Some of this information is stale and needs to be fixed.
Try to make a few other things clearer while we're here.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Document why and how we use the devicetree nexus map properties to
preserve devicetree flag specifications.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
found some references to files (via :zephyr_file: and :zephyr-app:) that
were moved, so the links were broken
Fixes: #19660
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
DTSpec writes this as a single word, presumably to make it easier to
grep for / more precise. Follow along in the rest of the docs now that
our main DT docs page agrees with this usage.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The K6X example is part of the wrong subsection (devicetree vs
kconfig) currently. Move it up to the right place (the section which
was recently renamed to "input and output files")
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Re-work the introductory sections of the devicetree documentation,
adding several figures and cross-references to other useful parts of
the documentation.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Device tree overlays are a bit of a stumbling block. Try to add more
cross-references and examples for how to use them to the application
development doc and the west build page.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
It is now possible to override a shield variant configuration
for a specific board. Get it documented.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Shields subsystem provides the possibility to override configuration
for boards and to define variants.
Reflect this in documentation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Give an example for an interrupt controller, where 'interrupt-cells'
should be used instead.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This PR adds the possibility to specify ZEPHYR_EXTRA_MODULES from an
environmental variable. To add a custom module mymodule in
path/mymodule the variable ZEPHYR_EXTRA_MODULES can be set in
`.zephyrrc` as `export ZEPHYR_EXTRA_MODULES=path/mymodule`.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Remove ctf_middle layer and have only ctf_top and ctf_bottom.
Port functionality from ctf_middle to ctf_top and remove
ctf_middle.h file. Update associated documentation.
Signed-off-by: Mrinal Sen <msen@oticon.com>
Added in 2.0, along with some binding format simplifications in 2.1.
Bunch of other stuff that could be mentioned, but keep it relatively
short.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
While the two-column layout looked OK in the HTML output, it totally
broke the PDF version of the documentation. So, this change puts the
picture before the text instead of using embedded raw html tags to
create a two-column look. (And fixes the PDF generated output.)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
For long lists of items, it's better to use a multi-column display to
make better use of the screen space. We used the hlist directive to
accomplish list, but it has a drawback on small (phone) screens because
under the hood, the rendering is done using tables.
Instead, we can take advantage of built-in CSS multi-column support
available in recent browsers. So, convert uses of the hlist directive
to use an rst-class directive to apply a multi-column class to
the entity. The chosen column-width (18em) gives us a 3-column display
on typical window sizes, but will adjust to more or fewer columns
depending on the actual real estate available.
Also, update the documentation guidelines to mention this change.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A Kconfig boolean is added to allow users to provide their own
output strings when running tests via ztest.
This allows changing e.g. the PASS/FAIL/SKIPPED strings,
add counters, change separators, and similar.
A test using the feature and relevant documentation is added.
Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no>
Instead of
properties:
compatible:
constraint: "foo"
, just have
compatible: "foo"
at the top level of the binding.
For backwards compatibility, the old 'properties: compatible: ...' form
is still accepted for now, and is treated the same as a single-element
'compatible:'.
The old syntax was inspired by dt-schema (though it isn't
dt-schema-compatible), which is in turn a thin wrapper around
json-schema (the idea is to transform .dts files into YAML and then
verify them).
Maybe the idea was to gradually switch the syntax over to dt-schema and
then be able to use unmodified dt-schema bindings, but dt-schema is
really a different kind of tool (a completely standalone linter), and
works very differently from our stuff (see schemas/dt-core.yaml in the
dt-schema repo to get an idea of just how differently).
Better to keep it simple.
This commit also piggybacks some clarifications to the binding template
re. '#cells:'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Re-word the support block for LwM2M:
- the supported interfaces
- change wording of supported LwM2M objects to include the "required"
keyword instead of explicitly listing them
- mention several IPSO Smart Objects
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16327
Signed-off-by: Michael Scott <mike@foundries.io>
While trying out the hello_world sample built for QEMU, I was expecting
the sample app to exit and I'd return to a command prompt. Nope. You
need to exit QEMU manually, so add that step to the sample instructions.
