes
to 90 bytes and all the 74 bytes can be written to `vnd_long_value[]`.
Signed-off-by: Joao Cordeiro <jvcc@cesar.org.br>
on non-XIP system, SRAM is the default region, and relocated .data
section and .bss section of SRAM shouldn't be inserted between
_image_rom_start and _image_rom_end, because the memory region between
_image_rom_start and _image_rom_end will construct the mpu ro region.
Also for the newly added memory region on non-XIP system, the
relocated .text secition and .rodata section should also be mpu aligned.
Fixes: #16090.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Instead of using the now removed overlay files, use the SHIELD=
command-line option for testing the WNC-M14A2A modem.
Signed-off-by: Michael Scott <mike@foundries.io>
Sample walk through:
1. CPU 0 will wake up CPU 1 after initialization
2. CPU 1 will send to CPU 0 an interrupt over MHU0
3. CPU 0 return the same to CPU 1 when received MHU0 interrupt
4. Test done when CPU 1 received MHU0 interrupt
The wake up second core and private core ID are soc specific.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add a sample application that demonstrates how to use the ADXL362 with
data ready and threshold triggers.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Add a minimal sample that showcases minimal ROM sizes. It can be built
in several configurations, all very restrictive when it comes to
features enabled in order to verify the fact that we can fit in small
devices and to be able to accurately measure the sizes of the kernel's
basic features.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit extends the CAN api can_send function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between sent masseges
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN api attach_isr function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between filter matches
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
IWDG driver for STM32 doesn't support the callback parameter.
The patch adds necessary workaround for STM32.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Otherwise, it can lead to warning like:
main.c:80:10: warning: format '%d' expects argument of type 'int',
but argument 2 has type 'socklen_t' {aka 'long unsigned int'}
[-Wformat=]
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
sntp_request() was deprecated and superceded by sntp_query(), which
provides better time resolution.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
sntp_request() was deprecated and superceded by sntp_query(), which
provides better time resolution.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Synchronising the init procedure to initialise the mesh
state only after the settings have been loaded.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
After receiving Generic Level Move set/set_unack message, generic
level state should move towards positive or negative extreme end
(which is depend upon sign of delta value) till it not get interruped.
This commit has introduced this feature.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
If Node Lightness is in downward transition & received Generic
onoff message to set state equal to 1 then Node transaction get
stopped in between. Ideally it should reach to default lightness
value if it is non-zero. This commit has solved this bug.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This commit upgrade the implementation to reduce complexity in
algorithm. Previously there was different timers for lightness
as well as temperature transitions. But at time only single
transition is remain activated & hence there is no need
of multiple timer for each entiity.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added .inf driver file for Windows.
CDC examples will now work on Windows.
Note:
This .inf is not signed and may cause problems during installation.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Unique PID is required for each sample in order
to be recognized by host.
When creating a new sample:
- Add USB_PID_<SAMPLE_NAME>_SAMPLE
in samples/subsys/usb/usb_pid.Kconfig
- Create Kconfig file in your sample's subdirectory, containing:
config USB_DEVICE_PID
default USB_PID_<SAMPLE_NAME>_SAMPLE
source "Kconfig.zephyr"
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Add a sample application for showcasing the functionality of the
Holtek HT16K33 LED driver with keyscan functionality.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Adds required Kconfig options for flash driver.
Adds FatFS filesystem for flash disk.
Fixes#14459.
Note: As USB MSC does not support multiple disks (see #14937),
only one (flash by default, modify CONFIG_MASS_STORAGE_DISK_NAME
to "RAM" for RAM disk) will appear to host.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Inside void main(void) result of function sensor_trigger_set() is not
checked which might result that function can't set sensor type
and that error can't be handled.
Coverity-CID: 186196
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
According to the Apple iBeacon spec chapter "2.1 Advertising Packet",
"beacons must use a non connectable undirected Advertising PDU,
ADV_NONCONN_IND". Refer to https://developer.apple.com/ibeacon/
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
settings_read_cb is defined to return ssize_t and not size_t. This
also eliminates several Coverity warnings.
Fixes#15765Fixes#15768Fixes#15771Fixes#15774Fixes#15778
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes use of BT_GATT_SERVICE_DEFINE to statically define services
for services that are not required to be dynamically registered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
Allow for including arbitrary data in net_icmpv6_send_echo_request()
that will be echoed verbatim by the receiver.
This allows to use ICMP echo for diagnostic use cases, e.g. by testing
packet framentation (large payload) or measuring round-trip-time.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
main function is not necessary.
And without main here, it is possible to import these
samples zperf files in another project.
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
1. Output what steps the app performs, so it doesn't look to user
that it simply hanged.
2. Don't use infinite timeouts, because that will hang.
3. Clearly note which requests are for IPv4 vs IPv6 server.
4. Define IPv4 gateway. This sample is configured to run against
SNTP on local Linux host, but standard distros (e.g. Ubuntu) don't
run SNTP server by default, so usual outcome for running this sample
will be timeout. A realistic way to get successful output would be
to run it against a server on the Internet, for what a gateway is
required.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The function net_pkt_get_info() is found in net_pkt.h and not
in buf.h. This caused
"implicit declaration of function ‘net_pkt_get_info’"
warning if CONFIG_NET_BUF_POOL_USAGE was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Migrate from "legacy" PCI support (drivers/pci) to new PCI(e) support.
The e1000 driver is merely for testing with QEMU and so should not be
a model for the use of PCI(e) functions. Consult instead "real-world"
PCI(e) drivers like the NS16550 UART (drivers/serial/uart_ns16550.c).
Signed-off-by: Charles Youse <charles.youse@intel.com>
In this commit, a config.h header file is added to support the case
when the NET_CONFIG_SETTINGS is not used. main.c is also modified to
enable platforms that do not support IPv6. These changes are necessary
in order to allow cc3220sf_launchxl support.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Sample code for AMS (Austria Micro Systems) ENS210 temperature and
relative humidity sensor.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Sample code for AMS (Austria Micro Systems) Indoor Air Quality Sensor
reading VOC and equivalent CO2 values.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
In order to generalize the currently specialized nRF51 IC setup hook,
make the following changes:
- Generalize the hook to bt_ic_setup()
- Use a weak NOP version by default
- Move the currently existing one to the board folder
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Enable the GPIO reset pin feature of nrf52840_pca10090
on pin P1.02 and the wait NOP feature of the controller.
These are used to let nrf9160_pca10090 synchronize the
HCI communication with nrf52840_pca10090 controllers.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The patch provides flash offsets appropriate for running
this sample on nrf9160_pac10090 targets.
As that sample is small one, it is done with assumption that image_1
flash partition is empty.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Write protection was not disabled prior erase call.
It used to work before only because nrf driver had not check
the protection before erase execution. This behavior was changed in
order to align to zephyr - which implied requirement for this test fix.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
To support mass storage over USB in RAM we need a board with
sufficient RAM. Fix failing tests for boards with low memory.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable harness so we can execute smoke tests on the hardware with
command line:
sanitycheck --device-testing --device-serial /dev/ttyACM0 -p <BOARD>
-T samples/subsys/usb/hid
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixed using chipselect with seperate chipselect GPIOs and how they were
referenced from/in DeviceTree.
Also configure the device during initialization so it's ready to go
after init.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Project configuration to run the CAN sample with the MCP2515 attached
via SPI as the CAN controller.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
This commit enable Bluetooth SMP Service which will help
us to do Device Firmware Upgrade over thr air. By default
it is not enable.
Reference: $zephyr/samples/subsys/mgmt/mcumgr/smp_svr
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Add config overlay for cdc_acm+dfu composite configuration.
Manual configuration over menuconfig may be error-prone for
the user because then FLASH_LOAD_OFFSET and FLASH_LOAD_SIZE
should also to be set to appropriate values.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
In order to fit in SRAM, reduce the CONFIG_BT_MAX_CONN from 20 to 16 in
the configuration used for the BBC micro:bit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the Controller counterpart to CONFIG_BT_WAIT_NOP so that it
issues a NOP Command Complete event after booting up, to signal to the
Host that it is ready to receive HCI traffic.
Fixes#15333
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Currently coverage is enabled only in platforms which dont have
multiple memory regions. This sample was designed to emulate
different memory regions. This in conjunction with gcov which
might instrument data in different memory regions will not work
as expected. Therefore disabling gcov for this sample.
Fixes: GH-15107
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
We have actual tests now under tests/kernel/mem_protect/userspace
and tests/kernel/mem_protect/mem_protect that exercise all the
memory domain APIs. This old test is superfluous.
Fixes: #15178
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
More buffers are need to build for sam_e70_xplained board
to work out of the box. Added board specific conf file.
Fixes#15096
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Patch 8af3df3519 changed logic and did not take into account 2 extra
bytes.
...
Precise data bus error
BFAR Address: 0x766e4900
***** Hardware exception *****
Current thread ID = 0x200004e8
Faulting instruction address = 0xddf4
Fatal fault in thread 0x200004e8! Aborting.
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
telnet_console driver is not compatible with new shell module, hence is
not working. Switch the telnet sample to use new TELNET shell backend.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
net_pkt_sendto uses size_t as parameter for len so the value would be
treat as unsigned which may cause and invalid memory to be read.
Fixes#14950#14955
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch enables the GPIO driver by default on all boards equipped
with an nRF SoC (all boards having `CONFIG_SOC_FAMILY_NRF=y` in their
`_defconfig` file).
In vast majority of cases the driver is needed, so it is more
convenient to enable it at board level than in particular
applications.
And if the driver is undesired for some reason, it can be still
disabled in the application config.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There are two sensor samples be modified for a more explicit log when
no sensor connected or not connected correctly. Rather than a horrible
hardware fault, which may misleading beginner.
1. bme280
2. sx9500
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
Updated test harness to check for a second instance of
"Watchdog sample application". This is to confirm the
board did reset itself.
Signed-off-by: Cinly Ooi <cinly.ooi@intel.com>
The IV Index is always a 32-bit value, so using u16_t for it was
confusing. Create a define for it, similar to other constant values,
to get rid of this confusion.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adding a section to the sample's documentation to give some specific
instructions on how to try it with TLS enabled. This should be helpful
for users who are not knowledgeable with regards to creating/setting up
TLS certificates.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Rename power managment subsystem Kconfig options describing minimum
residency to make them easier to identify with respective policy.
Following is a detailed list of string replacements used:
s/SYS_PM_SLEEP_(\d)_MIN_RES/SYS_PM_MIN_RESIDENCY_SLEEP_$1/
s/SYS_PM_DEEP_SLEEP_(\d)_MIN_RES/SYS_PM_MIN_RESIDENCY_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add SYS_POWER_ prefix to HAS_STATE_SLEEP_, HAS_STATE_DEEP_SLEEP_
options to align them with names of power states they control.
Following is a detailed list of string replacements used:
s/HAS_STATE_SLEEP_(\d)/HAS_SYS_POWER_STATE_SLEEP_$1/
s/HAS_STATE_DEEP_SLEEP_(\d)/HAS_SYS_POWER_STATE_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit cleans up names of system power management functions by
assuring that:
- all functions start with 'sys_pm_' prefix
- API functions which should not be exposed to the user start with '_'
- name of the function hints at its purpose
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
There exists SoCs, e.g. STM32L4, where one of the low power modes
reduces CPU frequency and supply voltage but does not stop the CPU. Such
power modes are currently not supported by Zephyr.
To facilitate adding support for such class of power modes in the future
and to ensure the naming convention makes it clear that the currently
supported power modes stop the CPU this commit renames Low Power States
to Slep States and updates the documentation.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This sample did not enable gpio driver, so nothing happens after flash
firmware into a board.
By enabling gpio driver to fix it.
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
Making a clean slate for some pylint CI tests. Only enabling relatively
uncontroversial stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add qemu ethernet driver overlays for big_http_download and
dumb_http_server samples, which are default integration samples/
tests for TCP stack. This change follows up after similar addition
of such overlays to other samples (and smsc911x overlay addition
to these samples).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Clarify what iPerf version was used when testing this sample
application. It was iPerf 2.0.9 which worked ok, for example
iPerf 2.0.13 did not work properly with UDP uploader (client)
mode.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Try to construct a proper iperf client header to the payload
as the server expects that. It is not sure if this is needed
or correct as there is no proper documentation for the iPerf2
protocol.
Fixes#14665
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Try to construct a proper iperf client header to the payload
as the server expects that. It is not sure if this is proper
way to do the iperf header as there is no documentation about
iPerf protocol anyway (except the iPerf source code).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of relying on overlays which requires to write overlay for
every board (100+) define console device name.
Fixes#14698
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If there are several queued interrupts we can miss some of them. Use
while() loop to catch them all.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The 14 individual cases that use these four config files are now
passing reliably when SMP is enabled, after the "Mark sleeping threads
suspended" scheduler fix. Turn it back on.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Checking the return of sensor_trigger_set and if it fails log the
problem and exits.
Coverity CID: 186196
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
net_pkt_read may fail in which case the error shall be reported back
instead of always assuming the whole packet was read.
Fixes#14817
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The dhcpv4-client is more usable if it has net-shell. For testing
with qemu_x86, the e1000 overlay config is very useful.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Changing the example to not use IPv6 when it is not configured,
given IPv6 is not enabled on some platforms such as cc3220sf_launchxl.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
A few more test cases that are measurably unreliable when run in SMP.
For the most part these work most of the time (though the semaphore
one was pretty borderline -- I measured about 25% failures), but are
measurably unstable against the backdrop of known qemu instability.
