The optional SOC_CONTEXT carries processor state registers that need to
be initialized properly to avoid uninitialized memory read as processor
state.
In particular on the RV32M1 the extra soc context stores a state for
special loop instructions, and loading non zero values will have the
core assume it is in a loop.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Adds handling of the FLOAT_64BIT option when determining the ISA
flags as well as introduces a new Kconfig option to enable/disable
the hard-float calling convention.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
This change adds full shared floating point support for the RISCV
architecture with minimal impact on threads with floating point
support not enabled.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
This operation is formally defined as rounding down a potential
stack pointer value to meet CPU and ABI requirments.
This was previously defined ad-hoc as STACK_ROUND_DOWN().
A new architecture constant ARCH_STACK_PTR_ALIGN is added.
Z_STACK_PTR_ALIGN() is defined in terms of it. This used to
be inconsistently specified as STACK_ALIGN or STACK_PTR_ALIGN;
in the latter case, STACK_ALIGN meant something else, typically
a required alignment for the base of a stack buffer.
STACK_ROUND_UP() only used in practice by Risc-V, delete
elsewhere.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel z_setup_new_thread() calls into arch_new_thread(),
which calls back into the core kernel via z_new_thread_init().
Move everything that doesn't have to be in z_new_thread_init() to
z_setup_new_thread() and convert to an inline function.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In arch_irq_connect_dynamic the 'level' variable is only used on
platforms that define CONFIG_RISCV_HAS_PLIC. For the other platforms
we'll get a warning about an unused variable. Remove the need for
'level' and just call irq_get_level() where its needed to address the
issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
z_isr_install is not suited to handle multi-level interrupt formats.
This update allows z_isr_install to accept irq numbers in zephyr format
and place them in the isr table appropriately.
Fixes issue #22145
Signed-off-by: Jaron Kelleher <jkelleher@fb.com>
The mabi and march options of the compiler and linker commands
were previously hardcoded and depended only on the 64BIT config
option. This update allows these flags to be set by the config
options currently available, plus an additional option to
specify the compressed ISA.
Signed-off-by: Jaron Kelleher <jkelleher@fb.com>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add TRACING_ISR Kconfig to help high latency backend working well.
Currently the ISR tracing hook function is put at the begining and
ending of ISR wrapper, when there is ISR needed in the tracing path
(especially tracing backend), it will cause tracing buffer easily
be exhausted if async tracing method enabled. Also it will increase
system latency if all the ISRs are traced. So add TRACING_ISR to
enable/disable ISR tracing here. Later a filter out mechanism based
on irq number will be added.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
This is no longer needed, since all in-tree platforms are only using
the standard mstatus formats. Remove it to avoid the complexity.
Signed-off-by: Olof Johansson <olof@lixom.net>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When compiling the components under the arch directory, the compiler
include paths for arch and kernel private headers need to be specified.
This was previously done by adding 'zephyr_library_include_directories'
to CMakeLists.txt file for every component under the arch directory,
and this resulted in a significant amount of duplicate code.
This commit uses the CMake 'include_directories' command in the root
CMakeLists.txt to simplify specification of the private header include
paths for all the arch components.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a common definition for NUM_IRQS in arch/arm/core/Kconfig and
arch/riscv/Kconfig. That way, the type doesn't have to be given for
NUM_IRQS in all the Kconfig.defconfig files.
Trying to get rid of unnecessary "full" symbol definitions in
Kconfig.defconfig files, to make the organization clearer. It can also
help with finding unused symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is an optional feature and no logic for it should
be present unless CONFIG_IRQ_OFFLOAD is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
include/sys/arch_inlines.h will contain all architecture APIs
that are used by public inline functions and macros,
with implementations deriving from include/arch/cpu.h.
kernel/include/arch_interface.h will contain everything
else, with implementations deriving from
arch/*/include/kernel_arch_func.h.
Instances of duplicate documentation for these APIs have been
removed; implementation details have been left in place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This makes it clearer that this is an API that is expected
to be implemented at the architecture level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_set_thread_return_value is part of the core kernel -> arch
interface and has been renamed to z_arch_thread_return_value_set.
z_set_thread_return_value_with_data renamed to
z_thread_return_value_set_with_data for consistency.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and is appropriately renamed z_arch_is_in_isr().
References from test cases changed to k_is_in_isr().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and should have a leading prefix z_arch_.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
SR and LR were used as global names for load and store RISC-V assembler
operations, colliding with other uses such as SR for STATUS REGISTER in
some peripherals. Renamed them to a longer more specific name to avoid
the collision.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
For now we enforce the medany code model for 64-bit builds as we get
reloc issues otherwise. The instruction set and ABI are also set to
soft-float usage.
The ilp32 ABI is explicitly specified on 32-bit build to make sure
it is not using a wrong default if the same toolchain is used for both
32- and 64-bit builds. The archittecture options are the same as the
SDK's riscv32 toolchain default in that case.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
There are two aspects to this: CPU registers are twice as big, and the
load and store instructions must use the 'd' suffix instead of the 'w'
one. To abstract register differences, we simply use a ulong_t instead
of u32_t given that RISC-V is either ILP32 or LP64. And the relevant
lw/sw instructions are replaced by LR/SR (load/store register) that get
defined as either lw/sw or ld/sd. Finally a few constants to deal with
register offsets are also provided.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
