If the connection process fails the user may still need to do
bt_conn_get_info() in its connected callback, so this needs to give a
meaningful value for the remote address. Start off with the one that
was given to bt_conn_create_le().
Jira: ZEP-2005
Change-Id: I4e9a033dec7c55fa549f5b6746c3bd81c0ccade5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This replaces custom made list manipulation with sys_slist_t which makes
the code more readable.
Change-Id: I9ee024ad83da3e28f2ecab74b001bf0e795fe489
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use #if defined(...) constructs while using conditional
compilations of advanced event preparation and advanced
scheduling implementations.
Change-id: I728c76d0e7dbbfa378e8978b726ec404d9e55a72
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Move the scan duplicate filter length option and group it along
with rx/tx buffer size Kconfig options.
Change-id: I3df07e667029c7d2571270db442ecb7241a417c2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The bt_conn_set_state() function will not notify the connected
callback of the connection error if conn->err isn't properly set.
Jira: ZEP-2005
Change-Id: Idc30e736f4d8ba00156bf5c0e37dcccdb151742f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BR/EDR configuration doesn't fit e.g. the Arduino 101 anymore.
Limit it to Qemu for the time being, which is anyway the primary
target where the functionality is being tested.
Change-Id: I9a34c82157d56079e43acabe29eeadd6d99e03fe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
tests/kernel/context:
added test point to cover k_cpu_atomic_idle.
Jira: ZEP-1242
Change-Id: Id09c89fd367d527ea1087e6eb2bdba29a338ceaf
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
The following warning occurs when !SYS_LOG_INF due to the fact
that these variables are only used for information purposes.
When logging is <INFO then the variables aren't utilised at all.
To fix this we're removing the variables completely and using
the direct calls from within the information prints instead.
drivers/dma/dma_stm32f4x.c: In function 'dma_stm32_dump_reg':
drivers/dma/dma_stm32f4x.c:196:11: warning: unused variable 'sfcr' [-Wunused-variable]
uint32_t sfcr = dma_stm32_read(ddata, DMA_STM32_SFCR(id));
^
drivers/dma/dma_stm32f4x.c:195:11: warning: unused variable 'sm1ar' [-Wunused-variable]
uint32_t sm1ar = dma_stm32_read(ddata, DMA_STM32_SM1AR(id));
^
drivers/dma/dma_stm32f4x.c:194:11: warning: unused variable 'sm0ar' [-Wunused-variable]
uint32_t sm0ar = dma_stm32_read(ddata, DMA_STM32_SM0AR(id));
^
drivers/dma/dma_stm32f4x.c:193:11: warning: unused variable 'spar' [-Wunused-variable]
uint32_t spar = dma_stm32_read(ddata, DMA_STM32_SPAR(id));
^
drivers/dma/dma_stm32f4x.c:192:11: warning: unused variable 'ndtr' [-Wunused-variable]
uint32_t ndtr = dma_stm32_read(ddata, DMA_STM32_SNDTR(id));
^
drivers/dma/dma_stm32f4x.c:191:11: warning: unused variable 'scr' [-Wunused-variable]
uint32_t scr = dma_stm32_read(ddata, DMA_STM32_SCR(id));
Change-Id: I91a0373ef6c9afa8a342181c0ab24bd58743300d
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Coverity points out that uart_irq_update() return value
should be checked.
Coverity-CID: 166776
Change-Id: I3a754dae9e8f1563f4879e2fadfd89621785de8f
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
tests/kernel/common:
added test case to cover kernel clocks service.
https://www.zephyrproject.org/doc/kernel/timing/clocks.html
Jira: ZEP-1242
Change-Id: I40a06dd9d4dcb1ed24d488088eb2e456740c3bad
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
This is intended as a temporary fix for ZEP-1882.
Investigation for this bug has shown that the current SDK 0.9 compiler
for ARC generates incorrect code under -Os optimization level.
Kuo-Lang Tseng found out that SDK 0.8.2 does not have this issue, and
that lowering optimization level to -O2 fixes the issue with SDK 0.9.
Juro Bystricky is working on an updated SDK with ARC GCC 6.3.0, but
there are still problems with it, so he also suggested to use -O2 in
the meantime.
Instead of blindly setting -O2 for all toolchains and architectures,
let Makefile.toolchain.zephyr make the decision for ARC and 0.9 only.
Tested with hello_world, CONFIG_ADC=y and BOARD=arduino_101_sss.
Jira: ZEP-1882
Change-Id: Ifde2e3950c9d93eed8982149805acfda9d13a94f
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Initial assumption with Arduino 101 was that the "alternate setting
name of the DFU interface" would be simple enough to be used as the
grep pattern when attempting to find the board in DFU mode.