Something is clearly going on and we need to come back to these to fix
threadsafety issues.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
`CONFIG_NET_L2_BT` no longer forces required BT configuration, but
depends on a user to set a valid configuration instead. Hence, we
need to select a proper configuration in the overlay config file.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This patch adds the overlay when the echo-server is running on Linux and
echo-client is running on Qemu.
Fix: #14654
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This sample is often the first one used as reference for Bluetooth
Mesh, so it should have a good configuration as a starting point.
Comment out the LPN options to eliminate Kconfig warnings, since the
LOW_POWER option they depend on is not enabled. Also disable
INIT_STACKS since that's only needed for fine-tuning the app
configuration, and otherwise only causes unnecessary spam in the
console.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The sample was bitrotted because sample.yaml was missing and no
build checks were done, so we missed the case when TCP header
API function was removed. This is now fixed by using still available
UDP header API (to get the port numbers). Also fixing debug print
as it were giving compile warnings.
Fixes#14608
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The sanitychecker needs sample.yaml in order to compile test
the promiscuous mode sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It's not necessary for this sample to output to the user
(it uses printf) and saves over 5K of ROM size, eliminating
some build failures on Quark D2000.
Fixes: #14476
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The current flash configurations for all nRF52840's in Zephyr is
VERY constrained when it comes to allowing samples any space for
storage or custom areas. It only leaves the last 4 pages of flash
for "storage".
The nRF52840 is also capable of using OpenThread which defaults
to using the last 4 pages of flash for storing OpenThread-related
network data.
This means that while using OpenThread under any configuration
designed to use mcuboot partition slots, there is no space left
over for storage of any kind.
Let's adjust the partition table to set storage at 8 pages of
flash (32k). This fixes the conflict with OpenThread and leaves
room for future use cases that may arise.
Signed-off-by: Michael Scott <mike@foundries.io>
It was possible to freeze the application by pressing the user button
too frequently. This was likely due to the stack not keeping up with
the send requests and running out of buffers.
Add rate-limiting to the app, so that at most one message per 500ms
can be sent. Also add a user message if the user presses the button
too many times in rapid succession, and inform the other badges of
this misbehaving user.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
No need to build the net_pkt, just send the buffer directly.
Let's reuse already parsed ip/proto headers as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to build the net_pkt, just send the buffer directly.
Let's reuse already parsed ip/proto headers as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using new net_pkt r/w API and so on.
This sample would still need to be using socket API instead.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Configure lvgl defaults for imx rt boards in their respective board
defconfigs rather than the lvgl sample application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The CANBUS sockets require "struct can_frame" to be used in order to be
compatible with Linux code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The CANBUS sockets require can_filter to be used in order to be
compatible with Linux code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added a warning that will abort build without disks.
Added a default configuration for nrf52840_pca10056.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
This patch checks the return values of setsockopt.
Fixes: #14392, #14402
Coverity-CID: 195897, 195848
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Overhaul the Bluetooth documentation to split it into manageable units
and include additional information, such as architecture and tooling.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As there is no shell submodules any more, the "zperf" command
needs to be written in every command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Patch (3206568e43) changed network
interface numbering starts from 1. The index 0 is reserved.
So use api to get default interface index for packet socket sample.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commits adds an overlay file with the SOCKS5 symbol that is needed
to run MQTT with a proxy, and extends README with instructions on how to
use it with the default and custom settings.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The VLAN documentation had double wording and proper links to files
in github was missing, which did not look good in the rendered HTML
page.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_IEEE802154_CC2520_AUTO_ACK seems to creep back in, but has long
since be removed. We remove old references a few times.
Commit 2facf33f28 - "net: ieee802154: Remove old cc2520 AUTO_ACK
assignments".
Remove them again.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds more error checking and handling for socket APIs.
Fixes: #13885
Coverity-CID: 190928
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
CONFIG_NET_DHCPV6 doesn't exist so remove references to it in the
sample, leave comments about TODO if/when this might exist.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_DCD_DSR does not exist so the code block associated with it would
never be built, so remove it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We need to set CONFIG_HW_STACK_PROTECTION=y, instead of the
internal symbol CONFIG_MPU_STACK_GUARD, in order for fatal.c
to be able to parse the error code. MPU_STACK_GUARD is,
anyway selected if HW_STACK_PROTECTION is set.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This example combines 2 HID classes and 2 CDC ACM classes to create
a composite, multi-instance device.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Most of the basic tests trigger LEDs or expect button press and would
hang in device testing because we can't parse success or failure from
the console. Define harness for this with the intent to skip those in
sanitycheck device testing and until we have a better way to test those.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some boards' configuration does not enable GPIO by default,
like nrf52_pca10056, it causes ASSERTION FAIL when running
this application. This fix is to enable GPIO by default for
the basic threads sample, like basic blinky sample does.
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
We are doing math of two 32-bit numbers and assigning into a 64-bit
result. Add explicit cast of one of the values being multipled to get
explicit promotion.
Fixes: #13883
Coverity CID: 190930
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The return from ipm_set_enabled wasn't assigned to 'status' so the check
right after the call to ipm_set_enabled() wasn't doing the right thing.
Fixes: #13881
Coverity CID: 190932
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Port all users of 'set_conf_file' to use the built-in rules
instead. This follows the convention-over-configuration principle to
make the system as a whole simpler and more consistent.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
(Chunk 1 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If bind() fails or TX thread cannot start, then cleanup the
socket by calling close()
Coverity-CID: 191003
Fixes#13824
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
commit ddf744deee ("drivers: pwm_nrfx: Use Device Tree label as
instance name") removed the config setting for PWM names and replaced
it with DT_NORDIC_NRF_PWM_PWM_*_LABEL.
This change is causing the blink_led and fade_led samples to break
when compiled for nRF52 boards.
Let's update the samples to use the DT setting.
Signed-off-by: Michael Scott <mike@foundries.io>
We have a great number of samples now, using different port numbers,
etc. Let them be self-documenting and print out port number used.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added support for remote wakeup in hid_mouse example.
If rempote wakeup support is enabled, wakeup request
is performed on every button click when the bus in suspended state.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
The intent of this Kconfig is to allow libc stdout
functions like printf() to send their output to the
active console driver instead of discarding it.
This somehow evolved into preferring to use
printf() instead of printk() for all test case output
if enabled. Libc printf() implementation for both
minimal libc and newlib use considerably more stack
space than printk(), with nothing gained by using
them.
Remove all instances where we are conditionally
sending test case output based on this config, enable
it by default, and adjust a few tests that disabled
this because they were blowing stack.
printk() and vprintk() now work as expected for
unit_testing targets, they are just wrappers for
host printf().
Fixes: #13701
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CPU_LPS_n name used to indicate a low power state is cryptic and
incorrect. The low power states act on the whole SoC and not exclusively
on the CPU. This patch renames CPU_LPS_n states to LOW_POWER_n. Also
HAS_ pattern for Kconfig options is used in favor of a non standard
_SUPPORTED. Naming of deep sleep states was adjusted accordingly.
Following is a detailed list of string replacements used:
s/SYS_POWER_STATE_CPU_LPS_(\d)_SUPPORTED/HAS_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_CPU_LPS_(\d)/SYS_POWER_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_DEEP_SLEEP_(\d)_SUPPORTED/HAS_STATE_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit removes dependency on SYS_POWER_LOW_POWER_STATES_SUPPORTED,
SYS_POWER_DEEP_SLEEP_STATES_SUPPORTED Kconfig options. Power management
SYS_POWER_LOW_POWER_STATES, SYS_POWER_DEEP_SLEEP_STATES options depend
now directly on specific power states supported by the given SoC. This
simplifies maintenance of SoC Kconfig files.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Follow the pattern we have for other peripherals in that if the driver
class (CAN) is enabled than enable the driver for that class
(CAN_STM32). Also have the STM32 CAN driver depend on being on a STM32
SoC.
Remove setting of CONFIG_CAN_STM32 in any .conf files as it will get set
of CONFIG_CAN is set/enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add missing CONFIG_GPIO required by the nRF52 board-specific Bluetooth
Mesh On/Off application sample.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This is an integral part of userspace and cannot be used
on its own. Fold into the main userspace configuration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
System workqueue stack was not large enough to handle DTLS handshake,
which lead to system crash.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to follow the naming from Linux, change the name of
can_msg to zcan_frame, and can_msg_filter to zcan_filter.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add new "struct can_frame" which is compatible with Linux so that it
is easier to port socket-can applications from Linux.
Rename existing can_filter to can_msg_filter so that the name will
not conflict with Linux compatible can_filter struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch removes the free space calculation from nvs initialization.
The available space can be calculated if required using the routine
nvs_calc_free_space.
This patch also removes the locked state of nvs, it is not possible to
get in a locked state.
This patch adds an extra check on the sector_size configuration and only
allows operation on nvs when nvs has been initialized.
This patch also solves issue #13369, the usage of FLASH_ERASE_BLOCK_SIZE
has been replaced with the flash page api.
Changes:
Removed locked state and free_space from the nvs structure.
nvs_reinit(): has been replaced with by an internal only function
_nvs_startup().
nvs_write(): removed the possibility to place the file system in a
locked state, if to many gc operations are required it will return
-ENOSPC.
ssize_t nvs_calc_free_space(): introduced, calculates the free space
that is available in the nvs file system.
Removed define LOG_LEVEL.
Rebased to current master.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Remove most unnecessary instances of `export` and `cmake` use that can
instead be replaced with `zephyr-app-commands` or similar. This is to
avoid documentation using different mechanisms to describe the same
actions and in preparation for documenting `west build` everywhere.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Reverted unwanted documentation change on usb dfu sample.
Changes was introduce accidentally within PR #13475
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add more information about DNS resolver to documentation. Move
generic DNS information from the sample application into DNS
resolver documentation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove DCACHE_WRITEBACK Kconfig variable from DMIC sample app project
Cache configuration is fixed and the cache operation routines
internally take appropriate action based on the cache configuration.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Added more detailed information how to connect Zephyr instance
to host system like Linux desktop.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Macros are replaced by C++ friendly versions:
- SHELL_CREATE_STATIC_SUBCMD_SET by SHELL_STATIC_SUBCMD_SET_CREATE
- SHELL_CREATE_DYNAMIC_CMD by SHELL_DYNAMIC_CMD_CREATE
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds better description to the Kconfig options
configuring residency-based power policy.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Some of power states used numerical suffix while otthers not.
This commit adds proper suffix to all power state names.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
f
This commit simplifies OS <-> Application interface controlling power
management. In the previous approach application-based PM required
overriding sys_suspend() and sys_resume() functions. As these functions
actually implemented power state change, in such case application
basically had to provide own implementation of all PM-related stuff,
which was not portable and hard to maintain.
This commit changes this scheme: The sys_suspend() and sys_resume()
are now system functions while the application could either use
built-in power management policies or provide its own. All details
of power mode switching are now handled by the OS.
Also, this commit cleans up the Kconfig options related to system-level
power management grouping them under common CONFIG_SYS_PM_ prefix.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Documentation for a sample application to demonstrate audio
capture and playback on an Intel S1000 CRB connected to a
host over I2S.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Sample application to demonstrate 2-way audio capture/playback from a
host connected over I2S to S1000
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
This function conflicts with a function of the same name in mcuboot.
This happens when building USB DFU support into mcuboot.
DFU over USB uses image manager and mcuboot internals to manage images
downloaded to the device.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the state machine states to determine if the session has ended.
This way zperf will properly reply stat packet to remote client even if
duration of the session is non zero.
Also we don't need to update counter (received packet number) at end of
the session.
Note: if id < 0, it means session end, otherwise it's session ongoing.
(id is the first feild of application data from remote client).
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
The net-app based echo-server/client applications were used for
various smoke testing purposes. As those two apps are now removed
we need to introduce the same support into sockets based echo-client
and echo-server applications.
Fixes#13300#13481
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Updated I2S sample app for Intel S1000 CRB to loopback
the audio from host in addition to playing audio out to codec
When AUDIO_PLAY_FROM_HOST=Y, audio from host is both looped back
and played out to codec
When AUDIO_PLAY_FROM_HOST=N, audio from host is looped back and
app generated ones are played out to codec.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Update the filters that are extracting info from DT to use a define that
has a DT_ prefix so its clear that its coming from DT_. Also this lets
us remove any non-DT prefixed defines in the conf db.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It could happen that bluetooth samples fail because of stored LTK
on device used to test the sample (eg smartphone).
Add a note in bluetooth sample doc to inform users of this trick.
Fixes#13034
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Added a sample app to play audio over I2S through an onboard
Audio DAC on an Intel S1000 CRB.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
In order to enable build of stm32f7 flash driver in sanitytests,
add nucleo_f746zg to flash_shell platform whitelist.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If nvs sample is run once until max reboot value, the next time it is is
ran on the same board, it will not behave as expected as code will
read reboot counter set to max value and will stop there.
In order to avoid the operation to wipe the flash manually between
2 runs of the test, add a clean termination to the test by resetting
the reboot counter before exiting.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On my build host (where apparently the Python has a different version
of yaml than CI) this test is producing schema faiulres from the YAML:
E: samples/drivers/counter/alarm/sample.yaml: can't load (skipping):
<SchemaError: error code 2: Schema validation failed:
- Value 'None' is not of type 'str'.
