The system crashed if an interrupt occurs before the
kernel event logger is initialized (Error seen on Galileo).
This patch adds a condition to check if the logger is ready
to operate.
Change-Id: I27d7cc31f386780725b0c47a9c92e9c064fc128a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change the configuration to enable the sleep events in
the nanokernel event logger sample.
Change-Id: Iea5bde06736b0499c8517de1549dee894a9db094
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
This patch remove the dependency of the ADVANCE_POWER_MANAGEMENT
for profiling sleep events that was supported only for microkernel.
Allowing us to also use this feature in nanokernel-only systems.
Change-Id: I1761eb6c4d72f477b419dfca5dc152b0fb69ee27
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The kernel event logger requires this function to obtain
the irq that is being processed, but this was not implemented
for mvic. This patch add this function to mvic.
Change-Id: I5e1b4a6e2758b69ec713c18ac9f78aebad18a93f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The option sleep event did not work without enabling
the context switch option. This patch fixes that error.
Change-Id: I2e44ddabb7ce190d3a2d5ccece10848f6c44cb48
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Set correct interrupt flags which are used with the console
handler.
Change-Id: I6a3a76826cedd0b4116f622701f2cb1161dd8adc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some systems are configured with CONFIG_MVIC which uses the same
call to create the stub.
Change-Id: I92f6657806159624dee9c271554a78bc76935613
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Set correct interrupt flags which are used with the console
handler.
Change-Id: I473a1fca6234ffb8d926457e8ccecfa29d1be6a5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Set correct interrupt values for this platform.
Change-Id: I97361b4420630e73bb8c8f812c943ee972cb8762
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds CONFIG_UART_NSIM to enable the uart/nsim driver.
This fixes compilation issue where the base address parameter
is not defined due to CONFIG_NSIM=y but CONFIG_SERIAL=n.
Change-Id: I1dc1c15b22ad174d4db514d89551780f0dfcae66
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Now that i2c_transfer/i2c_read/i2c_write are fully synchronous, no need
to use the polling based function.
Change-Id: Ib578cf4a6d72ad0817e1aaeebc7e4dab9f9d293f
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add a semaphore. Each task or a fiber that initiates
a transmission waits on this semaphore for it to complete.
Change-Id: Ia6cf961397614ead252ebea3949c016056289311
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduce the device_sync_call_t object type and its API.
This object type allows one thread to perform synchronous calls into a
driver. Only one thread can do such calls per instance of the
device_sync_call_t object since it makes a global record of what type of
thread is waiting on it.
Based on an idea from Dmitriy Korovkin and Peter Mitsis, moving their
proposal to a more generic API provides the solution for all device
drivers that exposes synchronous API in an interrupt based
implementation.
Change-Id: I793fac76645396bf4eb6be38b5a130ac6bde8f73
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Although it contains functions called from ASM-land, there's no
calling-convention specific code here.
Change-Id: I3d912bdf28e6f3e797e6a2d6b745302b4c884b4a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Added a new script to compare footprint apps and report
RAM or ROM changes in images. Also works without a git tree.
Usage:
./scripts/compare_footprint -h
./scripts/compare_footprint -b 1280bec
./scripts/compare_footprint -c 96acd07
Change-Id: Ib5d212eefe50c0d4650291265d6260604f9cd8c9
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Function irq_connect() needs an extra parameter, so
add it in.
Change-Id: I4c7458e67ae57124228eeb486c8daf3b66a97f8f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes the compilation error when CONFIG_UART_INTERRUPT_DRIVEN
is enabled.
Change-Id: I175eb6557a8ec9fa7291e20a5c05ee84797c230b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
build application for the supported platforms to catch any
breakage.
Change-Id: I31f3ffd3a95966ba72989a646d8ecd27efb55985
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This application creates a watchdog with 4.194s timout and reloads
every time it kicks (and does not force a reboot).
Change-Id: Ib128e2f7f91d05081d1bfb8cc24258b69bd3cb6e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds io/aux register support for IP configuration.
x86 and ARM configure IP through MMIO register access.
ARC architecture configure IP through io/aux register access.