Looking around, there are more uses of QEMU like this that could use
this added step after running the sample app.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
West v0.6.1 has been released. The main feature is that "west update"
now avoids communicating with the network by default when project
revisions have already been fetched.
This allows for offline operation and significantly speeds up the
command (it's 10 times faster on my machine and home network).
There are other miscellaneous changes as well; document them also.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Instead of having a mix of west and CMake/ninja instructions for
building and flashing, document it using only west. This will help
clarify that west is the default build tool in Zephyr and should also
reduce confusion over what tool to use.
Note that the biggest change is changing the default in
doc/extensions/zephyr/application.py for :tool:, from all to west.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
west completion is an extension command, and therefore requires the user
to be in a zephyr installation in order to be available.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The old link seems not to work anymore, so instead replace it with an
invitation link freshly generated.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The main change is the elimination of the bootstrapper, a design flaw
/ misfeature.
Update the documentation to be compatible with the 0.6.x releases as
well. This has to be done atomically, as there were incompatible
changes. Make use of the versionchanged and versionadded directives
to begin keeping track of how these APIs are evolving.
(Note that west 0.6.0 will remain compatible with the extension
commands in Zephyr v1.14 LTS as long as that is still alive. This
change is targeted towards Zephyr 2.0 users.)
This requires a bump in the shippable container and allows us to
simplify the west_commands test procedure.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Now that the runners package no longer depends on west, we can move
the documentation for it from the orphan west-apis.rst page to the
build-flash-debug.rst page that documents the west extension commands
which use that package.
(This is a more logical place for this information, but it was
previously not possible to put it there since we must be able to build
the documentation on a system without west installed, excepting
content in west-apis.rst. Removing the dependency means the runners
automodule directive can safely appear in build-flash-debug.rst.)
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
- Explain what it means to enable nodes (and for a node to be disabled)
with some sample code from the .dts(i) files
- Explain the '&foo { ... }' syntax
- Linkify files with :zephyr_path:
- Simplify and shorten wording a bit
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add some information that would've saved me a lot of time:
- Give an overview of how device tree nodes and bindings fit together,
with examples. Assume people might be coming at it without knowing
anything about device tree.
- Explain how 'inherits' works in more detail
- Explain what 'parent/child: bus: ...' does more concretely, and what
problem it solves
- Add more examples to show what things look like in the .dts file
- Clean up the language a bit and make things more consistent
Also fix some errors, like 'properties: compatible: ...' being wrong
(missing 'constraint:' and compatible strings in the wrong place).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The documentation that describes how Python and pip interact with the OS
when installing packages used to be under a common section, and was
moved to the west bootstrap one later on. Since this information is
required early on (for example on Linux when installing CMake via pip3),
move the info to its own section and link to it from others.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
* z_NanoFatalErrorHandler() is now moved to common kernel code
and renamed z_fatal_error(). Arches dump arch-specific info
before calling.
* z_SysFatalErrorHandler() is now moved to common kernel code
and renamed k_sys_fatal_error_handler(). It is now much simpler;
the default policy is simply to lock interrupts and halt the system.
If an implementation of this function returns, then the currently
running thread is aborted.
* New arch-specific APIs introduced:
- z_arch_system_halt() simply powers off or halts the system.
* We now have a standard set of fatal exception reason codes,
namespaced under K_ERR_*
* CONFIG_SIMPLE_FATAL_ERROR_HANDLER deleted
* LOG_PANIC() calls moved to k_sys_fatal_error_handler()
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This patch updates the GAP ICS to 7.4.1.
It updates the Bluetooth Spec to 5.1 and added missing ICS tables.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
There are a few reasons why sanitycheck will only build a test and not
run it: list them in the developer guide. Also lists the --options that
provide that information and update their --help message.