Path: '/tests/test/harness_config/regex/1'.: Path: '/'>
The bug seems to be that the regex must be a list of strings, and the
empty list element is being parsed as a python None. Just remove,
presumably the intent was an empty string, which is a noop in a regex
anyway.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit changes the names of SYS_POWER_DEEP_SLEEP* Kconfig
options in order to match SYS_POWER_LOW_POWER_STATE* naming
scheme.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SYS_POWER_LOW_POWER_STATE_SUPPORTED and SYS_POWER_LOW_POWER_STATE
suggests one low power state but these options control multiple
low power state. This commit uses plural in the names to indicate
that.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit extends the power_mgr sample in order to demonstrate
power state forcing using the sys_pm_force_power_state() API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Use DT_FLASH_ERASE_BLOCK_SIZE prefixed defined instead of
FLASH_ERASE_BLOCK_SIZE as the non-DT version is deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The code has been using non DT_ prefixed defines for DT generated
defines. Switch to use DT_ prefixed ones as we want to deprecated
the non DT_ prefixed defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This application provides a full stack implementation for
communicating with the Google IOT Cloud. It leverages the
a JWT library to create JSON tokens which are then signed using
a RSA or ECDSA private key. The signed token is used to
authenticate with the Google IOT cloud servers. Once that is
accomplished, the application can subscribe, or publish data at
will.
Included in the application is a python script that can be used to
create RSA/ECDSA certificates and keys. The user will load the
certificate for the appropriate device on the Google IOT Cloud. The
private key is created by the script and stored in a C structure format
that is then consumed by the application. It is important to note that
any keys generated from the scripts SHOULD NOT BE STORED publicly.
Please refer to the README for more information.
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Shell will store only pointer to the prompt string instead of
copying it to the RAM buffer. It will save RAM memory and
it will simplify implementation of a new feature: "select"
command. When a command will be selected than shell will
display command syntax as a prompt.
Removed obsolete ASSERT check in a static function.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This is hitting a stack overflow (probably the same reason xtensa is
also excluded -- both are stack-hungry platforms), but with CMSIS
there is a fixed cap of 512 bytes that can't be extended. So
whitelist this sample.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add sample creating 2 serial USB ports and establishing communication
between those 2 ports.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If appropriate configuration is enabled, assume (with the default
configuration) that the proxy server uses the same address as the broker
and the default 1080 port.
The default settings can be changed in the configuration header.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_APPLICATION_MEMORY was a stopgap feature that is
being removed from the kernel. Convert tests and samples
to use the application shared memory feature instead,
in most cases using the domain set up by ztest.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
IPv4 is not needed for packet socket sample. Previous commit
helps to remove dependencies.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Use the new i2c_write_read() wrapper to simplify the code.
Also add several overlays used to test the sensor on a variety of
boards, and conf file support for trigger testing.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Adds board configurations to support the mimxrt1050_evk and
mimxrt1060_evk boards in the lvgl sample.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes the lvgl sample to use the same display device name as the lvgl
library rather than a hardcoded string.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
With this commit, it is now possible that if (for e.g.) lightness
transition is interrupted by temperature transition (which could
be instantaneous or non-instanstaneous) then as soon as temperature
transition get over, then algorithm would achieve target value
of lightness.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Add a sample demonstrating usage of the APA102 driver, heavily based
on led_ws2812. Tested on nucleo_l432kc with an Adafruit DotStar strip.
Signed-off-by: Marc Pignat <marc@absintheaudio.com>
There is a apa102 driver, and an upcomming patch will provide a sample
for using it, but let's keep the bitbang version which is intersting.
Signed-off-by: Marc Pignat <marc@absintheaudio.com>
Sample application which opens a packet socket and receives
every packet on the wire and send some dummy packet over
socket. Simple demo of how to use packet sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Added sample to show disk access and FS api with
Fat filesystem and SDHC driver. Tested working with
nrf52840 (blip).
Signed-off-by: Tavish Naruka <docuser@docs.electronut.in>
This commit enhances the power_mgr sample by adding code
presenting power state locking API as well as its effect
on the decisions made by the Power Management Policy.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Indicate that PWM is supported on several Nordic DK boards so that
the pwm_nrf5_sw and pwm_nrfx drivers are covered by CI builds.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable HW PWM driver instead of the SW one on nRF SoCs where the PWM
peripheral is present.
Default PWM instances are also enabled on Nordic DK boards so that it
is possible to build the basic fade_led sample for them without extra
adjustments.
After the above changes are applied, some configuration alterations
in basic samples blink_led and fade_led become no longer needed.
These are removed. And the blink_led sample is corrected so that it
works with the nRF HW PWM driver as well.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
To avoid confusion, callbacks using ordinal pin numbers
is going to be reverted. So the driver has to be re-worked
to expose multiple devices so each device has 32 pins.
Also fixes#12765
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add section for build sanity check configuration with
CONFIG_USB_COMPOSITE_DEVICE enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add configuration for creating composite USB device with CDC ACM and
Mass Storage functions.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
New shell does not need either CONFIG_UART_CONSOLE
or interrupts support to be working. Only CONFIG_SERIAL
in combination with CONFIG_UART_SHELL_ON_DEV_NAME are required.
Updated sample yaml file accordingly.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit fixes the following issues introduced when switching to
the new SPI API in commit e7de85b534:
- the SPI slave operating mode (and support for it) was not properly
selected (the setting was missing in the sample probably because
the old nRF SPI slave driver used in this sample was not checking
the requested mode at all)
- the `txmsg` buffer filled with 0xFF values in the `bt_tx_thread`
function was improperly used afterwards in `spi_send` to transmit
the slave header frame
- the common structures defining buffers for SPI transactions (`tx`
and `rx`) were modified in `spi_send` before the corresponding
semaphore was taken, resulting in data corruption
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert the hci_spi sample to get the SPI and GPIO settings from Device
Tree instead of Kconfig.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The sample was defining a #define with a CONFIG_ prefix but this wasn't
coming from Kconfig. Change the define name not to conflict with the
Kconfig CONFIG_ namespace.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As we want to remove dts dependency on Kconfig, we had a case based on
CONFIG_BOOTLOADER_MCUBOOT. From a DTS point of view that was just
getting the chosen property 'zephyr,code-partition' set. We can easily
move this to the actual dts files and remove the mcuboot.overlay.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
gpio_port_* functions are being deprecated. Convert boards/altera_max10
sample to use gpio_pin_* functions instead.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use auto-generated device tree macros in LPS25HB driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DS0 driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
As example of echo_async_select added recently shows, we no longer
need to define a logger unconditionally in each source file. These
samples are intended to show Zephyr compatibility with POSIX sockets
API, so the less there're differences between Zephyr vs POSIX
ifdefs, the better.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The LwM2M library has moved from the network application library
APIs to BSD socket APIs. Let's make the needed changes in the
LwM2M sample to follow those changes.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that the security data can be loaded into and used from the
security / server objects, we can add support for LwM2M bootstrap.
This is a mode where initially a connection can be made to a server
which can update several LwM2M (including security and server
data) and then trigger a "bootstrap complete". Once this happens
the client will start it's connection process over but now with
the new information.
Signed-off-by: Michael Scott <mike@foundries.io>
In order to support bootstrap mode, we need to store server data
in the security / server objects. Once the connection to the
bootstrap server is made, it will clear these objects and add
new server connection data.
Signed-off-by: Michael Scott <mike@foundries.io>
As part of the migration from net_app APIs to socket APIs, let's
stop referencing the net_pkt fragments throughout the LwM2M library.
Establish a msg_data flat buffer inside lwm2m_message and use that
instead.
NOTE: As a part of this change we remove the COAP_NET_PKT setting.
The COAP library reverts to COAP_SOCK behavior.
This doesn't mean we use sockets in LwM2M (yet), it only means we
use the socket-compatible COAP library which parses flat buffers
instead of net_pkt fragments.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, this will select the needed configs for LwM2M and net_pkt.
During the migration to socket APIs, the net_pkt selections will change
to socket-based selects.
Signed-off-by: Michael Scott <mike@foundries.io>
As the net-app based echo samples are being removed, there's no use
referencing them any longer in their socket counterparts.
Additionally, overlay configuration descriptions were added in the
same manner original samples did.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The removed test does the same thing and runs on the same platforms
as already existing samples/boards/nrf52/power_mgr.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit updates the README and sample.yaml in order to signal
that this demo works flawlessly on the nRF51 platform.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit updates the power management sample in order to use
new features introduced by recent changes in the Zehyr Power
Management subsystem. Now, it shows how to use power management
policies as well as how to implement custom power modes.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Since the lp3943 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the pca9633 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the lp5562 led driver still supports both DTS and non-DTS
configuration, we update the code to use DT_<COMPAT>_<INSTANCE>
defines for the CONFIG_HAS_DTS_I2C case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds support in the sample to deal with the case when TLS
is offloaded and mbedtls is not necessary.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This commit adds the necessary changes to allow the mqtt_publisher
sample to run on cc3220sf_launchxl.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The original SNTP client library was designed for the net-app API, for
which it makes sense to have a callback function, which is called
asynchronously when an answer is received.
For the socket based interface, the callback is called just before
sntp_request() returns. It gets the status and the epoch_time in
parameter, however the status is already returned by sntp_request(). It
therefore make sense to replace the callback function by a pointer to
epoch_time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There are no longer per-partition initialization functions.
Instead, we iterate over all of them at boot to set up the
derived k_mem_partitions properly.
Some ARC-specific hacks that should never have been applied
have been removed from the userspace test.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Don't include net_app.h and net_buf.h, the first is deprecated, the
latter is low-level header, both shouldn't be used for socket apps.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fixes the adt7420 sensor sample to fail gracefully if the sensor device
is not found and asserts are not enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The public APIs for application shared memory are now
properly documented and conform to zephyr naming
conventions.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The v2018.10 release of OpenAMP reworks the API set and splits the
remoteproc vs rpmsg interfaces so one can use rpmsg without remoteproc.
This helps drastically reduce the code footprint utilized by OpenAMP.
The remote see around 4k reduction in code size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If Client send transition time values as 0x40 or 0x80 or 0xC0 then
this was cause the behind divide by zero exception during calculation
of transition->counter. This PR will solve this bug.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Removed foreground command functionality from shell source files.
Removed associated example.
Removed enter/exit command functions from the Bluetooth example
Updated project config files.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The WNC-M14A2A modem is supposed to use HW flow control on the UART
connected to the MCU. In the past, we were able to bypass this
requirement by using only the LTE-M firmware which supported pulling
the CTS line high via "send-ok" gpio.
This does NOT work for the LTE firmware.
Now that MCUX UART driver supports hw-flow-control setting, let's use
it in the modem overlay so that regardless of modem firmware
(LTE vs. LTE-M) the sample will "just work".
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
Convert ssd1306 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-i2c" from compatible.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert ssd1673 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-spi" from compatible.
Fix up references in reel_board dts and sample.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The app shared memory macros for declaring domains provide
no value, despite the stated intentions.
Just declare memory domains using the standard APIs for it.
To support this, symbols declared for app shared memory
partitions now are struct k_mem_partition, which can be
passed to the k_mem_domain APIs as normal, instead of the
app_region structs which are of no interest to the end
user.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert the lpd880x driver to use device tree and new DT_<COMPAT>
defines. Support both LPD8803 & LPD8806 device tree compats.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
SNTP client sample requests time sync on IPv4 and IPv6 addresses
using socket based SNTP client library.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As networking libraries and protocols are moving to socket
based implementation, reworked SNTP client library to use sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We have now two code samples available for ArgonKey board:
1. sensors sample, fetching data from accel/gyro/mag,
barometer, humidity and proximity sensors
2. microphone sample, acquiring 5s audio @16KHz from the
on-board microphone.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS3MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DSL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The app is already sending period heart beat messages, and since it is
not designed to be used for such long times that would require IVI
Update, keep the secure network beacon sending disabled.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Suspend the mesh network after 30 minutes of inactivity. This should
help prolong the battery life of boards used at multi-day events, if
the user forgets to power off the device for the night.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Docs in the samples folder are a mixture of samples and sample indexes
of more samples, cluttering the index display. This change eliminates
the clutter, be we should reorganize the sample docs so we have a
consistent doc hierarchy (and improved organization).
Fixes: #12758
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add a project configuration for nrf52840_pca10090 that will
route the nRF9160 interface pins to the nRF52840, and use them
for HCI over UART.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This sample is made to demonstrate use of x-nucleo-ik01a2 shield.
It requires a board with Arduino i2c where it can be plugged on.
The sample has been tested on Nucleo F401RE board.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Share lis2dh driver among few accelerometer sensors that has
same register interface: LIS2DH, LIS3DH, LSM303DLHC, LIS2DH12,
LSM303AGR.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Supported PWM at pins A0, D3, D5 and D6 which are also Arduino
compatible. Also the onboard red LED can be used with PWM.
The basic/{fade_led, blink_led} samples to apply to this board
seemlessly and operate on the onboard red LED.
Also supported RTC.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
This commit provides sample application for sensor lsm6dsl.
This sample has been tested on both 96b_argonkey board,
where lsm6dsl is connect to the micro thru SPI bus, and on
disco_l475_iot1 board, where instead it is connected to I2C bus.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
mbedTLS benchmark used 32-bit arithmetics for time calculations
(nanosecond resolution), which could overflow on slower platforms
on more time-consuming benchmark tests. In result, the benchmark
could give incorrect timing information. Using 64-bit arithmetics
prevents this issue.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add overlays for commonly used socket samples: big_http_download and
dumb_http_server. Can be used with:
make BOARD=mps2_an385 CONF_FILE="prj.conf overlay-smsc911x.conf"
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Split out the boards that utilize the FRDM-KW41Z as a seperate test
where we explicitly set the shield as an extra_args instead of having to
do it in the CMakeLists.txt file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rather than specifying SHIELD via Kconfig, we move it to being
specified via the command line, similar to board.
