() Make driver API into const, as it is not being modified
at runtime. Saves 24 bytes of RAM by putting it into ROM.
() Make device config structs as static as they are local to
the source file, and should not be referenced from outside at all.
() Same goes for the IRQ configuration functions, by declaring them
static.
Change-Id: I5225dc550bdd65ec88a8930944da063efe16a3b2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows to gracefully handle case when privacy is not enabled.
Change-Id: I3f4ebafd05abe186212b554161d8a8982f58ff45
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Change NBLE_UART_ON_DEV_NAME to BLUETOOTH_UART_ON_DEV_NAME for H:4
Change-Id: I4391b32c75c738478c964d4c79f6eb80d737b043
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable Power Management handling also for quark_se_devboard with
nimble HCI stack.
Change-Id: I6e5bb85c4f2370f52904be9dff14ce8e7fb1eb44
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
show different information based on the state of the current
documentation and link to development version and released
versions depending on where the user lands.
Change-Id: Ifa6263900222db483efa0388e2588dd97222ecb6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We should always use RPA for outgoing connection if privacy is enabled.
Otherwise privacy might be compromised if connecting to devices that
don't support pairing.
Change-Id: Ib12a5d9dfdc9285b5ff721f0fdb8f824ff1a8f0f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
set_random_address already checks if current random address needs
to be updated so there is no need to double check that before it
is called.
Change-Id: If5fe16f1b886aa877bf014a8977ccaea2c8ba6e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
hci_le_create_conn sets controller random address to one from
connection so there is no need to do that again in command status
event.
Change-Id: I22a24a46946413489445e577341cbf6ea68c0964
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need for special handling of command complete when
using bt_hci_cmd_send_sync for sending HCI command.
Change-Id: I60671e490958e67f5d20dc8c6ddbf51ca839c338
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need for special handling of command complete when
using bt_hci_cmd_send_sync for sending HCI command.
Change-Id: Ib67f06d47249d24854c07be34b0e39f70f5d5170
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Enable Power Management and enable logic for quark_se_devboard,
without the patch BLE Radio module might be enabled with JTAG tools
or right after boot.
Note that some boards do not have the GPIO pins connected to BLE
module but this should be still OK wrt to board functionality.
Change-Id: I9019e406afa36fe2dea52c07075c947e8c50a961
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove handling not used and obsolete function prototypes.
Change-Id: I6086f2e13efe7fc219f237dda710a545bec07612
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update RPC adding gap_tx_power request and event. Corresponds to BLE
version ATLASEDGE/PVT/FACTORY-386-gc1f694b.
Change-Id: I7e47553af63c3c3405522e37f86d9004dcca46f7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Also, lower the clock for the SPI bus in order not to hit the DW
controller CS issue.
Change-Id: I69c4211bfa6efb85117185e2ae813dd7c4915a7a
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Add support for anymotion and data ready triggers. Also, the user can
choose at configuration time the source of the triggers. For quark, in
particular, since the current driver for ARC does not allow receiving
interrupts from AON GPIO controller, IPM is used: a helper app on x86,
registers a gpio callback and will 'relay' the interrupt, through IPM,
to arc core.
Origin: Original
Change-Id: I170d723425c6280f9aa8c240b66275647723edd9
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
These will be needed by the trigger implementation.
Change-Id: Ib408ae540571447059301046a3486cedffa735d5
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
A mask was not applied on the shifted value, hence allowing one to pass
a val that would change other fields in the register.
Change-Id: I3c7bdb24c7b3a0ce94f664dbba303db35660ce7b
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
These will be used in the trigger implementation, which is a different
file, and will allow for the arrays to be static.
Change-Id: Ia34ebe9bde7d09abe8e93f3ace9e282cee1169db
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
The macro will be used in the upcoming trigger file.
Change-Id: I57a570fde37f31771b3d8bb9c028520fdc41da8f
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
This app is needed for Arduino101 only, or boards using the Curie
module.
BMI160 interrupt pin is connected to AON GPIO controller. The driver
handling the AON GPIO controller runs on x86 core. Even though, the AON
GPIO controller is accesible to ARC core too, the current implementation
for Designware controller driver does not allow it. Hence, this app will
register a gpio callback and signal the ARC core through IPM.
Other boards that use a gpio pin on the regular GPIO controllers don't
need this app.
Origin: Original
Change-Id: I225ca60735e39c7a47693dc53237f48cd9ac2680
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
The movement is needed because on some boards, like Arduino101, the
current GPIO driver implementation does not allow for receiving
interrupts from AON GPIO controller directly on ARC core. Hence, IPM is
needed to relay the interrupts from x86 to arc.