A couple other --help fixes.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert DT_.*_GPIO_{CONTROLLER,PIN,FLAGS} ->
DT_.*_GPIOS_{CONTROLLER,PIN,FLAGS)
Used the following commands to make these conversions:
git grep -l DT_.*_GPIO_CONTROLLER | xargs sed -i 's/DT_\(.*\)_GPIO_CONTROLLER/DT_\1_GPIOS_CONTROLLER/g'
git grep -l DT_.*_GPIO_PIN | xargs sed -i 's/DT_\(.*\)_GPIO_PIN/DT_\1_GPIOS_PIN/g'
git grep -l DT_.*_GPIO_FLAGS | xargs sed -i 's/DT_\(.*\)_GPIO_FLAGS/DT_\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When using a build folder format with build.dir-fmt that includes any
parameters that need resolving, the west runners cannot find the folder
since the required information (board, source dir or app) is not
available.
Add a very simple heuristic to support the case where a build folder
starts with a hardcoded prefix (for example 'build/') and a single build
is present under that prefix.
The heuristic is gated behind a new configuration option:
build.guess-dir
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The Quark D2000 is the only x86 with an MVIC, and since support for
it has been dropped, the interrupt controller is orphaned. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The zephyr-file role creates a link to the GitHub copy of a file. Some
files have been moved so update the file references in the documentation
(found by scanning for uses of :zephyr-file:)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix misspellings and doc issues missed during regular reviews (including
some files without a trailing newline)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Clean up some stray references to cmake in doc, boards and
samples that don't make explicit use of the zephyr app extension,
as well as other minor doc fixes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There are a few different places where alternatives for setting
environment variables are described. None of them is 100% complete, so
the results are likely to be confusing.
Make a single page on setting environment variables, how the zephyrrc
files work, how the zephyr-env scripts work, and some of the important
environment variables, with appropriate references elsewhere. (This is
inspired by the Arch wiki's excellent page on installing programs.)
Link to it from the getting started and application development pages
instead of repeating the information. This has the benefit of
shortening the getting started guide a bit more.
Add some concrete advice on checking the toolchain environment
variables in particular. This is a stumbling block for beginners.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add the possibility of configuring the build folder format in west's
configuration system.
The build.dir-fmt configuration option controls how west will create
build folders when not specified, the following parameters are currently
accepted:
- board: The board name
- source_dir: The relative path from CWD to the source directory
- app: The name of the source directory
If CWD is below source_dir in the directory hierarchy then source_dir is
set to an empty string.
This means that if one sets:
[build]
dir-fmt = build/{board}/{source_dir}
Then when building samples/hello_world from zephyr's root for the
reel_board the build folder will be:
./build/reel_board/samples/hello_world
but when building it from inside the samples/hello_world folder it will
instead be:
./build/reel_board
Fixes https://github.com/zephyrproject-rtos/west/issues/124
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This had numerous problems, but should now be working
end-to-end and produce correct reports with gcovr 4.1.
Use of sanitycheck is now much clearer.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Documentation updated, added reference to the latest
LPClink2 firmware, default provided firmware may not
work on latest boards (e.g. LPC55xx).
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Like for other choices, it's the prompt that gets displayed within the
parentheses, not the symbol name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Takes a while to figure out what it's there for, so explain what it does
and give an example of a good use for it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move to a new guide which will expand on how to submit modules and how
to maintain them.
Also move topology documentation to repository management section where
it fits better.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The current order makes no sense. Move it earlier in the order, so the
catch-all page appears last.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Grammar and formatting improvements, as well as changes requested in
review that weren't made (in particular, the ones recommending using
"pip3 show -f west" to see where west is installed instead of listing
common places that might not be right.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Create a new dedicated section for west installation that details
some of the finer aspects of the process and steps involved.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a completion command that dumps the contents of a shell
completion file present in the zephyr repository.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The west build --help output no longer fits in a single page. Move
details and examples into the documentation, so the -h output doesn't
require scrolling around.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This can be used to override the default CMake generator
permanently. Its values are the same as those acceptable to cmake's -G
option.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Try to make the language simpler. Introduce each example with a
paragraph that says "To <DO XYZ>" to make them easier to find.