So we can do:
-DSHIELD=x_nucleo_iks01a1
or, for multiple shields:
-DSHIELD="x_nucleo_iks01a1 frdm_kw41z"
Following cmake change, update x_nucleo_iks01a1 sample in order
not to enable CONFIG option anymore but set SHIELD cmake option.
Last, update documentation to reflect this change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a configuration structure to sht3xd that holds instance-specific
parameters, implemented in a immutable statically allocated object
initialized with material from device tree binding aliases.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
We have a new power management system and those samples have been
written for specific boards and using the application based power
management subsystem. We are getting new tests/samples that are generic
with the new subsystem, so remove those in favor of the new ones.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample is linking the 'app' with 'subsys__bluetooth', which will
add zephyr/subsys/bluetooth to the include path of the app. But this
is unnecessary as the app already has this path on it's include path.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Legacy shell removed in order to avoid maintaining two shells
systems.
All examples and tests have been migrated to the new shell.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Convert lsm303dlhc_accel & lsm303dlhc_magn sensor driver to use new
defines so we can remove the dts_fixup.h code for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Driver for networking device Microchip ENC28J60 is used as SPI slave,
moved to DTS type definition. Samples echo_client and echo_server use
this device on Arduino 101 board.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update boards yaml file with arduino_i2c supported option
We exclude disco_l475_iot1 from the x_nucleo_iks01a1 sample since there
are duplicated sensors between the disco_l475_iot1 and shield. Until
Zephyr drivers can handle multiple sensors we need to have this exclude.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This board has headers for these buses so they should be made available
without requiring special overlays.
Also take advantage of the new Nordic auto-enable for peripherals,
which eliminates the need for special configuration.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
If Server receives re-transmitted message then it will not
transmit corresponding publish message for it.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added app_gpio.c & no_transition_work_handler.c to reduce
burden on main.c. It will simplify & help to understand
overall architecture.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Simplified algorithm behind states binding & target values calculation.
This has improved code readability.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Disabled the CONFIG_COVERAGE for benchmarks and other tests.
This is needed because it interferes with normal behavior of the
test case.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previously there was just "min_ram: 32", which took care about
suitable flash size implicitly. But now we have interesting boards
(e.g. lpcxpresso54114_m0) which tout RAM of 32K and Flash of 64K.
So, become more explicit about Flash requirement for the sample.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
These two tests are hitting a stack overflow on x86_64 (not entirely
surprisingly), but can't just increase stack size because there is an
assert in the CMSIS compatibility layer that stacks be under 512
bytes. Just disable for now.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This builds with a host compiler, not one from the SDK, and so no
newlib library is available. There is work to enable newlib detection
at and above the cmake level. This patch can be reverted when that
lands.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
No MPU support there yet. This test should really be predicated on a
kconfig variable, not architecture.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add Accelerometer mouse by using fxos8700 accelerometer and using data
to control USB HID mouse.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When used suitable config overlay, qemu_cortex_m3 with Ethernet
support can be started with just usual "make run".
An example of such overlay is included with samples/net/echo_server,
can be built and run with:
make BOARD=qemu_cortex_m3 \
CONF_FILE="prj.conf overlay-qemu_cortex_m3_eth.conf" run
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added macro that generates simple report descriptor for mouse.
This improves the readability of hid-mouse sample.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
These were still running through Ethernet using generic
overlay-802154.conf thus creating a dedicated one.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Set BOARD variable in CMakeLists.txt for DMIC Sample App
Since this sample app is for intel_s1000_crb, setting BOARD
in CMakeLists.txt will eliminate the need to specify in
cmake command line every time during build.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Check should be done with & instead of | otherwise it will always be
evaluated as 1/true regardless of the flags.
Fixes#12308
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The current OpenThread integration wants to download (from github) and
configure the OpenThread source tree every time the app is build. We
don't want to be doing this in quadruplicate every time sanitycheck is
run.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These tests were defining a "test_kw41z" case, but that platform is
already whitelisted in the main ("test") case, and this one defines no
different behavior. It's just a dupe.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
nucleo_l476rg uses I2C_3 rather than I2C_0, and uses special magic to
synthesize a corresponding define from a device tree node label. Update
the sample to use the Arduino binding if that's present.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The Nordic TWIM driver uses DMA which requires that the source address
be located in RAM. If it isn't the transfer will rejected as invalid.
Provide a RAM address even though it's never dereferenced.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
0x77 is an available device address (and is the secondary address for
the BME280). 0x78 is a reserved address.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Exteneded shell sample with example how to use shell_fprintf from
any context with 'foreground' command.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The test 'samples/application_development/code_relocation' was failing
in master because it was not declaring that it was defining additional
sections.
The CI error is attached below.
This patch fixes the CI failure by declaring in 'sample.yaml' that
these additional sections are expected.
FAILED:
qemu_cortex_m3/samples/application_development/code_relocation/test
has unrecognized binary sections: ['_SRAM2_RODATA_SECTION_NAME',
'_SRAM_TEXT_SECTION_NAME', '_SRAM_RODATA_SECTION_NAME',
'_SRAM_DATA_SECTION_NAME', '_CUSTOM_SECTION_NAME2']
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix misspellings in documentation (.rst, Kconfig help text, and .h
doxygen API comments), missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
blinky/button and disco samples are now using definitions
generated from boards dts files.
Update samples README files accordingly.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The options selecting nRF drivers are now enabled by default when
an nRF SoC is selected as the build target.
The options selecting given hardware instances are now enabled at
the board level.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The sample application to demonstrate dining philosopher's problem
implementation using CMSIS RTOS V2 APIs with semaphores and mutexes
as resources (forks).
The application makes use of CMSIS_RTOS_V2 APIs on threads, semaphores
and mutexes.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Increase rx stack size for OpenThread overlay, as updated revision of
OpenThread requires more stack to operate.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After this fix each LED will blink 5 times. Previously
LED_0 has been blining 6 times while others 5 times.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Update zephyr integration of openthread to latest api as of 2018-12-17:
2a75d30684
Both echo_server and echo_client compile and are operational.
Signed-off-by: Martin Turon <mturon@google.com>
This application benchmarks the various cryptographic primitives
offered by mbed TLS.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
It is safe to assume that if X_GPIO_CONTROLLER is defined (hence
generated) X_GPIO_PIN should also be defined.
If this is not the case, this is an issue and letting the sample
build will reveal the issue.
Update the yaml filter to rely only on _GPIO_CONTROLLER #define's
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In disco basic sample, same GPIO controller was used for LED0
and LED1, which is actually a particular case.
This change implements the general case, where LED0 an LED1 might
not have the same gpio controller.
Tested on nucleo_f429zi and frdm_k64f.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In gpio driver sample, same GPIO controller was used for out pin
(LED0) and in pin (SW0), which is actually a particular case.
This change implements the general case, where button an led might
not have the same gpio controller.
Tested on nucleo_f429zi and frdm_k64f.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Removed get_report_cb as it was an incorrect implementation
of Get_Report request. Correct response would be returning
current report value, not report descriptor.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Currently there is a mixed approach in prefixes from mbedTLS
configuration (MBEDTLS_ and TLS_). The latter was used in generic config
file and could bring up confusion that it can only be used with TLS
subsystem. Hence unify the approach to MBEDTLS_ prefix to avoid such
confusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
STM32 uart Kconfig instance flags were not following
same naming scheme than other drivers (i2c, spi, ..)
Update driver to use UART_X instead of UART_STM32_PORT_X
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Added right button, X and Y axis movement to HID mouse example.
Enabled only if board has enough buttons.
Added LED toggling notification when report is sent.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Check result of fcntl() to catch any regressions in fcntl() handling
in Zephyr. To facilitate this, also merge block() and nonblock()
functions into single setblocking().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Current application data size in echo_client sample does not fit into a
single datagram with DTLS enbled for default IPv6 MTU (1280 bytes). This
caused abrupt failure of the sample with DTLS enabled over 802.15.4 L2.
Decreasing the application data size allows it to fit into a single UDP
datagram after encapsulating it into DTLS record.
Additionally, finetune DTLS timeout on echo_server to match UDP
application timeout on echo_client (so that a single datagram loss
does not cauase DTLS session to end).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Now if Server receives re-transmitted messages from client then
it will not get completely ignored but respective GET & Publish
message will get release from Server side.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
As per Mesh Model Specification,
when a Server receives a Set message or a Set Unacknowledged message,
it shall set the state to the target field of the message,
unless the message has the same values for the SRC, DST, and TID
fields as the previous message received within the last 6 seconds.
This commit take care of this requirement.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
POSIX doesn't mandate such a header, only <fcntl.h>. <sys/fnctl.h>
is just an internal implementation detail of Newlib on which we should
not rely.
This makes it possible to build this sample against minimal libc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Considering that IP can be set dynamically by DHCP
or statically before test previously, we could have
alternative way by supporting both setting IP and
existing IP.
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
Since the Arduino 101 and the Quark SE C1000 are not actively developed
boards, default to other boards that are maintained and used.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit's implementation update Vendor Model dummy response
value in vnd_get() instead of vnd_set_unack().
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Removed bug which get introduced by PR:9521. Because of it
not able to save App's variable on SoC flash.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
The OpenAVNU gPTP daemon repository has changed so the compile
instructions were not working.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not limit to whitelisted boards, instead make it build/run for any
board that defines required DTS macros.
Simplified documentation and made it more generic. Remove HW setup and
made sample work with built-in LEDs and buttons.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not limit to whitelisted boards, instead make it build/run for any
board that defines required DTS macros.
Remove QMSI kconfigs and depend on DTS only.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not limit to whitelisted boards, instead make it build/run for any
board that defines required DTS macros.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not limit to whitelisted boards, instead make it build/run for any
board that defines required DTS macros.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
1. Modified fade_led PWM example to include
nRF HW PWM option.
2. Added fade_led nrf52_pca10040.overlay
in order to enable PWM node and choose
output PWM GPIO for channel 0. Channel 1
GPIO enable but not used in sample src.
Signed-off-by: Gaute Gamnes <gaute.gamnes@nordicsemi.no>
The Code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Remove QEMU instructions as those do not work. Add native_posix
board instructions for running gPTP with linuxptp daemon.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This sample was creating objects from header file in the bss.
Fixed it by moving the objects to appropriate object files.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This sample provides an example for using the code relocation
feature. This example will place text,data,bss from 3 files to
various parts in the SRAM. For this a custom linker file is used
which is derived from include/arch/arm/cortex_m/scripts/linker.ld.
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
We get an intermittent fail when running on qemu_xtensa. Disable this
sample for now on that platform to allow sanitycheck / CI to pass for
other PRs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removed Console dependencies from shell uart backend.
Generated define: CONFIG_UART_SHELL_ON_DEV_NAME for each board.
Fixes#10191
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Use generic logging macros LOG_*() instead of NET_*() as the
latter are mostly meant for internal networking stack use.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add Bluetooth, 802.15.4 and OpenThread overlay configurations to socket
echo_client and echo_server samples.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Sample application to demonstrate usage of cmsis_rtos_v1 APIs
with dining philosopher's problem implementation.
This covers semaphores, mutex and thread APIs of CMSIS RTOS V1.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Corrected state binding. With this commit Light Lightness
actual state would not cross its upper & lower limit.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Function names should have a verb as the last component.
As per this standard, rename some fuunctions names.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Due to recent changes some bugs had introduced in Gen. Level Move
GET & Publish functionalities. Now separatly introduced
gen_level_move_get() and gen_level_move_publisher() to resolved it.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As it stands now, the console effectively works in raw mode, so all
messages should end with "\r\n". This was missed previously, because
the sample was run in QEMU, on top of POSIX cooked console. Running
on real hardware showed this issue.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Idle rate functionality has been implemented for HID USB class.
Bassed on Device Class Definition for Human Interface Devices 1.11.
Tested with USB3CV and host with idle rate.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
HID class now defaults to universal request callbacks in case they
are not provided by the application. This applies to following,
class-specific requests: Get_Report, Set_Report, Get_Idle, Set_Idle,
Get_Protocol and Set_Protocol.
Tested with USB3CV.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Rephrase some help messages to decrease flash usage.
Deactivate shell history feature for test test_netusb_rndis
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
We are not expecting forever k_sleep in multithreading.
And k_sleep is empty in non-multihreading.
So remove invalid forever sleep to avoid the below issue.
ASSERTION FAIL [duration != (-1)] @ zephyr/kernel/sched.c:807
Please refer to _impl_k_sleep api in zephyr/kernel/sched.c:807
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
Remove adhoc handling of BLE connection setup, rely on net_config for
that. Remove board-specific configs, instead have prt.conf and overlay
configs. Perform TLS setup once before main loop, to avoid errors.
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
context4/6 is initilalized in net_context_get function
which is restricted under CONFIG_NET_IPV4/IPV6 with
IS_EANBLED macro. So add the same macro check for
net_context_put function to avoid NET_ASSERT(context).
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
If NET_IPV6 is disabled, build issue happens as below.