However, for boards such as the 96Boards Carbon, this name includes
grep meta-characters, so the DFUUTIL_ALT environment variable is
provided as a numeric value, instead of the previously expected name
string.
In order to avoid false positives, we now check whether DFUUTIL_ALT
is a numeric value, and the grep pattern is adjusted accordingly to
search for either "alt=" or "name=".
Also take into account that the name might contain spaces.
Change-Id: I81351d03bd727b35093fd1280e2b8b6904f3c89b
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
CONFIG_DEBUG_INFO was disabled for IAMCU targets. As per Jira update forked
arch/code is gone. So it should not block enabling DEBUG_INFO for IAMCU.
Currently CONFIG_DEBUG_INFO depends on (x86 = y && !X86_IAMCU)
CONFIG_DEBUG_INFO can not be set for IAMCU. this patch removes dependency.
Jira: ZEP-601
Change-Id: Ib5635096f83f7b931c277b667a55c6d54f8e946a
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Add a configuration that strips the BLE controller down to its simplest
form to catch any issues when commonly used options are not enabled.
Change-Id: Ifbec01d62b7d45fe9139dadaba734eff3b7a72b6
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Conditionally declare the iterator variable to avoid a warning when
compiling the controller without any duplicate filter entries.
Change-Id: I69e23d4c594db18172dc57d45e7925243fe2da69
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The main issue is that after the latest update to TinyCrypt the
ecc_make_key() API expects a twice as big random number. Fix this, but
also move the variables to the static context since we're limiting one
HCI command at a time. Also place the variables in a union based on
their temporal dependencies. Thanks to this, we can now further reduce
the ECC stack size by 40 bytes (on ARM this then reports 12 bytes of
unused stack after key-pair generation and DHKey calculation).
Change-Id: I1036e0ca15f7c08063cba9e568d7df99e65c9156
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
HCI event masking allows the host to choose which events are reported to
it to avoid interruption and excessive traffic. This patch implements
masking to drop any non-enabled events as specified by the host.
Jira: ZEP-1769
Change-Id: If09d4aa22b0da8f743fc42a3b0db3f369daaff96
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the controller's ability to drop duplicate advertising reports
when instructed by the Host.
Jira: ZEP-1246
Change-Id: I2d1b7abf1ed950dde705e5df30a858c595f3834c
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add Controller advanced Kconfig options to select IRQ
priorities of the Radio, Ticker's Worker and JOB IRQs.
This will provide an opportunity to have peripheral IRQ's
of higher level than Bluetooth Controller.
Change-id: Iaa128c1cd64a309a77d42d485fdefe68f31e4895
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Move the nRF5 specific GPIO debug pin macro definitions to
hal/nrf5/debug.h.
The Controller's hal folder contains prototypes and
hal/<soc> shall contain SoC specific implementation to
realize a software-based Link Layer.
Change-id: Ic7bf283f926bbc3069e7d15c047fe93a6daa894f
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Cleanup redundant ticker busy loop that could hang if the
worker and job IRQ priority levels are misconfigured, and
job gets disabled before all users/mayfly functions using
job complete.
Change-id: I053ad75a4328c51cfe651b820a2fa961e42ae48f
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
In a host plus controller combined build, if no connection
is required, deselect CONFIG_BLUETOOTH_MAX_CONN. This will
reduce RAM and ROM usage in the controller.
Also, make BLUETOOTH_PERIPHERAL, BLUETOOTH_CENTRAL and
BLUETOOTH_CONN switches accessible by the controller kconfig
to select the right roles to enable.
Change-id: I164cf696ab2a6f4859086d2cb18f6d3f2b1399d3
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
BR/EDR sources that was compiled under BLUETOOTH_CONN
if-clause is moved out as independent conditional
compilation based on selected BR/EDR feature support.
Change-id: Iedfafc6056132654a9150ed235b245f8be62b4b1
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
If during hfp_hf_send response callback is not filled with NULL
and you receive unsolicited callback. which will not be taken care.
This patch fixes this issue.
Change-Id: I04007059d62273b9cdddf29e2d4a9086b07a01e5
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
A initiation to send AT commands is given in the application
with prefered AT command as the argument.
This patch supports to send the command within the profile stack.