Move the config options to the documentation for that command to make
them easier to find.
Add some more examples for use cases we've gotten questions about.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
- Respect the BOARD environment setting.
- Don't require --force if the board can't be figured out: it might be
set in CMakeLists.txt, for example. Instead, downgrade to a warning
which can be disabled with "west config build.board_warn false".
- Add a build.board configuration option used as a final BOARD fallback
after CACHED_BOARD (in the CMake cache), --board (command line), and
BOARD (environment).
- Keep the config docs up to date.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a new "boards" command that is able to list all the boards in the
upstream tree. There is currently no support for out-of-tree boards.
The command executes cmake to use the built-in CMake script,
boards.cmake, to list the boards, and then stores the information
retrieved and allows the user to present it in a user-definable format.
Fixes https://github.com/zephyrproject-rtos/west/issues/53
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The previous mcuboot reference didn't make sense - it linked to
itself. Linking to the official website should be more useful.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
When making a build folder pristine until now we were running the
'pristine' build target. The issue with that is that ninja/make or
whatever build tool is being used might decide to re-run CMake itself if
some of the dependencies have changes. This might trigger an error that
is unfriendly and unnecessary, since the user is explicitly asking for
the build folder to be wiped before starting a fresh build.
To avoid this issue restor to running directly the CMake script that the
'pristine' build target itself uses, so as to make sure that the build
folder is wiped unconditionally regardless of changes made to the tree.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
I often wish I had a short and Zephyr-specific place to point people
to when they're asking for help in ways that make it hard to help
them.
Add one.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a new command-line and build config option, `pristine`, that the
user can pass to `west build` or set in its configuration file(s) in
order to automatically trigger a pristine build on every build or
whenever west considers it required.
The option can take the following values:
- never: Never run the target
- always: Always run the pristine target before building
- auto: Run the pristine target when required
With `auto`, the pristine target will be run when running
west with an existing build folder containing a build system and:
- Selecting a different board from the one currently in the build system
- Selecting a different application from the one currently in the build
system
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
All docs should have a label at the top that would
permit cross-document linking via :ref:`labelname`.
Update "testing" label that would have conflicted and fix the only
reference to the old "testing" label in development process
documentation.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
tinycrypt documentation wasn't included in the table of contents so add
it into the guides section.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit extends existing documentation by providing an example
of how to build Hello World sample application for MCUboot using
west.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a missing reference to how west is used to set ZEPHYR_MODULES in
without-west.rst, augmenting the application development guide a bit
to include this in the list of important variables, cleaning that up a
bit while we are here and adding some more west details.
Add a big fat warning in the getting started guide that using Zephyr
without west is not for the faint of heart.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a note to mention how to get openocd working on windows.
This is taken from stlink-v21.rst file before its reformatting.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This page has been replaced by doc/guides/debugging/probes.rst and
doc/guides/debugging/host-tools.rst
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Zephyr boards use a wide range of debug probes and debug host tools that
can often be confusing to users. Introduce a new debugging guide that
documents all the different variations of debug probes and host tools in
one place, including which combinations are valid.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
- add glossary terms for important concepts we have to explain often,
like "west installation"
- add autodoc directives for pulling in west API docs
- add missing documentation for built-in features like west's
configuration, extension commands, etc.
- add missing documentation for "west sign" extension
- describe the manifest in a self-contained way rather than linking to
the relevant pykwalify schema, also adding a missing reference to
"west manifest" in the miscellaneous multi-repo commands list
- move various details regarding history and motivation to why.rst
among other changes to repo-tool.rst, leaving it closer to a "tell
me what I really need to know" style overview
- update planned features
Fixes: #14992
Signed-off-by: Marti Bolivar <marti@foundries.io>
1. The build paragraph was listed with the run option.
But, we need to pass an argument to the native_posix board,
so "ninja run" alone is not good enough.