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c: In function ‘zperf_tcp_rx_thread’:
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c:171:9: error: ‘in6_addr_my’ undeclared (first use in this function)
&in6_addr_my->sin6_addr);
^~~~~~~~~~~
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c:171:9: note: each undeclared identifier is reported only once for each function it appears in
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c: In function ‘zperf_tcp_receiver_init’:
zephyr/samples/net/zperf/src/zperf_tcp_receiver.c:250:3: error: ‘in6_addr_my’ undeclared (first use in this function)
in6_addr_my = zperf_get_sin6();
^~~~~~~~~~~
*** [CMakeFiles/app.dir/src/zperf_tcp_receiver.c.obj] error 1
*** [CMakeFiles/app.dir/all] error 2
Signed-off-by: Bub Wei <bub.wei@unisoc.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
In Gen. OnOff Unack handler, gen_onoff_publisher(model) was
misplaced previously & now it is set to proper location.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Add a sample application for demonstrating automatic generation of
Character Framebuffer (CFB) font headers at build time.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Enable debug logging in the watchdog driver sample application to aid
in debugging watchdog drivers.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
If transition time is not equal to Zero then & then only values
related to transition get calculated.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
If the first name is longer than HELLO_MAX sending would fail due to
there not being sufficient MIC space (or worse overrun the net_buf).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This code was still incorrectly causing corrupt strings to be
generated. Now it should be correct.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now if Gen. OnOff state set by client as '1' with some
transition time then value of Lightness will not jump to default
or last value instantly instead it would gradually increase during
that transition period.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Create independent function handlers for some Servers. This
would not initiate state binding if current state is equal to
Client requested state.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Inverse logic for onoff state while driving LED GPIO. For LED light on
GPIO pin is 0, 1 for LED light off.
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Update the http_get sockets sample to enable association of secure
tags with certificate filenames.
This allows certificates and keys to be provisioned to the file
system on secure flash, without having to include the actual
certificates in the application.
Validated on the cc3220sf_launchxl board.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Two separate folders and Kconfig options causing confusion on
CoAP and CoAP_SOCK implementations. This patch simplifies it.
Current CoAP Kconfig option moved to COAP_NET_PKT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
System Power Management is only supported in Tickless Idle mode.
This patch modifies Kconfig dependencies to ensure System Power
Management option selects Tickless Idle one.
Fixes: #11046
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit will take back changes made by previous commit
i.e. fad8ff39c3.
This is beacause k_sleep() based delay is not behaving as
expected while testing & take more time than expected.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
The disco_l475_iot1 has the Inventek eS-WiFi, so lets enable the sample
on the board. (This also gets us something that will build test the
eS-Wifi driver as part of sanitycheck).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds common option to disable support for LE Data Length Update
procedure in controller and host.
This will reduce flash usage by compiling out le_data_len_change
event handler that will never be called if controller has been
compiled with BT_CTLR_DATA_LENGTH option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds common option to disable support for PHY Update
procedure in controller and host.
This will reduce flash usage by compiling out le_phy_update_complete
event handler that will never be called if controller has been
compiled with BT_CTLR_PHY option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Since setting USB console port name is moved to DTS users have
problems enabling it. Notify user that the console is not set.
Fixes#10693
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adds the virtualcom device to the nrf52840 SoC dts and adds a board
specific nrf52840_overlay.dts file, copied exactly from the
arduino101_overlay.dts file, to set the console device name
appropriately for the subsys/usb/console sample project.
There were no clear alternatives to add a usb_cdc: virtualcom device to
all known SoC devices with USB support as should probably happen.
There was also no clear alternatives to add a non-board specific overlay
to the example.
This fixes a specific problem with the nrf52840-dk board for this sample
project.
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
With this commit now it is simple to understand flow of logic when
NODE receives any message & how it proceed things one by one.
Plus NODE will immediately send GET status to Client instead of
waiting for things which has less priority.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
In order to prevent failing tests on i.MX RT the following samples were
limited to a minimum 140k of flash: http_client, http_server,
socket/echo_client and sockets/echo_server.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Add IMX IPM sample application. It reads the data sent to the
Messaging Unit and sends them back. It has been tested on Udoo Neo Full
board with the Cortex-A9 core running Linux and sending the data
into the Messaging Unit A and the Cortex-M4 running this sample Zephyr
application and reading the data from Messaging Unit B and sending it
back for Linux side to read it from Messaging Unit A.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Rename existing headers and sybols to mqtt_legacy, to allow new
implementation to keep old config and header names.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The show_sensors_data() function tries to access val[2] when
outputting the Z-axis value, so the array must have at least three
elements. This also triggered Coverity CID 189741.
Fixes#11482
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This comparison was always supposed to be > rather than >=. Fixing
this also fixes Coverity CID 189740.
Fixes#11483
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Let's expand the sanity build testing for the lwm2m_client by
doing the following:
- Add variant builds for DTLS, bluetooth and modem
- Check various combinations of hardware across each of these
variant builds: frdm_k64f, nrf52_pca10040, nrf52840_pca10056,
disco_l475_iot1
Signed-off-by: Michael Scott <mike@foundries.io>
When the WNC-14A2A modem binding was originally introduced, I thought
the base_label would shorten the define keeping the result short and
easily portable. Turns out with the latest changes, it has a side
effect of removing the "DT_*" prefix which is breaking the build.
Let's remove "base_label" from the modem binding and adjust all of
the dts_fixups referring to the WNC14A2A defines.
NOTE: This commit moves the left-over WNC14A2A dts_fixup defines from
the nRF52 soc into samples/net/lwm2m_client as the new values.
They will stay there until the modem can be re-configured as a shield.
Signed-off-by: Michael Scott <mike@foundries.io>
During the modem overlay move from the K64F board directory to the
LwM2M sample code, 2 DTS entries were dropped:
current-speed = <115200>;
status = "ok";
Without these entries the DTS defines for UART2 and CURRENT_SPEED
are missing from the generated_dts_board.h file.
Signed-off-by: Michael Scott <mike@foundries.io>
All drivers require DTS for their primary SPI settings.
Removing SPI_[0-9]_NAME config option added some more samples changes.
Usage of these options there was anyway not relevant.
Fixes#11064
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We have cases with UART drivers where TX interrupt handling is not
bootstrapped properly on enabling them. To make such cases more
obvious, start this sample with console_write(), the output of which
wouldn't appear if that's the case. (Of course, the sample starts
with printk() exlaining what may happpen.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Remove the ifdef related to CONFIG_FS_FLASH_STORAGE_PARTITION. There
shouldn't be any harm in always having the partition around as we'll
just generate the defines related to and most applications will ignore
them.
Helps get one step closer to have DTS not depend on Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The wncm14a2a modem is an add-on/shield and not part of the
nrf52840_pca10056 board and should be maintained and configured
outside of the board.
This needs to be moved to a shield, see #10965.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The wncm14a2a modem is an add-on/shield and not part of the nrf52840_mdk
board and should be maintained and configured outside of the board.
This needs to be moved to a shield, see #10965.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
echo_server can use up to 6 sockets therefore it needs more file
descriptors than the maximum default value specified.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There are a small handful of samples that still utilize <board.h>
include, to minimize the use of <board.h> to these specific cases and
allow us to remove adding the board dir to the top level include search
path, we explicitly in each sample add the specific board dir it needs.
For the microbit cases these could be replaced by DTS support in the
future when the pwm_nrf5_sw supports DTS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now states which are bound have single timer that means
means for lightness variation there is one timer & for
temperature variation there is one timer.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Corrected mapping of message handler for Generic
Move Set, Generic Move Set Unack, Light CTL Set &
Light CTL Set Unack.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Removed extra blank line. Add new
bound_states_transition_type_reassignment() function in
transition.c to improve code readability & understanding.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This edition would improve by default mesh network
performance. This is after testing with nRFMesh app
from Nordic Semiconductor.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Include regex pattern matching of console output
to determine the sample execution status.
Add fixture to determine the hardware dependency
if any. If FRAM is connected to board externally,
then with fixture, automation would be able to
identify the board with sensor to trigger the
execution.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Regex pattern matching is included to match the
execution log from console to return test result
in automation.
Also add fixture to identify the external sensor
connected for automation framework to trigger test
cases on particular board which is connected with
required sensor.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
This commit would add the pull-up or pull-down on the switch pin and
makes it functional on the board where there is no external pull-up.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
We should let drivers or board code include soc.h directly so we can keep
board.h to local info for board specific code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This can help find unused symbols. Those end up without a type if
'default' is used instead of 'def_bool', which generates a warning.
Search for "Kconfig.defconfig" in
https://docs.zephyrproject.org/latest/application/kconfig-tips.html for
a longer explanation.
Keep the 'def_bool' for the following symbols, which seem to be
deliberately defined only in Kconfig.defconfig files:
- ALTERA_AVALON_I2C
- ALTERA_AVALON_MSGDMA
- ALTERA_AVALON_PIO
- ALTERA_AVALON_QSPI
- ALTERA_AVALON_SYSID
- CLOCK_CONTROL_IMX_CCM
- CPU_EM4_DMIPS
- CPU_EM4_FPUDA
- CPU_EM4_FPUS
- FP_FPU_DA
- I2C_GECKO
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Change the sample to use a different controller device name per pin. We
shouldn't assume that on a given board that all the pins we are using
will be on the same GPIO controller device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a dts binding for the Atmel WINC1500 WIFI chip. Update the
quark_se_c1000_devboard to utilize this binding as well as the wifi
sample app.
We now get all the GPIOs related to the Atmel WINC1500 from the device
tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_"
in their names, assumed to be generated by the extracting script,
are updated with the DT_ prefix, to reflect the recent changes made
to the script.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
If shell UART backend was enabled and logger uart backend was
not explicitly disabled then both were used resulting in logs
being printed twice on terminal.
Patch modifies default state of log uart backend to depend on
state of shell uart backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a shell that implements "promisc [on | off] <interface>"
command to toggle promiscuous mode support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Patch introduces sensor model to mesh badge application. Along with
model definition a sensor get message is implemented and handled on
server.
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
This patch introduces new screen to mesh_badge application. Sensor
screen shows measurements from board sensors updated every 2 seconds.
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Convert the BMI160 to use Device Tree to get SPI and GPIO params instead
of Kconfig. Updated samples, tests, and arduino_101_sss board support
for this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Changed LOG_MODULE_REGISTER and LOG_MODULE_DECLARE macros to take log
level as optional parameter. LOG_MODULE_DECLARE can now also be used
in static inline functions in headers. Added LOG_LEVEL_SET macro
which is used when instance logging API is used to indicate maximal
log level compiled into the file.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The overlay-e1000.conf can be used for example with Qemu
which has support for e1000 ethernet driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change the label GPIO_KEYS_BUTTON_0_GPIO_CONTROLLER that is generated
for the DT node directly to the corresponding one generated through
the "sw0" alias (i.e. SW0_GPIO_CONTROLLER) to make it consistent with
other DT related labels used in this code (SW0_* and LED?_*).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Now that we set LED info in the device tree for all boards we don't need
to special case handle in the name/led pin (it comes from DT). We can
also remove include board.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This required wiring external daughter board by hand, it's not provided
by the board directly, let's remove this.
Applying the change on relevant samples.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is an mcr20a shield board for frdm_k64f which is easier to use
than wiring a cc2520 by hand. So let's remove this.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The only difference between the F413xH and F413xG is flash memory size.
STMF413xH: 1536 Kbytes
STMF413xG: 1024 Kbytes
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
`shell_cmd_precheck()` function has the second argument as boolean
and currently we pass assignment expression instead of boolean
expression. Therefore, fix the expression by passing `argc == 2`
as the boolean argument.
Fixes#11099
Coverity-CID: 189507
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
This commit moves the BLE GATT Device Information service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and adds
a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Issue found using Coccinelle. Semaphore is not required at all
in this application.
Fixes#11150
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Improved RX path to use ring buffer for incoming data instead of single
byte buffer. Improved TX path to use ring buffer. Added support for
asynchronous UART API (interrupts).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The way the code is structured the buffer is always guaranteed to be
large enough, however perform explicit termination anyway to avoid
Coverity warnings.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tweak ROM usage of quark_se_c1000_devboard so that test_usbnet
test will pass. The board just disables network statistics as
that is not really needed here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We update 'blink_led', 'fade_led' and 'rgb_led' to support dt generated
defines for the PWM info needed for each. Since hexiwear_k64 supports
generating the info, moved the support for hexiwear_k64 to just use the
dt generated defines.
For 'blink_led' and 'fade_led' we use an alias in dt called 'pwm-led0'.
For 'rgb_led' we use aliases 'red-pwm-led', 'green-pwm-led' and
'blue-pwm-led'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The wncm14a2a modem is an add-on/shield and not part of the frdm_k64f
board and should be maintained and configured outside of the board.
This needs to be moved to a shield, see #10965.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The task_profiler is not needed nor used by zperf so remove
it from CMakefile.
Fixes#11051
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The DTS changes introduced in 7ae220c845
changes the naming of GPIO related macros. This updates the usage
of previous macros via DTS fixup.
Fixes#10993
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The USB mass storage documentation was completely outdated. Rewrite it
using reStructuredText, and mentioning the two possible overlays.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move configuration to overlay-netusb.sonf, enable zero-configuration,
working with LLMNR in Windows and avahi-autoipd in Linux.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move the GPIO info for the buttons into the dts, this lets us match what
all other boards are doing. Update some sample & test code to use the
dts generated SW0_GPIO_CONTROLLER define instead of SW0_GPIO_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't need board.h, but by including it we would end up picking up
stdio.h from somewhere which we need for sprintf. So just included
stdio.h and drop board.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For blink_led, fade_led, and rgb_led, we only need board.h for the
hexiwear_k64 board. Remove other references to board.h and only
include it if we are building on hexiwear_k64
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The HID mouse sample uses the GPIO to read the state of a button, but
does not enable CONFIG_GPIO, causing the example to fail. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Adds a new configuration to the peripheral_hr sample that utilizes the
frdm_kw41z as a ble controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Stop specifying that the 'remote' app should use the same board as the
root app.
