The function _IsInIsr computes a Boolean value but the function
returns a integer value. Fix the return type of the function.
This makes the zephyr api _is_in_isr() return a boolean type.
Thereby making it consistent across all the architectures.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Instead of checking every time we hit the low-level context switch
path to see if the new thread has a "partner" with which it needs to
share time, just run the slice timer always and reset it from the
scheduler at the points where it has already decided a switch needs to
happen. In TICKLESS_KERNEL situations, we pay the cost of extra timer
interrupts at ~10Hz or whatever, which is low (note also that this
kind of regular wakeup architecture is required on SMP anyway so the
scheduler can "notice" threads scheduled by other CPUs). Advantages:
1. Much simpler logic. Significantly smaller code. No variance or
dependence on tickless modes or timer driver (beyond setting a
simple timeout).
2. No arch-specific assembly integration with _Swap() needed
3. Better performance on many workloads, as the accounting now happens
at most once per timer interrupt (~5 Hz) and true rescheduling and
not on every unrelated context switch and interrupt return.
4. It's SMP-safe. The previous scheme kept the slice ticks as a
global variable, which was an unnoticed bug.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Before entering userspace, the MPU stack guard is
configured to guard the default (i.e. afterwards, the "user")
thread stack, as the privileged stack has not yet been set. Upon
entering userspace the MPU stack guard needs to be re-programmed
to the privileged stack, otherwise, there is a risk that the
first system call might be serviced without privileged stack
protection, if it occurs before any context-switch. This commit
fixes this issue, by calling configure_mpu_stack_guard(..) upon
userspace entering.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
MISRA-C requires that all declarations of a specific function, or
object, use the same names and type qualifiers.
MISRA-C rule 8.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added LOG_PANIC to fault handlers to ensure that log is flush and
logger processes messages in a blocking way in fault handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove the inclusion of <string.h>, if CONFIG_INIT_STACKS
is defined, because it is not required anywhere in thread.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Several style and typo fixes in inline comments of arm kernel
files and thread.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds an inline explanatory comment in the API
for setting the non-secure stack-pointer limit registers, to
stress that the API is only applicable to Mainline ARMv8-M MCUs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit fixes a minor bug by setting the error reason
(to, default, _NANO_ERR_HW_EXCEPTION) for errors detected
during Secure/Non-Secure stack inspection. Applicable only
to Secure firmware.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes all MPU-related (ARM_CORE_MPU and NXP_MPU)
options exept ARM_MPU, which becomes master switch controlling
MPU support on ARM.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit introduces CPU_HAS_ARM_MPU and CPU_HAS_NXP_MPU options,
which indicate which flavour of MPU is supported by given SoC family.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The __reset vector is using the 'b' instruction to jump to _PrepC. 'b'
can only jump 2KB on Cortex-M0 platforms so this causes build failures
when _PrepC happens to be too far away from __reset.
To resolve this we use 'bl' instead as it can jump two thousand times
further[0].
This can also be resolved by porting the reset vector to C or by
placing the _PrepC function in a dedicated section that the linker
places next to __reset.
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0489e/Cihfddaf.html
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The ARMv8-m Memory Protection Unit does not require MPU regions
to be power-of-two aligned and sized. This commit removes this
requirement when building for ARMv8-m MCUs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
__swap function was returning -EAGAIN in some case, though its return
value was declared as unsigned int.
This commit changes this function to return int since it can return a
negative value and its return was already been propagate as int.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
As far as possible SoC-specific code should be contained to it's
directory and core systems should not be referencing specific
SoCs. This keeps the common code clean and makes it easier to maintain
out-of-tree SoCs.
To this end we move CONFIG_SOC_TI_LM3S6965_QEMU's soft-reset related
code out of arch/arm/core/cortex_m and into arch/arm/soc/ti_lm3s6965.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rather than do that for each architecture, source SoC Kconfigs where the
code is maintained, under ZEPHYR_BASE/soc.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
UART pins (TX, RX, RTS, CTS) are now configured in DTS files.
RTS and CTS definitions are optional. If flow control is enabled
and RTS/CTS pins are not defined, then compiler will issue
an error message.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
A bootloader may leave primask or faultmask set, so clear them during
startup when we enable interrupts and switch to the main thread.
Previously we only cleared primask for architecture variants which don't
support basepri, but now we do it for all architecture variants.
Fixes a failure on mimxrt1050_evk with the latency_measure test and
shell_module sample when using an nxp internal bootloader.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This change adds DTS definition of SPI device for nRF chips.
It also removes SPI pin configuration from Kconfig and moves it to
chip DTS.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
This commit adds ADC nodes to DTS files for nRF SoCs and introduces
corresponding bindings for these nodes.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove I2C and SPI instances when enabling I2C_STM32 and
SPI_STM32 drivers.
It allows to enable the drivers if ports I2C_4, SPI_4,
SPI_5, SPI_6 are selected.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
One can enable I2C_3 in kconfig and set status = "ok" in dts, but
the driver expects to find the config as fixed up with this
addition.
Signed-off-by: Kiril Zyapkov <k.zyapkov@allterco.com>
The Cortex-M7 CPU included in the SAM e70 SoCs has instruction and data
caches that significantly boost the performances. Enable them during the
SoC initialization.
Fixes#8138
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
_k_syscall_table is an array of function pointers and is declared as
such in C sources, this makes it an STT_OBJECT[0] in the symbol
table. But when the same symbol is declared in assembly, it is
declared to be a function, which would make the symbol an STT_FUNC.
When linking with LTO this type inconsistency results in the warning:
real-ld: Warning: type of symbol `_k_syscall_table' changed from 2 to
1 in /tmp/cc84ofK0.ltrans8.ltrans.o
To fix this warning we declare the table with GDATA instead of GTEXT,
which will change the type from 'function' to 'object'.
[0]
https://docs.oracle.com/cd/E19455-01/816-0559/chapter6-79797/index.html
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The Cortex-M7 CPU included in the STM32F7 SoCs has instruction and data
caches that significantly boost the performances. Enable them during the
SoC initialization. Note that the D-cache should only be enabled if it
is disabled, to workaround CMSIS issue #331.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch changes clock initialization sequence to initialize external
cristal oscillators only if it was not done before. Initialization of
external cristal oscillators may be performed by the bootloader.
Tested on BRD4250B evaluation board.
Fixes#9471
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define generic interface and hooks for tracing to replace
kernel_event_logger and existing tracing facilities with something more
common.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds an __ASSERT line in _get_region_attr_by_type,
to signal an error if the supplied MPU region type is not valid.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds a UL suffix after numerical digits to ensure
the correctness of certain shift operations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit implements and integrates the ARMv8-M MPU driver
into the memory protection system for ARM.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors arm_mpu.c by moving all internal function
implementation that is specific to ARMv7-M architecture to a
separate internal header file. This allows to easily extend
arm_mpu.c to support ARMv8-M by including all ARMv8-M-specific
implementation in a similar internal header.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