Change-Id: I4d07b91af09d88b7eb6ac1aa02e875dcd626bd26
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
The Grove LCD driver requires running clock for delay. Since the clock
is only initialized in NANOKERNEL, so change the LCD driver init level
so that it starts after clock is initialized.
Change-Id: I6a2cadac1b34f95557f99c78615b1bd4aee541f5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The content of include/drivers/hpet.h is really private to
the driver and does not need to be exposed in public include
directory. So move the content into driver code.
Change-Id: Ica442e43c480a6b079b8d3c4e75e67adcfd0ba6b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a configuration that does not enable SSE and FLOAT to be used
with Quark systems.
Change-Id: I140d76893292bb9b0cef7c5a06acfd39529fe9ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Static irq api expect to have an isr with signature
void isr(void *arg).
This fixes the warning messages due the difference on
the isr parameter.
Change-Id: I64099ce47ba481b40446d5fb7e35fce0e46a9624
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Adapts IRQ macro calls for the new IRQ static support convention
on ARC.
The new IRQ_CONNECT macro requires to receive the irq numbers without
parenthesis around. This is needed to execute preprocesor substitution
correctly.
Change-Id: I318cb7916b6c3ff3a92b4d2e5a13379f8eed0b4e
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Adds static irq support for the Quark SE platform for the ARC core.
New linker sections and sw isr table initialization is needed to support
static IRQ.
Change-Id: I82af98a189f5a156e7f1018f3ecdbfa73ad3e6ef
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Adds support for static IRQ handler initialization.
Currently, IRQ_CONNECT and IRQ_CONFIG macros are emulating static
behavior through dynamic initialization.
This commit updates the macros to get real static initialization.
IRQ handlers must be assigned at build time.
Change-Id: Ia07fb25a5e4dae489f84ffcedb28007ee18a3b82
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
IRQ_CONNECT_STATIC takes 6 arguments on other
architectures, but the ARC one had only 5.
Change-Id: I257e8db12582ee2d6f93bba63af9aa597197a53d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
The _PASTE and _PASTE2 macros are relocated from init.h (device handling) to
toolchain/common.h for better reuse.
_PASTE and PASTE_2 macro are renamed to _CONCAT and _DO_CONCAT.
These names are more descriptive.
Change-Id: Ie2f5b0cba1f1179eb3fb5ec00236a75a73267f98
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since all the necessary bits utilizing UART by index have moved to
use device name instead, the uart_devs[] can finally be removed.
Change-Id: Idbae6b46c0af9eef6c22c59e121e9d6a6b52426a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use device name to find the UART device for uart_pipe usage,
instead of relying on an arbitrary index.
Change-Id: I36aaa4ed8f0b4905e4e741ca1464947e59f30869
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use device name to find the UART device for Bluetooth usage,
instead of relying on an arbitrary index.
The default device names being used are derived from the original
board.h for each platform. Some of them point to the same device
as UART console. Since this is a Kconfig option, the default
can be overridden so this is not a serious issue.
Change-Id: Ibe82f3968e72ba60f9c033aa3dfcb2fb3c41dc75
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use device name to find the UART device for console usage, instead of
relying on an arbitrary index.
Change-Id: Iebe01c9bf392dfee6d8284367f67647f7d47561a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove unused code after refactoring all the serial/UART drivers.
() Since device initialization is done by the drivers themselves,
there is no need to have config_func(), port_init() and uart_init()
to perform configuration external to driver. So remove the related
bits.
() The IRQ priority is only being used when doing IRQ_CONNECT_STATIC().
So there is no need to send it over during uart_init().
Change-Id: I72eb3402036b53cbc01c1eb968de0ddfa0096ee2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since the initialization is now done within driver, there is
no need to expose the port_init() function externally anymore.
After the consumers of port_init() have been updated. It is time
to perform the final step.
Change-Id: Ibe22c6d1dc9525c845acc094fa2066c922439ec3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since the initialization is now done within driver, there is
no need to expose the port_init() function externally anymore.
After the consumers of port_init() have been updated. It is time
to perform the final step.
Change-Id: Iba7aeb056edd63ef3f9b47d3801a3e0eeb9b34d5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