Also, add assertions to make sure that the user does not try to
override the board that is specified in the app build scripts.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Stop specifying that the OpenAMP 'remote' app should use the same
board as the root app.
Also, add assertions to make sure that the user does not try to
override the board's that are specified in the app build scripts.
This fixes#10345
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Defined common publisher i.e. gen_level_publisher() for
all three gen. level related messahe handlers.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
The BBC micro:bit uses a baudrate of 115200 for the hci_uart
sample. Add a note about this to avoid any confusion.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Add a new "heartbeat" message so that number of hops between nodes can
be discovered. Also add a statistics page which can be toggled using a
long key press, showing local information and the top message senders.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If user aggresively vary the state then previous mechanism
failed to publish status of other bounded states since it
has to publish multiple things back to back.
This PR repair the things.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
If transition is in process, then as per current implementation bound
states only respond with Present value. But with this commit, now
bound states too would respond with present, target & remaining time
values in status response.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Redefine opcode values for Vendor Model to mimic like
Generic OnOff Server opcode values for sake of convenience.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Now in case of Generic Delta handler, if message with same TID
received after 6 seconds with same source address would consider
as new transaction instead of ignoring it.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
With this commit it is now possible to save some Mesh Model
Servers State on SoC flash. This impacts initialization &
state binding after NODE reset & that is why some additional
modification has done as per requirements & removed some
code & comments which are redundant as per current
implementation.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
In general, Bluetooth Mesh provisioning process could be failed
because of any reason. Using some h/w interrupt we can call
bt_mesh_reset() or something which will push device into factory
reset mode.
But with some actual products it is not always possible or feasible
to add extra h/w to achieve this goal.
This commit adds facility to push device into factory reset mode
using power reset. As per current implementation user have to
do 5 times reset so that gap between two consecutive reset
should not exceed 7 seconds.
Co-authored-by: Laczen JMS <laczenjms@gmail.com>
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
With this commit, IUT will send additional status responses
whenever required as per PTS requirements.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Separately defined functions for Servers. This would help
to send extra status responses whenever required.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This updates documentation to account for the new shell which
does not support 'select' for command context anymore.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The wifi shell sample asserts when trying to do a sleep
forever.
The sleep should not be necessary, so removing it.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
A few issues with the dts support for the SSD1306 display driver:
1. binding file mixed description & generation up together
- rename most uses of generation to description and add proper
generation field into yaml
2. Drop use of BASE_LABEL, this shouldn't be used by most bindings
3. dts defines that are being assumed in driver aren't correct. We
should be using a dts_fixup.h in the sample to map the generated
defines to those used in the driver. We remove the incorrect
defines that the driver assumes right now.
4. Fixup 'segment-remap' and 'com-invdir' properties that are booleans
in the binding file and associated code changes.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The "zperf udp download" optional port parameter was not properly
checked, the default port check branch was never reached.
Fix also the same issue in tcp download command.
Coverity-CID: 188881
Fixes#10758
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change the default behaviour of the host network interface
setup. Now user needs to execute net-setup.sh script from
net-tools project to setup host ethernet interface. The script
needs to be run as a root user. Then zephyr.exe can be started
as a normal user.
Example:
cd net-tools
sudo ./net-setup.sh
This will create zeth network interface and set IP address and
routes properly. See other command line options by typing
./net-setup.sh --help
Old behaviour is still there if one enables
CONFIG_ETH_NATIVE_POSIX_STARTUP_AUTOMATIC=y
in which case one needs to use the command
sudo --preserve-env zephyr.exe
to start the Zephyr process.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that log processing happens in a separate thread, the
BT_STACK_EXTRA macro is not needed (since there's no significant
overhead), and therefore the BT_STACK macros become unnecessary as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Provide basic commands for configuring/setting/reading GPIO ports.
> gpio conf ..
> gpio set ..
> gpio get ..
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Driver fxos8700 can also be used for the MMA8451
accelerometer and offers more functionality.
Revert the commit to avoid duplicate code.
This reverts commit 70a35e2346.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add console harness support for USB mass storage test.
Also, using overlay config for DISK_ACCESS configuration
and accessing the different config file with different
method.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This flag is an indication to the timer driver that the OS doesn't
care about rollover conditions of the tick count while idling, so the
system doesn't need to wake up once per counter flip[1]. Obviously in
that circumstance values returned from k_uptime_get_32() are going to
be wrong, so the implementation had an assert to check for misuse.
But no one understood that from the docs, so the only place these APIs
were used in practice were as "guards" around code that needed to call
k_uptime_get_32(), even though that's 100% wrong per docs!
Clarify the docs. Remove the incorrect guards. Change the flag to
initialize to true so that uptime isn't broken-by-default in tickless
mode. Also move the implemenations of the functions out of the
header, as there's no good reason for these to need to be inlined.
[1] Which can be significant. A 100MHz ARM using the 24 bit SysTick
counter rolls over at about 6 Hz, and if it had to come out of
idle at that rate it would be a significant power issue that would
swamp the gains from tickless. Obviously systems with slow
counters like nRF or 64 bit ones like RISC-V or x86's TSC aren't
as affected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove redundant 'sample' tag and add something that matches the
functionality and features being tested, demonstrated.
Avoid short abbriviations and using full names for fs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add sample application for LSM303DLHC, ST MEMS
system-in-package featuring a 3D digital linear
acceleration sensor and a 3D digital magnetic
sensor.
Enable sample to build on stm32f3_disco board
during sanitycheck.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
ROM consumption is higher with new shell which prevents
quark_se_c1000_devboard from building. Remove that board
from sanitychecker runs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use new shell instead of the legacy one. This commit also fixes
the configuration file mess and allows the program to be run on
more hardware.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There were no shell commands implemented so remove the shell
support from this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed obsolete CONFIG_SYS_LOG_* and CONFIG_NET_DEBUG_* options
from various sample and test applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The conf file contained obsolete config options and it was
not really used. Cleaned also the sample.yaml file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, wifi-enabled samples were not built by sanitycheck for the
cc3220sf_launchxl.
This patch gets the sockets echo sample to build.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Also, defines one LOG_MODULE_NAME for the simplelink WiFi driver, and
uses the same name for all files in this driver (module).
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
If user will enable shell than for each backend shell instance
will be created automatically.
Update all shell examples according to the new initialization
procedure.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The $srctree environment variable gives the path relative to which
'(o)source' statements work (the current directory is used if $srctree
is unset). It is set to $ZEPHYR_BASE in cmake/kconfig.cmake, so there's
no need to qualify the source of Kconfig.zephyr in sample Kconfig files
(or in external projects).
All 'source's in Zephyr assume that the Zephyr root directory is used as
the srctree as well, and would break otherwise.
Remove the $(ZEPHYR_BASE)s to make it clearer that all 'source'
statements work relative to the Zephyr root. There was some user
confusion on IRC.
Also explain how things work in the documentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactor USB writes, start transfer only when device
is configured, the change makes it possible to work with native_posix
USB virtual controller.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Some terminals literally interprets shell output data. Hence to print
a message in new line shell needs to send `\r\n` each time. To minimize
flash usage user can now send `\n` as a line delimiter and shell will
automatically add missing CR character.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This commit updates the mem_domain_apis_test sample and the
mem_protect test, so they can compile and execute in ARMv8-M
platforms, which do not support the P_RW_U_RO access permissions
combination (privileged read/write, unprivileged read-only). The
modification consists of, simply, selecting a different access
permission (P_RO_U_RO) when building for ARMv8-M MPUs with the
unmodified ARM MPU architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Decrease number of buffer for sanity check, in real sample logs
consuming a lot of memory might be traded for buffers. The sample was
failing for quark_se_c1000_devboard.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The Zephyr configuration system uses many different files in many
different formats. It makes it a lot easier for users to understand
what these files do if when we use the correct file extensions.
To this end we rename the dts.fixup files to the correct file
extension '.h'.
This is a breaking change for out-of-tree fixup files. Such files will
be detected and given an appropriate error message.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix bluetooth config dependencies where the definitions depend on other
definitions.
BT_RX_PRIO is not always defined in a controller only build.
BT_CTLR_TX_BUFFER_SIZE does not depend on BT_CTLR, but BT_LL_SW.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The way uart console is setup for this is not compatible with the logger
and needs additional changes, excluding until we have this implemented
in a generic way.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As the sample.yaml file was missing, then sanitychecker did
not testing any wifi drivers or other wifi related APIs.
Fixes#10389
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added functionality to enable active shell backends via Kconfig
file. When there will be more backends implemented user will
have an option to select only required ones.
It is no longer needed to select SERIAL in prj.conf.
Fixes#10190
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The application won't work anymore as it uses the old syslog
logging and networking is now converted to use the new logger
so there is no need for this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add "openthread" tag for sanitychecker when it is running
OpenThread specific tests. This way it is easier to run just
those few OpenThread specific tests.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixed a bug in the OpenAMP sample's recursive build scripts, where it
would pass on the wrong board to it's second CMake invocation.
This fixes#10345
Fixed the same bug in ipm_mcux.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
1. Shell will accept CR or LF as line delimiter.
2. Macro SHELL_DEFINE simplified - it no longer requires
new line character.
3. Fixes: #10207.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
1. Command handler can return command exectution status as int.
2. Existing command handlers rework.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Every board that uses dts-enabled gpio drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_GPIO_DEVICE and
HAS_DTS_GPIO.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_DEVICE and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled i2c drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_I2C_DEVICE and
HAS_DTS_I2C.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a board-specific dts overlay and fixup file to the arduino_101
environmental sensing sample, in preparation for making the sensor
drivers require dts.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Extending logger to support logging transient strings (with %s).
With dedicated call (log_strdup), string is duplicated to a buffer
from internal logger pool. Logger implicitly manages the pool.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is very inconvenient to maintain an application that both runs on a
Zephyr board and an out-of-tree board.
It forces one to write build scripts like this in the app:
if(BOARD STREQUAL my_out_of_tree_board)
set(BOARD_ROOT some/out/of/tree/board/path)
endif()
To avoid this we change the semantics of BOARD_ROOT. Instead of it
being a path to the board root it is now a prioritized list of board
root directories. Zephyr will append ZEPHYR_BASE to BOARD_ROOT.
This ensures that Zephyr boards can be used when the out-of-tree board
directory can not supply the requested board.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The shell subsystem, as it is today, depends on having a UART,
therefore let's add the dependency explicitly in its Kconfig
Fixes#10190
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
- Use new k_thread_name_set to set thread names.
- Use board name in sample instead of architecture.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
prj_stack_guard.conf not related to this sample, we have tests other
samples for stack guard testing/demonstration.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Kconfig option CONFIG_BUILD_TIMESTAMP became unused when
BUILD_VERSION was introduced, but it's option and parts of it's
implementation was not completely cleaned from the repository.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
With recent changes, sockets no longer depend on Newlib libc, so
let's have actual samples which demonstrate this. echo_client/
echo_server, which were ported from net_app samples, are converted.
The rest of socket samples are intended to be buildable on a
POSIX system (e.g. Linux), so they rather stay with more
full-fledged libc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Unify method of enabling secure TLS sockets in samples by using TLS
overlay config file instead of standalone config files.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Avoid having not-necessarily board specific configs in a separate file.
Instead, have a single project file with appropriate overlay configs.
Board specific configurations can be added in future if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The periphreal_sc_only sample app wasn't very clearly logging
information about pairing failures and could give the false
impression that everything work when it doesn't. Enable some more
logging Kconfig features and take advantage of the pairing complete &
failed callbacks to give more information to the user.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This sample is made to demonstrate use of shield x-nucleo-ik01a1.
It will display embedded sensor data endlessly.
It requires a board with Arduino i2c as minimum configuration
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
It is no longer necessary to set the KCONFIG_ROOT variable when the
KConfig file is in the application root directory.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add harness console and include regex for output
pattern matching to determine correctness of
sample execution.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The ARM_MPU_NRF52X option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_NRF52X option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
If user enables VLAN support, then the sample application will
create two extra VLAN network interfaces for testing purposes.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for VLANs which are disabled by default.
The application can be configured to use the VLANs by setting
the IP addresses properly in config file. The VLAN support in
this sample application is only meant for testing multiple network
interface handling.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for VLANs which are disabled by default.
The application can be configured to use the VLANs by setting
the IP addresses properly in config file. The VLAN support in
this sample application is only meant for testing multiple network
interface handling.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user enables VLAN support, then the sample application will
create two extra VLAN network interfaces for testing purposes.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The spi project configuration was incorrectly enabling i2c, which causes
a cmake failure if a board supports spi but not i2c. Found by CI when
adding spi support to the mimxrt1050_evk board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add support for nRF boards by using the software-based PWM driver. The
prescaler has to be configured so that the clock runs slower in order to
make the on-board LED blink in the way it is described in the Readme.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Fixed building with ninja adding BUILD_BYPRODUCTS based on suggestion
from @SebastianBoe in issue #7760.
Fixes#7760
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the POSIX arch, time does not pass inside infinite loops.
=> Add a small delay in each iteration of those loops
when compiled for it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix the Id of the longarray message.