Plus, it was not coherent with the rest of the text, as
the paragraph intended to tell people how to build.
2. Added "sudo" to the run line, as the user needs extra
permissions to connect to a host BT controller.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Move the original documentation in the arduino_101 board to a common
section in the Bluetooth documentation and document the use of `btmon`
in general.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added some more content to the section about how to simulate
with BabbleSim and a couple of extra links.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fixes a typo in board_porting.rst
Fixes wrong syntax for file markup element
in build-flash-debug.rst
Signed-off-by: Suryansh Sharma <suryansh@evilscientist.cc>
User mode-related API functions have been renamed to use the
'z_' prefix, so we need to update the architecture porting
guide accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add initial sections for the Bluetooth host stack, as well as a simple
diagram of the various protocol & profile layers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Overhaul the Bluetooth documentation to split it into manageable units
and include additional information, such as architecture and tooling.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Some people never use the menuconfig, but it makes a good sanity check
when making Kconfig changes, so encourage it for that. Mention a few
things that can be checked in it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a section on how 'if' works to the 'Kconfig - Tips and Best
Practices' page, especially when combined with 'source'.
There seems to have been some confusion here that lead to a bunch of
duplicated dependencies. It's probably simpler than most people assume.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The architecture document contained old information and is now
updated to match the reality.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In order to simplify the usage of `west build`, take a positional
argument with the source directory instead of requiring the `-s,
--source-dir` flag. This makes it easier and quicker to invoke west when
building, as well as being consistent with CMake.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There is no symbol called CONFIG_SRAM. Mention CONFIG_SRAM_SIZE and
CONFIG_SRAM_BASE_ADDRESS instead, and also mention that the DT_* values
they're generated from.
This gets rid of a false-positive undefined Kconfig symbol reference
too.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_ADC_QMSI_SAMPLE_WIDTH was removed in commit acc40d990a ("adc:
remove adc_qmsi driver"). It's only used as an example in the
documentation, but might as well use an existing symbol instead.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a missing semicolon after /dts-v1/, and a blank line between
/dts-v1/ and the root node.
Use 'code-block:: none' instead of 'code-block:: yaml' as well.
DTS is not YAML.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The connectivity API will now point to BSD socket API instead
of legacy connectivity API (net_context.h) when creating
a network application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to show
* native_posix board setup (native_posix_setup.rst)
* QEMU Ethernet setup (qemu_eth_setup.rst)
* QEMU SLIP setup (qemu_setup.rst)
* USBNET setup (usbnet_setup.rst)
in main network index as links to those chapters are already
found in "Networking with the host system"
(networking_with_host.rst) chapter. In order not to trigger
a doxygen warning, place the chapters into hidden toctree.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added more detailed information how to connect Zephyr instance
to host system like Linux desktop.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The documentation shows the steps to be followed for generating the
code coverage reports.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Update dts documentation.
Rework some parts to provide more clarity and elaborate
yaml bindings usage.
Fixes#10318
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Documentation for kconfigfunctions, mentions they look up elements
in "the DTS generated "conf" style database". This indication
could be cryptic for new zephyr users. Adding the exact name and
path of the file for disambiguation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Document the `west build` command in the section corresponding to the
west commands that deal with the CMake cache, which is now named
"Building, flashing and debugging" for consistency.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Clarify the docs for dt_str_val that if the name isn't found we return
and empty string. Also cleanup the code slightly as we don't need to
escape the double quote.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace generating CONFIG_ symbols with DT_ symbols for chosen
properties like 'zephyr,console' or 'zephyr,bt-mon-uart'. We now use a
kconfigfunctions (dt_str_val) to extract the info from dts into Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since we know do DTS before Kconfig we should try and remove dts from
creating Kconfig namespaced symbols and leave that to Kconfig. So
rename CONFIG_CCM_<FOO> to DT_CCM_<FOO>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move guides and APIs into separate directories and cleanup naming
introducing index files rather than named section files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
