BOOT_MAGIC_SZ and BOOT_MAX_ALIGN were used in the header without
including bootutil/bootutil_public.h. This change remove the need of
the inclusion by making the dependency private.
Fixes#52095
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
Fix a bug in setting MAC address using net_if API, the API doesn't do a
memcpy but just stores the pointer and shell was passing stack pointer.
We can use dynamic allocation but freeing the memory for the MAC address
would be trickier, so, use the net management API and let the underlying
drivers figure out the MAC address memory management.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Add initial support for the nPM1100 EK. The EK is expected to be
connected to Arduino header pins (D2/3/4/5).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
While nPM1100 is to be operated in fixed configuration for some
applications, it has some degree of configuration via GPIOs. For
example, mode (auto/PWM) can be configured via MODE pin. VBUS current
can also be adjusted using ISET pin, even though there is no API yet to
limit the PMIC input current.
This patch adds a new regulator class driver for nPM1100 PMIC, so that
it can be used with the standard regulator API when needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is recommended that choices in Kconfig have names
so this commit adds missing one for the type of
host commands peripheral.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Adds an option to inform twister a testsuite should only be built and
run for platforms with unique sets of attributes. This enables
for example keying on unique (arch, simulation) platforms to run the test
suite on.
The most common usage may be test suites configured to run once per
(arch, simulation) pair as being enough. Additional information about
platforms may enable running a test once per hardware IP block or once
per soc family or soc avoiding duplicated effort in building and running
tests when once suffices.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
In file stm32l412.dtsi, spi2 was missing fifo compatibility,
this way failing to initialise fifo threshold correctly
when spi data width is configured.
Signed-off-by: Mirko Bottarelli <mirko.bottarelli@gmail.com>
There is special handling done for resolved addresses to convert
them to "regular" addresses for the upper layers.
This commits adds two helper functions to check if they are
resolved, and if so, then properly copied.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
We only expose random/public address types to the upper layers.
This is done by checking if the address type of events are
resolved addresses, and if so, then we translate them to
public/random.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The value in this bitfield is provided in the two's complement form,
so it requires special handling. Previously, it was read as just an
unsigned value and this could result in a wrongly computed CAPVALUE.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In some case, we may need to describe a domain clock for a device
while there is no way to configure it (ex: USB clock set on PLL_Q output
on F405 devices > It is not selectable).
Then, configuring a device clock domain in the clock_control driver
will allow to retrieve its subsys rate.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add rng definition to f410.
Though, don't inherit directly in f412 as it's integrated
in a different way.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to ease description of DCKCFG regsiters,
make f412 a variant of f410 as it supposed to be.
Only exception is missing DAC1.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
As we have to provide LL addresses in big endian to userspace to be
POSIX compliant and we also do not want to reserve extra space for
such addresses, bff6a5cce5 introduced
a change that swaps address bytes in place in the packet before
returning the packet with LL address pointers to userspace.
Unfortunately a regression sneaked into the code base while doing
so: The byte swapping was duplicated when using 6LoWPAN compression
and the byte swapping caused decryption to fail in some cases,
see #53630. This commit fixes the problem.
Fixes: #53630
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
The L2 networking layer checks for return value from enable, but
Ethernet is not checking and always returns 0, so, relay the return
value from the Ethernet driver to networking stack.
This fixes the issue of interface start failing but interface still
being up.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
This add storage abstraction to allow switch between different flash
APIs. This remove the erase command at updatehub core and move it to
storage init phase.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Currently MCUboot and system reset are invoked directly in the sample
applicatiion. This introduce 2 new methods to isolate system from
application.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Move header includes to source file. Currently firmware source files
have a hardcode partition identificator. This moves identificators
to updatehub core.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The CP app sends PD a "command" and the PD responds to it. Some times,
the PD has something that it wants to tell the PD which it does so in
response to POLL command. Both CP and PD apps need a way to exchange
these info over the OSDP bus. To archive this we will introduce what are
called "events" that allow the PD app to enqueue and CP app to get
notified.
This is analogous to the incumbent "commands" abstraction where, the CP
app enqueues a command and the PD app gets notified of it.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
For all commands and replies, the buffer length needed to build or the
length of data needed to decode needs to be checked and asserted. Right now
we do this by ad-hoc if-s. Add macros that do this at a common location.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
The raw, flags check has become a bit excessive and has begun to affect
code readability. Provide inline functions for those accesses that are
frequent. Also, get rid of `struct osdp_cp` as it can be fully represented
by `struct osdp` itself.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
CP has an array of PDs and pd->offset was the position of the PD in CP's
list. Since offset has many meanings, rename it to pd->idx.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Partial packets in the RX buffers cause the subsequent packet to be
treated as malformed. The RX buffer can have partial data if the sender
is too slow in sending the packet of if there is an interruption in
transmission mid-way.
To avoid any issues due to such partials, flush the uart channel before
sending the command/response.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
The log lines in CP and PD had a prefix such as "CP: " and "PD: " that
does not add too much value as a given device an either be CP or PD
only. This patch removes those and enhances some other log lines while
at it.
It also adds a enum for return values throughout the module to improve
code quality.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
The dai.h interface does not prohibit calling dai_config_get()
with different direction values. The dmic driver should handle
invalid direction value explicitly and not rely on an assert.
Link: https://github.com/thesofproject/sof/issues/6896
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Return specific fault reasons instead of the generic
`K_ERR_CPU_EXCEPTION`, which provides minimal debugging aid.
Fixes#53093.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Define the index where arch specific faults start. This is a specific
number to avoid arch specific fault values changing each time a new
generic fault is added.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This allows enum values to be referenced in architecture `arch.h` files
without circular dependencies.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
We want to be able to have platform or architecture extra configs
without having to duplicate a whole section of the test specification.
This adds support for namespacing of extra configs, for example:
arch:nios2:CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000
or
platform:qemu_x86:CONFIG_FOO=y
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use a flag to report a protocol error to the states. This keeps
state specific actions in the state. Currently, those state
specific actions are handled in the pe_report_error function.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Add CONFIG_USBC_CSM_SINK_ONLY=y to Sink's sample prj.conf.
This selects the Sink only Connection state machine
for the Sink sample and it explicitly show the user
of the Sink sample how the connection state machines are
selected.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>