However, other boards that can use a regular GPIO intterupt or users
that connect a BMI160 chip separately, can still use the ARC application
as is.
Change-Id: I58dd77edd45ea2b071db5b99073eb15722847bfe
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
This makes function flow follow common error handling convention
err = foo()
if (err)
return err
Change-Id: Ifa3f44e3857b50436212cd5ed240795b220f8a15
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch reorganize tester gatt commands to handle also sequence
builded gatt data base
Change-Id: I5fc89c1c498dd2ecf3999bc93e3caffd14f67cb7
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Fixes compilation with debug for drivers h4 and h5
Change-Id: Ia09ce0a5ca3d684a4f9d25fdfe8530e80a46afac
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adds documentation file of oliemxino_stm32 to the
supported boards.
Change-Id: Ide6c7767be56d33e8c040a03df13337919a09750
Origin: Original
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Add configuration for OLIMEXINO_STM32 board.
By default, the UART console is forwarded to USART1 available on
UEXT connector. All GPIO ports available on the connecot headers
are enabled.
Change-Id: I60b3ff20ea60b5294a3a6c31f4dba0802794f9d8
Origin: Based on nucleo_f103rb board
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Those samples are confusing test suites by not generating
the expected zephyr.bin binary.
Change-Id: I4fb81782bacafb4f259e088df4b2518faa6f47cf
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This helps avoid digging out the driver and send callback pointers,
and helps prepare for extended logging support to export the HCI
traffic externally.
Change-Id: I1a9a58a6b47babed41b5bb9349635478905352e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for BMC150 accelerometer which differs from BMA280 only in
id, I2C address and acceleration data width.
Change-Id: Iccf47ecc5de9fdb1b9e45f1561c5dbb54f720806
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
The values from the accel data sample msb and lsb registers need to
be concatenated (using bitwise or) and not added, since together they
represent a single 14-bit value.
Change-Id: I476f05512beb3d6b81bacefd4c52e4b2a541708b
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Compute acceleration data and threshold scales based on data width and
acceleration measurement range instead of defining LSB values for each
measurement range.
Change-Id: I2a15877cef00d49d7a64fd6f6003722bb9f80b92
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
In some cases 'justworks' model applied on authentication/pairing process
requires user attention.
BT Core 4.2 says in table 5.7 [Vol 3, Part C, 5.2.2.6] that not always
passkey auto-accept can be applied on both devices involved in SSP
pairing for this authentication association model.
Change-Id: I7cc575ac088bcce7830f22d08e49dab40889f515
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Add config files to be used on Arduino 101 (or any Curie-based) board
with the MyNewt nimble stack running on the nRF51 and exposing HCI
over UART. These configs contain a stripped-down set of features so
that the resulting image fits e.g. on the Arduino 101.
Change-Id: I7300e9ca4205de6f52aa6ca1bfe4e0b011b6dcbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the guidelines for the tester application building usage.
Change-Id: Ibcd31b7bed827f8eee99fdf21d3bb1e8edd24d2e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The -nostdinc flag to GCC makes it not include its own directories when
searching headers, which means they need to be added manually. The same
Makefile line (~657) that adds the -nostdinc is also adding the correct path
for the gcc used to build, using the "-print-file-name=include" switch to get
the correct path for the respective gcc version.
The problem is that including limits.h from newlib will try to include gcc's
version too, which in every toolchain the SDK provides (and at least on my
machine, the same thing applies for the system gcc), limits.h is found under
gcc's "include-fixed" directory, not just include. So another -isystem should
be added with the value from "-print-file-name=include-fixed".
Jira: ZEP-142
Credits: Iván Briano
Change-Id: I33b7d9808d000a7346df4f88df92dc76e31fb2dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
generates lots of false postives, so make it warn only.
Change-Id: I0b2fedc564c29bff32f7c48702a9ad54a969650b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use SOC_FAMILY and SOC_SERIES to identify soc families and series
and to point to the correct linker files and files related to a
specific SoC.
Change-Id: I8b1a7339f37d6ea4161d03073d36557a40c0b4a6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add additional layers when defining SoCs to allow reuse among SoCs
of the same family and architecture.
The Board is the first location where we search for a linker.cmd file,
if not found we look for the linker file in
arch/<arch>/soc/<family>/<series>
Change-Id: I51d5e9a056220d0bd2ae0fa31474ffe63568e698
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use SoC family/series and reoganise the structure to follow new
hierarchy.
Change-Id: I8637f1487a8287a6614ce6636cd018cf342fec95
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