Also change the display of the "Address" entry to use "Id" instead of
"Entry" to be consistent the other displayed entries.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_NRF51822_QFAA
CONFIG_SOC_NRF51822_QFAB
CONFIG_SOC_NRF51822_QFAC
CONFIG_SOC_NRF52810_QFAA
CONFIG_SOC_NRF52832_QFAA
CONFIG_SOC_NRF52832_CIAA
CONFIG_SOC_NRF52832_QFAB
CONFIG_SOC_NRF52840_QIAA
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There is no reason why this sample should have a higher version required
of CMake in order to build.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As per PTS, IUT is expected to return success for the
Range Get messages (Light Lightness Range Get for
MMDL/SR/LLNS/BI-01-C, Light CTL Temperature Range Get
for MMDL/SR/LCTLS/BI-01-C). This commit take care of
this issue.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Now if transition (instantaneous or non-instantaneous) is due
to delta level, then state binding would be as per it.
This is as per 3.3.2.2.3 of Bluetooth Mesh Model
Specification.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Corrected spelling mistakes for content of enum defined in
transition.h & renamed some functions. Corrected comments
in main.c
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
With this it is possible to get proper target value & remaining
time in status response from Servers when transition in progress.
If transition is not in progress then those things would not
get integrate into status response. This is as per Bluetooth
Mesh Model specification.
It is inspired concept from Bluetooth Mesh Developer study
Guide.
Also updated Transition Time (TT) related parameter calculation.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added Generic Default Transition Time Server & Client
Models names in list of Models supported by this App.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
UART pins (TX, RX, RTS, CTS) are now configured in DTS files.
RTS and CTS definitions are optional. If flow control is enabled
and RTS/CTS pins are not defined, then compiler will issue
an error message.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
With the new Kconfig preprocessor (described in
https://github.com/torvalds/linux/blob/master/Documentation/kbuild/
kconfig-macro-language.txt), the syntax for expanding environment
variables is $(FOO) rather than $FOO.
$(FOO) is a general preprocessor variable expansion, which falls back to
environment variables if the variable isn't set (like in Make). It can
also be used in prompts, 'comment's, etc.
The old syntax will probably be supported forever in Kconfiglib for
backwards compatibility, but might as well make it consistent now that
people might start using the preprocessor more.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This converts the http links within the Zephyr document
into references. This allows the links within the PDF file
to jump to the correct sections instead of going to
the Internet.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit updates the power_mgr sample to use the dts-generated
defines instead of the aliases in board.h.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
This commit updates the onoff-app sample to use the dts-generated
defines instead of the aliases in board.h.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
This commit updates the onoff_level_lightning_vnd_app sample
to use the dts-generated defines instead of the aliases in board.h.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
This commit updates the button sample to use the dts-generated
define to configure the button pull-up when the custom define
is not present.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Add a prj conf file for the TI cc3220sf_launchxl board
to enable socket offload to the simplelink WiFi driver.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Refactor IPv6 address lifetime timer setting in net_if_addr to support
longer lifetime than 24 days.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The latest mbedTLS (2.12) release increased resources requirements on
Zephyr, so it was required increasing the minimum SRAM to run this test
and the main stack size.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
While it's possible to define which mbedTLS config header to use, our
samples should use config-tls-generic.h as default because this header
is configurable through Kconfig.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This removes these network sample applications
samples/net/coaps_client
samples/net/coaps_server
as they are using low level mbedtls APIs. You should use
preferably socket based or net-app based applications.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Payload variable can hold max 64 bytes but value of size can be more
than that. Memsetting using value of size can overrun payload array.
Fixes coverity issue.
Coverity-CID: 187823
Fixes: #9638
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This removes these network sample applications
samples/net/mbedtls_sslclient
samples/net/mbedtls_dtlsserver
samples/net/mbedtls_dtlsclient
as they are using low level mbedtls APIs. You should use
preferably the samples/net/sockets/echo_[server|client] applications
instead, or as a last option use net-app based applications
in samples/net/echo_[server|client] if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
sample/net/README no longer exists so this removes its mention since
it is already described how to use echo-client at the end of the
document. Also state that CONFIG_BT_6LOWPAN shall be set in order to
use Bluetooth 6LoWPAN module with Linux.
Fixes#9727
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rename GPIO_INT_CONF to GPIO_FLAGS in order to be able to use
the definition generated by the devicetree, eliminating the need
for definition in the board.h file
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
Due to a change in the company name, the LwM2M copyrights need
to be changed from "Open Source Foundries Limited" ->
"Foundries.io".
Signed-off-by: Michael Scott <mike@foundries.io>
The fault dump text has changed since this sample was originally
written, so update the README accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The mpu_stack_guard sample was failing in both configurations on arm
platforms. Fix the regexes in sample.yaml so they work on multiple
architectures.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The nvs sample assumed a 1 KB flash erase block size, which caused the
sample to fail on frdm_k64f because its erase block size is 4 KB. Get
the erase block size from dts instead.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Removes the platform whitelist, leaving just the depends_on/supported
pattern to select which platforms the sample can run on.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit adds settings module to the peripheral_hids that makes
bonding persistent.
Now it is possible to connect with previously bonded device.
Fixes#9580
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Per: http://pubs.opengroup.org/onlinepubs/009695399/functions/socket.html
"Upon successful completion, socket() shall return a non-negative
integer, the socket file descriptor."
The test in prepare_fds() however fails if socket fd is
zero (non-negative), which should be a valid value.
This was found while testing the SimpleLink socket offload driver,
which can return a zero-valued socket fd, per the POSIX spec.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This sample application produces slightly different outputs based on
the chosen driver configuration mode. In Measuring Mode with trigger
support, the acceleration on all three axis is printed in m/s^2 at
the sampling rate (ODR). In polled Measuring Mode the instantaneous
acceleration is polled every 2 seconds. In most high-g applications,
a single (3-axis) acceleration sample at the peak of an impact event
contains sufficient information about the event, and the full
acceleration history is not required.
In this Max Peak Detect Mode the device returns only the over
threshold peak acceleration between two consecutive sample fetches or
trigger events. Instead of printing the acceleration on all three axis,
the sample application calculates the vector magnitude
(root sum squared) and displays the result in g rather than in m/s^2,
together with an bar graph.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Update yaml files to include warp7_m4 board in the platform_whitelist
for fxos8700 and fxas21002 sensors.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We will implement this as a core feature using tracing points and make
it available to any application.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
WDT_NRFX is now enabling by default. Its configuration from proj.conf
files was removed.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
I removed GPIO configuration from board files and enabled them
as default in driver Kconfig file. All boards had GPIO ports
enabled that is why I decided to enable it by default.
Power management example was changed to use new driver.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
This commit contains several fixes for DTLS implementation, proposed in
a post-merge review of #9338.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of having one delayed_work struct / IP address, use
only one delayed_work struct for lifetime timer. This saves
over 20 bytes / allocated address struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With the recent changes to identity address handling the local
identity address is only guaranteed to be available once
settings_load() has been called. Move the initialization of dev_uuid
to the appropriate place.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a sample application to show the LP5562 driver. The three RGB
channels are used to set multiple colors after each other under the
assumption that accordingly colored LEDs are connected. Blinking is also
shown in multiple colors.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Added transition time support. Now if NODE received optional
parameters then they would get entertained by it.
Added two new models that is Generic Default Transition Time
Server & Client resp. to complete overall architecture to
support newly introduced architecture.
With this it was possible to implement
gen_move_set/gen_move_set_unack message handlers.
Removed redundancy from App & revised overall implementation.
Fixed Bugs. Upgraded coding style. Added & replaced comments to
improve code readability. Improved printk messages.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added time stamp based message filtering as per Bluetooth Mesh
Developer study guide for each Server. Now even if message
source address & TID is same even after 6 seconds then
that will get proceed otherwise will get ignored.
Coding style improvements.
If particular Server model receive Prohibited values as per
Mesh Model Specification then that message will not get entertained.
Now proper status code will get send if user upgrade
light_lightness_range_state & light_ctl_temperature_range_state.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Upgraded state binding algorithm & created separated
file for it. Moved light_default_status_init() from
device_composition.c to main.c. Shorten variables names
defined in struct light_lightness_state.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Fixing the min max range validation where condtions on
upper and lower bound are logically 'ANDed'. Fixing it
by logical ORing the result.
CID: 18325, 18326
Fixes Issue #9289
Fixes Issue #9290
Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add DTLS support to socket echo_client and echo_server samples.
Additionally, move TLS-related configs to overlay-tls.conf config file,
to align with other examples.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
On flash NVS was stored one entry after another including the metadata
of each entry. This has the disadvantage that when an incomplete write
is performed (e.g. due to power failure) the complete sector had to be
rewritten to get a completely functional system.
The present rewrite changed the storage in flash of the data. For each
sector the data is now written as follows: the data itself at the
beginning of the sector (one after the other), the metadata (id, length,
data offset in the sector, and a crc of the metadata) is written from
the end of the sector. The metadata is of fixed size (8 byte) and for
a sector that is completely occupied a metadata entry of all zeros is
used.
Writing data to flash always is done by:
1. Writing the data,
2. Writing the metadata.
If an incomplete write is done NVS will ignore this incomplete write.
At the same time the following improvements were done:
1. NVS now support 65536 sectors of each 65536 byte.
2. The sector size no longer requires to be a power of 2 (but it
still needs to be a multiple of the flash erase page size).
3. NVS now also keeps track of the free space available.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The nvs module has some disadvantages for larger block size. The data
header and slot are taking up to much space. A rewrite is proposed that
reduces the used storage space for systems with write block size > 4.
The data storage in flash is now one unit consisting of: data_length,
data_id, data and data_length again in a multiple of the write block
size. The data_length at the end is used to validate the correctness of
the flash write and also allows to travel backwards in the filesystem.
As a comparison, on a system with block size 8 byte, a 32 bit values
now fits 1 block including the metadata (length and id). This used to
be 3 blocks.
The data_length will occupy 1 byte if the data length is less than 128
byte, it will occupy 2 byte if the data length is 128 byte or more. The
data length is limited to 16383 byte.
Each write to flash is verified by a read back of the data.
The read performance is improved because reading is done backwards so
the latest items are found first.
When the filesystem is locked it can be unlocked by calling
reinit(), this will clear flash and setup everything for storage.
add sample documentation - README.rst
Update dtsi to include erase_block_size, use erase_block_size in sample
Update prj.conf to include CONFIG_MPU_ALLOW_FLASH_WRITE
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This will make adding properties to symbols in the base Zephyr Kconfig
files work the same as before.
I didn't actually spot any such cases, so this is just to play it safe.
It also makes the sample Kconfig symbols appear at the top in the
menuconfig interface, which might be nice.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These are no longer required. Kconfiglib expands references to
environment variables directly.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CMake has several prototypes/signatures for the function
'target_link_libraries'. This commit migrates the usage of
'target_link_libraries' on Zephyr CMake libraries from the old 'plain'
signature to the new '<PRIVATE|PUBLIC|INTERFACE>' signature.
For technical reasons the two signatures can not be mixed. Each
library must exclusively use either the old or new signature.
The 'old' plain signature is equivalent to using the PUBLIC
signature. Migrating to use 'PUBLIC' is therefore expected to be a
safe change.
After the migration it will be possible to use the PRIVATE and
INTERFACE signatures on Zephyr CMake libraries. This is useful for
instance to fix issue 8438.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The old GCC ARM Embedded website on launchpad
(https://launchpad.net/gcc-arm-embedded) has been superseeded by the new
GNU Arm Embedded one
(https://developer.arm.com/open-source/gnu-toolchain/gnu-rm).
This also means a change of name from "GCC" to "GNU". Reflect this in
the enviroment variables so that the proper term is used henceforth.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Some reST syntax errors and doc edits got missed during the review
of PR #561 causing problems in the generated HTML.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch aligns documentation to changes in imagetool.py released
in mcuboot 1.2 (latest release).
Also adds note about workaround for possible timeout while erasing
image-slot on some devices (like nRF52840 SoC)
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The application does nothing useful, it just enables Link Layer
Discovery Protocol support which starts to send LLDP network packets
to ethernet network interface. Note that the LLDP packets are only
sent to those network interfaces that claim to support LLDP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Remove NET_LOG / NET_BUF_LOG settings, instead just enable SYS_LOG
- Simplify by also removing SYS_LOG_SHOW_COLOR, INIT_STACKS and
NET_STATISTICS. These can be enabled by user if wanted/needed.
Signed-off-by: Michael Scott <mike@foundries.io>
Allow user to configure a program that is executed after the
network interface is created and IP address is setup.
This can be used e.g., to start wireshark to capture
the network traffic of the interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Default value 2 was not enough for mcast addresses table.
Core stack adding mcast addresses on various reasons. Also
coaps_client trying to create mcast context for some purpose.
mcast address is not in lookup table, so binding fails. Add
CoAP sample related mcast address to table and then bind the
context.
Fixes#9131
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Let's add an overlay file to enable using the WNC-M14A2A LTE-M
modem with the LwM2M client.
Also, update documentation for it's use.
Signed-off-by: Michael Scott <mike@foundries.io>
Adding IPv4 autoconf sample application that can be used to
test IPv4 autoconf functionality.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This app will not fit in the 96b_nitrogen board with ECC enabled.
"real-ld: region `SRAM' overflowed by 68 bytes". Disable the feature
explicitly since a subsequent patch will auto-enable it for all
combined Bluetooth Host-Controller builds.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Thread registers multiple unicast and multicast adresses by default. As
they are exchanged with Zephyr interface, we need enough buffers to
store them all.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds TLS support to socket echo_client/echo_server samples.
