Added record for describing change of write-block-size
to 32-bits introduced by #19720.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The SoC, driver, and board support for the CC2650 and CC2650 Sensortag
aren't currently supported and we are removing them as such. If anyone
is interesting in supporting this platform we can easily recovery it
from git.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Encoding of values with use of base64 has been marked as deprecated and
will be removed in future releases.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add the relevant sections for Stable API Changes so that the release
notes can be populated during development.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The network sample automatic testing feature in PR #19677 is moved
to 2.2 so removing it from 2.1 release note.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Documents major driver changes (additions, removals, fixes, etc.) across
all driver families since the 2.0.0 release.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add a note about supporting new SoC Series in v2.1.0 release.
Style rework in the section for SoC support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding a release notes section for the ARM Cortex-M
architecture, to be part of the Zephyr v2.1.0 release notes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Note that generated_dts_board.conf is now deprecated and that users
should utilize functions to access DT related information that was
coming from generated_dts_board.conf.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For a long time, release notes were titled "Zephyr Kernel x.x.x". With
the 2.0 release the title was changed to "Zephyr RTOS 2.0.0" and for the
1.14.1 update the title was "Zephyr 1.14.1" and for the 2.1.0 working
draft the title went back to "Zephyr Kernel 2.1.0". The end result was
the release notes index looking like this:
Zephyr Kernel 2.1.0 (Working Draft)
Zephyr RTOS 2.0.0
Zephyr 1.14.1
Zephyr Kernel 1.14.0
Zephyr Kernel 1.13.0
Zephyr Kernel 1.12.0
Zephyr Kernel 1.11.0
I think the intention was to drop the "Kernel" name (since the release
is more than a kernel), so let's make the release notes titles
consistent by calling post 1.14.0 release notes "Zephyr x.x.x"
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Added in 2.0, along with some binding format simplifications in 2.1.
Bunch of other stuff that could be mentioned, but keep it relatively
short.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use globbing to find release notes and display them in the expected
reverse-sorted order (newest release first). Some trickery is needed
because were not using two-digit version/subversion numbers so the list
won't sort naturally. This will eliminate the need to edit the index
page on every release, until we get to subversion 10.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
For long lists of items, it's better to use a multi-column display to
make better use of the screen space. We used the hlist directive to
accomplish list, but it has a drawback on small (phone) screens because
under the hood, the rendering is done using tables.
Instead, we can take advantage of built-in CSS multi-column support
available in recent browsers. So, convert uses of the hlist directive
to use an rst-class directive to apply a multi-column class to
the entity. The chosen column-width (18em) gives us a 3-column display
on typical window sizes, but will adjust to more or fewer columns
depending on the actual real estate available.
Also, update the documentation guidelines to mention this change.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Get things started for Zephyr 2.1 release notes.
Individual PRs will update their appropriate sections.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Zephyr is more than a kernel, so we update the title of
the release notes' section accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The project's README.rst references the support board docs with an URL
that's not working these days (see
https://github.com/zephyrproject-rtos/infrastructure/issues/134) so fix
that URL reference. While looking for other similar linking cases, I
found a hard URL references that should be using :ref: role, and a
release notes reference to a (now) broken link (fixing that in the
/latest/ version of the 1.10 release notes).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Do a review and editor pass on the release notes, reduce length of some
lists by using hlist extension, tweak css for appearance of hlist in a
bullet list. Update entries to be in past tense (Added vs. Add).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Adding a note about new tests and expanded
test case list for 2.0.0 release notes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Not a whole ton to say at the high level: many of the changes have
been discussed in notes for drivers and other subsystems.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Add a summary of 2.0 doc changes, and fix a misspelling.
Also, add the 2.0 release notes to the index page.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Documents major driver changes (additions, removals, fixes, etc.) across
all driver families since the 1.14.0 release.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Get things started for Zephyr 2.0 release notes.
Individual teams will update their appropriate sections.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to a new guide which will expand on how to submit modules and how
to maintain them.
Also move topology documentation to repository management section where
it fits better.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Clean up accumulated release notes with (final) clarity edits, spell
check, and such. Remove "Working Draft" from the heading.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Added information to release notes about Zephyr modules which allow for
splitting ext/ into multi-repo instead using Zephyr modules.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Added release notes for 1.14 release.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the relevant release notes for the documentation improvement
for version 1.14.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added information to the release notes about the new drivers
in native_posix, the new nrf52_bsim board and the BabbleSim
integration in CI and testcases.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Update 1.14 draft release notes with doc changes. Also edited existing
release notes material to make sentence tense consistent (past tense).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the release notes page to include the 1.14 release notes
(currently a draft in progress), and update the main index page to
clarify how to get to documentation for other Zephyr versions.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch adds information about the security vulnerabilities being
fixed in the 1.14 release.
Add a intro statement that these issues were addressed,
and include x86 vulnerabilities addressed in this release.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This is a revert of 45a4fbf2ae and
this commit removes the offending function references from
Networking chapter in 1.14 release note. After the BSD socket
documentation adds the function references we can revisit the
release note and add back the function references.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Get things started for the 1.4 release notes.
Individual teams will update their appropriate sections.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
