Updated nrf clock control driver to use onoff service for managing
multiple users.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Correct dependency of the TEMP_NRF5 Kconfig option so that it can be
enabled only on nRF SoCs that feature the TEMP peripheral.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Reworked calibration to not use HW platform which is not available on
some platforms (nrf53) and does not bring any value compared to using
system timer. Switched to use k_timer. Additionally, improved
calibration algorithm to request also LF clock before starting
calibration. This simplifies the algorithm because it does not need
to support disabling low frequency clock which in calibration.
Tests has been updated and simplified. Former tests relied on HW timer
event.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Reimplementation of clock control driver for nrf platform. It includes
latest API changes: asynchronous starting and getting clock status.
Additionally, it implements calibration algorithm which optionally
skips calibration based on no temperature change. Internal temperature
sensor is used for that.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended clock configuration to allow usage of external clock
source for nrf52 series.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added option to have LFCLK synthesized from HFCLK. It is not low
power but ensures constant relation between HFCLK and LFCLK and
might be useful in certain scenarios (e.g. testing).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
An external project extending the Zephyr RTOS and its drivers may have
subsystems that must use its own specific driver(s) when active. One
example is the nRF5x NVMC that must be scheduled in between radio
operations. A subsystem may also be dependent on its own drivers for
security, real-time and/or because of hardware constrains.
In order to not introduce non-Zephyr specific code into the Zephyr tree,
an option is added to disable the in-tree drivers in Zephyr. Because
Kconfig does not support a good way of de-selecting other symbols, a
variable on the form `<DRIVER>_FORCE_ALT` is added as a
dependency for each `<DRIVER>`. For example, the out-of-tree subsystem
will select `FLASH_NRF_FORCE_ALT` to disable the in-tree driver. A
solution for issue #8181 would open up for a more general solution,
however #8181 requires significant effort.
Support for out-of-tree drivers is added to Nordic drivers for
clock_control, entropy and flash.
A generic solution for this is desired. Issue #14527 is tracking that
progress.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Add choice variables for CLOCK_CONTROL_NRF_SOURCE and
CLOCK_CONTROL_NRF_ACCURACY such that the choices may be augmented
out-of-tree.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Redefining the config will not let another (out-of-source) driver be
chosen instead of the default. The driver is practically forced by the
soc settings. This commit moves default settings from soc/arm/nordic_nrf
into the drivers themselves.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Renaming Kconfig.nrf5 to Kconfig.nrf in the wake of extending
the use of the nRF clock control driver to both nRF5 and nRF91
SOC series.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-01-15 18:03:24 +01:00
Renamed from drivers/clock_control/Kconfig.nrf5 (Browse further)