Credentials used are the same as in the non-socket versions of these
samples, therefore they can be easily tested with net-tools utils.
Maximum payload size for the client was sligtly reduced to fit the
encrypted data within 1280 bytes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add CA certificates to http_get and big_http_download samples. Use
socket options to configure TLS connection - TLS certificates are now
validated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Mesh specification doesn't support more than 32 transport layer
segments, the way the number was so far derived from the advertising
buffer count could result in a highre numbe than 32, thereby wasting
memory. Make the number of supported segments build-time configurable
through a new BT_MESH_TX_SEG_MAX configuration option.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The number of buffres influences e.g. the maximum SDU size, which in
turn influences call stack consumption. Use lower values where a high
number of buffers isn't necessary, and use the default (6) where it's
sufficient.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Do not enter Low Power states once the test execution is done. This
is needed to avoid the flashing issues which were seen when system
is in deep sleep states.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Refactor the prj*conf files so that there is only one master
prj.conf and several overlay conf files that add / change
only minor subset of functionality.
Use the overlay files like so:
cmake -DBOARD=nrf52840_pca10056 \
-DOVERLAY_CONFIG=overlay-ot.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The logic for error checking after net_pkt_pull was inverted -
build_pkt_reply would exit in case net_pkt_pull succeeded. In result no
responses were sent by echo_server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If -fno-strict-overflow compiler flag is disabled, then this warning
is printed:
samples/net/throughput_server/src/server.c:157:6: \
error: assuming signed overflow does not occur when assuming \
that (X + c) >= X is always true [-Werror=strict-overflow]
if (new_print > curr) {
Fixes#8924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor the prj*conf files so that there is only one master
prj.conf and several overlay conf files that add / change
only minor subset of functionality.
Use the overlay files like so:
cmake -DBOARD=nrf52840_pca10056 \
-DOVERLAY_CONFIG=overlay-ot.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If echo-server receives a IPv6 packet with large header (e.g HBHO)
build_reply_pkt() function failed to remove IPv6 header. Reason is
net_buf_pull() doesn't work if header length is more than one
fragment. net_pkt_pull() solves the issue.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This force CONFIG_BT_DEVICE_NAME_MAX to be set even in boards where
CONFIG_BT_SETTINGS won't be defined so it exercise such configuration.
In addition to that set a long name that would not fix in the
ScanData.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixing copy paste error, where ipv4 member of
the structure is used in ipv6 branch.
CID: 187074
Fixes Issue #8992
Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com>
On some architectures tick time cannot be expressed as integer
number of microseconds, introducing error in calculations using
sys_clock_us_per_tick variable.
This commit deprecates the sys_clock_us_per_tick variable and
replaces its usage by more precise calculations based on
sys_clock_hw_cycles_per_sec and sys_clock_ticks_per_sec.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Enabling internal processing thread allows implicit initialization
and processing log messages in case mutlithreading is enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
With the change to the configuration files, we can now compile
this sample for any platform that uses only the default prj.conf file:
nrf52840_pca10056
nrf52840_pca10059
usb_kw24d512
Update the sample.yaml file to remove the excludes.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's rename README to README.rst and add:
- Some nice formatting for existing content
- Requirements section (including handy links)
- Build and Running section (including multiple overlay options)
Signed-off-by: Michael Scott <mike@foundries.io>
Add support for NXP MCR20A 802.15.4 module as an overlay config file.
Use this file like so:
cmake -DBOARD=usb_kw24d512 \
-DOVERLAY_CONFIG=overlay-mcr20a.conf ..
Signed-off-by: Michael Scott <mike@foundries.io>
Add support for TI CC1200 802.15.4 module as an overlay config file.
Use this file like so:
cmake -DBOARD=quark_se_c1000_devboard \
-DOVERLAY_CONFIG=overlay-cc1200.conf ..
Signed-off-by: Michael Scott <mike@foundries.io>
When the CC2520-specific configs are removed from the prj.conf
file, the sample can be built for hardware that supports
802.15.4 natively w/o any changes to the prj.conf like so:
cmake -DBOARD=nrf52840_pca10056 ..
cmake -DBOARD=usb_kw24d512 ..
The CC2520-specific settings now live in overlay-cc2520.conf
which can be used like so when building for devices that can
use it:
cmake -DBOARD=quark_se_c1000_devboard \
-DOVERLAY_CONFIG=overlay-cc2520.conf ..
Later, support for other optional HW like CC1200 and MCR20A
can be added in a similar way.
Signed-off-by: Michael Scott <mike@foundries.io>
ESP32 does not like newlib, exclude for now to get a clean sanitycheck
run. We have issues about this already.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Documenting new logger features: waking up processing thread
and internal logger processing thread.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When enabled, logger is creating own thread which processes buffered
logs. When no logs to process, thread sleeps for configurable period.
Thread can be waken up if number of buffered log messages exceeds
configured threshold. Logging sample aligned to use new feature.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Explicity cast to unsigned char so we deal with both this warning and
possible warning when -Wpointer-sign is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removed redundant and unused config options from conf files.
Added separate files for handing power management and device
handling functions.
Added the PM policy based on the next timeout event instead of
simply advancing to the next power state.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Log API can be used before user can explicitly initialize the logger.
In order to ensure that logger core is ready to buffer log messages
it must be initialize as early as possible. Initialization does not
include initialization of default backend since driver may not be
ready and backend is needed only when log messages are processed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add config file that enables to run http_get and big_http_download
samples with TLS enabled and receive the data through HTTPS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Explicity cast to unsigned char so we deal with both this warning and
possible warning when -Wpointer-sign is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If temperature value are out of range which is from 0x0320
to 0x4E20 then no relevant get message handler will execute.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added extra case under state binding's switch statement for
Lightness i.e DELTA_LEVEL. Also upgrade binding between
1. root element's LEVEL state & Light Lightness Actual state.
2. Light Lightness Linear state & Light Lightness Actual state.
3. Light CTL lightness state & Light Lightness Actual state
This is as per Bluetooth Mesh Model Specification 3.3.2.2.3.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Now on reboot, NODE as client do not start message publishing
with TID = 1. Instead of that it would start with any random value
from 0 to 255.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Improved code readability by declaring some pre-processor
definitions in device_composition.c
Remove model_instance variable from some structures define in
device_composition.h & its relevant code.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Update Vendor model message handlers & make it to work as per
TID like other Models defined by SIG. Removed union based data
extraction mechanism.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Updated state Binding as per PTS test requirements. Now if
gen_onoff_server & gen_onpowerup_server received Prohibited values
then they will not react on it further. Plus make necessary changes
wherever required for message handlers as per Mesh Model
Specification which is mostly regarding to default & range values.
Now right Status code would get publish in response to set lightness
& temperature range. Also upgrade Message handler
gen_delta_set_unack() algorithm as per PTS requirements.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This simple application periodically prints the ambient temperature.
Optional support for threshold triggers is provided.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Current config files for TLS qemu_x86 contain unrecognized
`CONFIG_RAM_SIZE`, which causes cmake to fail during project generation.
They should not be needed anyway, as qemu_x86 defaults to 8 MB of RAM.
Additionaly, echo_client crashes in this configuration with default main
stack size, hence increase it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add loopback function. This function can be used to test
USB device drivers and device stack connected to linux host
and has the similar interface as "Gadget Zero" [1] of the Linux
kernel.
Use modprobe usbtest to load the module, see also [2] for the
description of the tests and for Vendor and Product ID of the
"Gadget Zero". The userspace tool testusb [3] is needed to start
the tests.
[1] linux/drivers/usb/gadget/function/f_loopback.c
[2] linux/drivers/usb/misc/usbtest.c
[3] linux/tools/usb/testusb.c
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Allow gPTP code to be run as a linux process and communicate
with gPTP daemon running in linux host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed redundancy from state binding & make it simplified.
Avoid partial state binding in case of state_binding() function
get called with invalid or IGNORE arguments.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Changes buffer length for all GET handlers as per patter of
< 2 + parameters length (in bytes) + 4 >
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This patched improved architecture of already implemented Vendor
Model. Now there are 4 separate opcodes for Vendor viz;
get, set, set_unack & status. This helps to setup
<command + response> mechanism.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
These two tests ask for lots of priority levels, more than the 32
maximum allowed by SCHED_MULTIQ (which is by design: if you have
requirements like that DUMB or SCALABLE are better choices due to the
RAM overhead of MULTIQ), so the build will fail on boards that defined
MULTIQ as default.
Don't let the platform choose the scheduler backend, ask for SCALABLE
explicitly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Zephyr 1.12 removed the old scheduler and replaced it with the choice
of a "dumb" list or a balanced tree. But the old multi-queue
algorithm is still useful in the space between these two (applications
with large-ish numbers of runnable threads, but that don't need fancy
features like EDF or SMP affinity). So add it as a
CONFIG_SCHED_MULTIQ option.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
By default gPTP is not run over VLAN but if needed that can be
done by setting CONFIG_NET_GPTP_VLAN and CONFIG_NET_GPTP_VLAN_TAG
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we enabled SEGGER support on the nRF51 series SoCs, this sample
started to fail due to small amount of memory avaiable on some nRF51
SoCs. This commit updates the min_ram property in order to exclude
failing boards from the build.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Add sample application for NXP PCA9633 LED driver. This application
test the 4 LEDs by doing the following:
- turn on LEDs
- turn off LEDs
- set the brightness to 50%
- turn off LEDs
- blink the LEDs
- turn off LEDs
The application is based on the stm32373_eval board and expects to have
a PCA9633 LED driver on the bus I2C-1 at the address 0x62.
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Removed TID implementations wherever it is not required as per
Bluetooth SIG Mesh Model Specification. Removed unnecessary
comments. Add status code value to get publish along with
Light Lightness range status message.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Update message handlers & correct nubmber of bytes that every
handlers should fetch for their further processing as per
Bluetooth SIG Mesh Model Specification.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
When we enabled SEGGER support on the ST SoCs we now how some systems
with really small amounts of memory that the sample can't be built for.
Set a min_ram to exclude such systems.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This allows zephyr to listen LLMNR DNS queries sent by Windows
and respond to them. See RFC 4795 for details.
The feature requires that hostname is set properly to the
zephyr device and LLMNR is configured properly.
Typically following config options are enough for this support:
CONFIG_NET_HOSTNAME_ENABLE=y
CONFIG_NET_HOSTNAME="zephyr-device"
CONFIG_DNS_RESOLVER=y
CONFIG_LLMNR_RESPONDER=y
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By default the LLMNR is disabled in this sample. You can enable
it by setting CONFIG_LLMNR_RESOLVER=y
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The application does not do much, it just registers to a callback
in order to get information about gPTP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is not necessary to link 'app' with mbedTLS because mbedTLS is
covered by the 'APP_LINK_WITH_MBEDTLS' mechanism that automatically
links 'app' with mbedTLS.
This patch removes the redundant target_link_libraries invocations.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Make corrections in state binding of Servers as per Mesh Model
Specifications. Previously, when OnPowerUp state equal to 0x02,
then Light Lightness actual state was not assign to last power
down value. Plus when Generic OnOff state changes by client,
then Light Lightness Actual state value get assigned as Light
Lightness Last value instead of default one.
All these issues has fixed here.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This is a application demonstrating a Bluetooth mesh node in
which Root element has following models
- Generic OnOff Server
- Generic OnOff Client
- Generic Level Server
- Generic Level Client
- Generic Power OnOff Server
- Generic Power OnOff Setup Server
- Generic Power OnOff Client
- Light Lightness Server
- Light Lightness Setup Server
- Light Lightness Client
- Light CTL Server
- Light CTL Setup Server
- Light CTL Client
- Vendor Model
And Secondary element has following models
- Generic OnOff Server
- Generic OnOff Client
- Generic Level Server
- Generic Level Client
- Light CTL Temperature Server
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
CDC ACM is not needed in webusb, communication is going through Bulk
endpoints. Endpoint numbers stay the same only Interface number
changed, so basically only this change is needed:
- .then(() => this.device_.claimInterface(2))
+ .then(() => this.device_.claimInterface(0))
this.device_.claimInterface({2,0}) apart from removing serial port
commands.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Console subsystem is intended to be a layer between console drivers
and console clients, like e.g. shell. This change factors out code
from shell which dealed with individial console drivers and moves it
to console subsystem, under the name console_register_line_input().
To accommodate for this change, older console subsys Kconfig symbol
is changed from CONFIG_CONSOLE_PULL to CONFIG_CONSOLE_SUBSYS
(CONFIG_CONSOLE is already used by console drivers). This signifies
that console subsystem is intended to deal with all of console
aspects in Zephyr (existing and new), not just provide some "new"
functionality on top of raw console drivers, like it initially
started.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Check the return value of close() in socket_dumb_http.c
If non-zero, print the error code
Fixes#8413.
Signed-off-by: Satya Bhattacharya <satyacube@gmail.com>
A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
fixes: #8424
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This enables testing of the scan, connect, and disconnect
wifi_mgmt functions of the wifi shell module for
the cc3220sf_launchxl.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The ARRAY_SIZE() utility macro will actually test the parameter types,
and ensure that it is only called with arrays, and not arrays decayed
to pointers.
Changes were performed with a simple Coccinelle script.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This adds basic support for declaring gpio nodes in dts for nrf52.
The dts.fixup provides mapping for the generated defines to the config
defines currently used by the nrf gpio driver.
Existing boards that use nrf52 are updated.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
