Added CONFIG_UART_ASYNC_API to enable documentation generation for
asynchronous API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add application control of initiating phy change procedure and it's
parameters.
The reasons for allowing the application control over the PHY:
- Allow changing to Coded PHY.
- Application may change PHY to react to changes in environment
to balance throughput and range.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating data length procedure and it's
parameters.
The reasons for allowing the application control over the data length:
- Bandwidth control adjusted based on number of active connections.
- Changing data length before switching to coded phy.
- Applying workarounds for interoperability problems.
- Controlling order of ATT MTU and data length procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add a devicetree/zephyr.h header, which is meant to contain
definitions for /chosen properties specific to Zephyr.
Currently, this just deals with zephyr,entropy. We add a
DT_CHOSEN_ZEPHYR_ENTROPY_LABEL macro which expands to the label for the
node pointed to by zephyr,entropy.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
I've been seeing these cause errors on the more recent versions of
Doxygen which come with Arch Linux for a while now. Fix these:
error: Illegal format for option TCL_SUBST, no equal sign ('=') specified for item 'YES'
$ZEPHYR_BASE/tests/kernel/mem_protect/futex/src/main.c:461: warning: end of file with unbalanced grouping commands
Just trying to get them out of my local output and as preparation for
whenever they start showing up for Ubuntu.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Similar to pairing_confirm this callback is called each
time a peer requests pairing, but for all types of
pairings, except SSP. The pairing req/rsp information is
passed as a parameter so the application can decide
wheter to accept or reject the pairing.
Fixes: #21036
Signed-off-by: Martin Rieva <mrrv@demant.com>
Corrected improper return value description of
settings_runtime_get().
Added return value description to each of settings handler
description.
Include run-time API into doxygen build.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
When building with Kconfig a symbol CONFIG_FOO is either undefined, or
defined to the integer literal 1. There are styles and use cases
where this is important, e.g. using "#if (CONFIG_FOO - 0)" which would
not work with a macro expanding to the identifier y. Use the standard
default definition instead of a special non-default one.
Also consistently use space rather than tab indentation within the
multi-line setting, and alphabetize the CONFIG_ predefines.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Make remote features and remote version accesible to the application
through the bt_conn_get_remote_info object. The host will auto initiate
the procedures. If the procedures have not finished with the application
calls bt_conn_get_remote_info then EBUSY will be returned.
The procedures should finish during the first 10 connection intervals.
Signed-off-by: Sverre Storvold <Sverre.Storvold@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There is no code to handle __syscall_inline so it is better removing
it from doxygen and checkpatch.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Adds the model extension concept to the access layer, as described in
the Mesh Profile Specification, Section 2.3.6. Extensions are
implemented as a tree, using two pointers in each model:
The extends pointer points to the first extended model, and the next
pointer points to the next sibling or (if the NEXT_IS_PARENT flag is
set) the parent model in the tree, forming a cyclical "Left-child
right-sibling" (LCRS) tree. The tree root can be obtained by calling
bt_mesh_model_root_get(), and the extended models can be walked by
calling bt_mesh_model_tree_walk().
According to the Mesh Profile Specification Section 4.2.3, all models in
the same extension tree share one subscription list per element. This is
implemented by walking the model's extension tree, and pooling the
subscription lists of all models in the same element into one. If the
config server adds a subscription to a model, it may be stored in any of
the model tree's models' subscription lists. No two models in the same
extension tree and element will have duplicate groups listed. This
allows us to increase extended models' capacity for subscriptions
significantly.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Flash page layout API was omitted by documentation as it
is optional.
Added tag which turn it on to doxygen setup which allows
to include missing API documentation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Clean up the INPUT paths for doxygen scanning:
- directory scans include sub-directories so no need
to include them explicitly
- remove excluded (legacy) includes that no longer exist
Sync directory changes in the CMakeLists.txt (as noted in the comments)
Add content to the home page of the doxygen-generated HTML, and add a
Zephyr branding theme.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fixes: #6773
Folks found the use of @rststar/@endrststar non-intuitive (wanted to use
@rststart). The "star" was there indicating the doxygen comment lines
had a leading asterisk that needed to be stripped, but since our
commenting convention is to use the leading asterisk on continuation
lines, the leading asterisk is always there. So, change the doxygen
alias to the more expected @rst/@endrst.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Enable generation of doxygen documentation for kernel APIs that are
behind Kconfig options and add a note about the option needed to enable
the APIs.
Enable both CONFIG_SCHED_CPU_MASK and CONFIG_SCHED_DEADLINE in doxygen
config file.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move test related code and the testsuite away from tests/ and make it a
proper subsystem.
The way tests were integrate in the tree was not obvious and actual
tests were intermixed with the testsuite code.
This will allow us to have trees with the testcode and without the
samples by just remove the folders tests/ and samples, needed for
isolating actual code from test/sample code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use file(GLOB_RECURSE ...) to generate a superset of doxygen input
files. Use this list as a dependency for a new empty file
doc/_build/last_doxy_run_tstamp.
The incremental build time to re-run "make htmldocs-fast" after a small
.rst doc change is brought down from from ~8s to ~4s on my Linux system
and from ~30s to less than 10s on my MacBook.
(Doxygen changes are still slow for a couple reasons recently isolated
and documented in doc/CMakeLists.txt)
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Use a variable to set the doxygen output directory so we can refer to it
later when fixing mtimes instead of hardcoding it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
CMSIS RTOS API provides a generic RTOS interface for embedded
processors (actually for Cortex-M processors but are generic
enough to be used elsewhere). This header file is for V2 version.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Fix references in doxygen comments and enable util.h which has
documentation for references macros in log_core.h
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CoAP library is migrated to support over socket based
applications or other higher layer protocols. Most of the
API's and functionality is kept as it is except few changes.
net_pkt/net_buf is removed from CoAP library. Now it expects
a pre-allocated flat buffer and length. If there is not enough
space to append any data, library simply returns an error.
It's user's responsibility to allocate and free memory.
One change in functionality is, earlier coap_pending_clear()
used to clear the memory, but now it's user's responsibility
to free the memory.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
PR #10216 hit a doxygen/breathe known issue that is worked around by
adding an entry to the doxygen configuration to treat BUILD_ASSERT() as
a predefined macro.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CMSIS RTOS API provides a generic RTOS interface for embedded
processors (actually for Cortex-M processors but are generic
enough to be used elsewhere). This header file is for V1 version.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Similar to #8042, doxygen has issues with function macros (those that
don't end with a semicolon). Workaround is to have doxygen treat these
as predefined by the doxygen preprocessor. Fixes a problem showing up
in PR #9140.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The following changes have been made to support out-of-tree builds:
* In order to avoid using relative hardcoded paths, use CMake's
configure_file() to replace the paths in the doxygen input file
so that the output directory is set correctly.
* All .rst and additional required files are now copied from the doc/
folder into the build/rst folder using extract_content.py. The
samples/ and boards/ folder are copied twice (once into build/rst
and another into build/doc/rst) to manage relative paths.
* All paths are absolute where possible, including themes and static
content.
This patch ensures that the Zephyr repo is not contaminated by the
build at all.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