Change-Id: Id5caa3ce64070fc17e60f4ea61a8c83a961099ba
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This cause packets that are up to 2 bytes off segment maximum length
to be considered transmitted when in fact that could be some bytes left
to be transmitted which cause any subsequent packet to trigger invalid
SDU on the remote end:
[ 3612.376068] l2cap_le_data_rcv:6757: SDU fragment. chan->sdu->len 66 skb->len 68 chan->sdu_len 67
[ 3612.376073] Bluetooth: Too much LE L2CAP data received
Change-Id: Id2f3469ce1c0b27bb87c4d5bc18e6ede9d93dbde
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move the Kconfig option BLUETOOTH_MAX_SCO_CONN to BR/EDR if
clause.
Change-id: Iead2bc5a70a9499125f9edf22e85ade4dda8f5ac
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Move the BLUETOOTH_UART_TO_HOST_DEV_NAME options to after
BLUETOOTH_HCI_RAW option to group it together in the
Kconfig while using menuconfig.
Change-id: I21da080a5ffa30a08b1a1aa148ce8116e63a3c18
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Group the stack size related options together to represent a
better order when using menuconfig.
Change-id: Id2968607e5054e30029c42987b3e70cb8cbfc74d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Move the Kconfig BLUETOOTH_CONTROLLER switch from top-level
Bluetooth Kconfig to Bluetooth Controller Kconfig.
Change-id: Iead760c22a0fbbda11e4558c4943b3366ecc8769
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This makes the code consistent with respect of errors, so instead of
checking directly on bt_gatt_write_without_response let this up to
bt_smp_sign.
Change-Id: Iea8d0bd2020df427b7542e2878ce8d9fd8b94170
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When there's no support for connections there's also no need to track
the controller side buffers.
Change-Id: I7eac3af486f139f1ab32efda8ccfa188ed8359eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Checking both if signing has been requested _and_ conn->encrypt can
bypass signing leading to the caller to assume that a proper signature
was send in when fact it was not.
To fix now the code explicitly checks if SMP is enabled and in case it
is and signing was requested fails.
Change-Id: Ie17df4a4c2191f2da0172c687db7999395839a97
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In case the controller is receiving PDUs very rapidly, prevent it from
spamming the logs by limiting its stack analysis to at most once every
5 seconds.
Change-Id: I31c70d28e8af62b27172a4a77bf6e614ea3e20eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move company id and subversion number Kconfig to the
Controller configuration section from the features section.
Change-id: Ic4deb8b24d84d9b1817ba542705eebd612f0e020
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added a explicit Kconfig option to show the Controller's
advanced feature configurations. These feature
configurations need specific in-depth Controller
implementation knowledge and should not overwhelm normal
users of the Controller.
Change-id: Iae764f2b266b199cf180936c51c7a4ea089ee510
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig option to enable advanced scheduling in the
controller.
Enable non-overlapping placement of observer, initiator and
master roles in timespace. Uses window offset in connection
updates and uses connection parameter request in slave role
to negotiate non-overlapping placement with active master
roles to avoid slave roles drifting into active master
roles in the local controller.
This feature maximizes the average data transmission amongst
active concurrent master and slave connections while other
observer, initiator, master or slave roles are active in the
local controller.
Disabling this feature will lead to overlapping role in
timespace leading to skipped events amongst active roles.
Change-id: I16e4e6c3ca99f93987ab86924af0cb9d76bdbc7e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
HCI drivers are obliged to send HCI Command Status/Complete events
from a separate context than all other data, however the ECC wrapper
was violating this rule (sending everything from the same ECC thread).
This could lead to a deadlock if e.g. the ECC API user decides to
generate a DHKey from the same callback that it got notified of local
key-pair generation.
The obvious solution is to emit the Command Status directly from the
send function, before passing the command to be processed by the ECC
therad (through a k_fifo). However, this is not quite so simple since
bt_buf_get_cmd_complete() reuses the original command buffer, meaning
we'd loose the original parameters after sending a Command Status.
To work around this limitation with bt_buf_get_cmd_complete() we stop
passing the command buffer to the thread and instead store the
parameters in static variables and do the thread communication using
flags and a semaphore. One side effect is that only one command can be
pending at a time, however that works out fine for all of the users of
ECC.
A nice side effect of moving some things to static variables is that
we end up reducing call stack usage in the ECC thread, allowing it to
be shrunk by 180 bytes (verified to be sufficient for both ARM and
x86 boards).
Change-Id: Ic41f0316d3fe4d14b64fd3d0a549b221d168411a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added Kconfig option to enable advanced event preparation
feature.
Enables advanced event preparation offset ahead of radio
tx/rx, taking into account predictive processing time
requirements in preparation to the event, like control
procedure handling and CPU execution speeds. Crystal
oscillator is retained between closely spaced consecutive
radio events to reduce the overall number of crystal
settling current consumptions.
This feature maximizes radio utilization in an average role
event timeslice when they are closely spaced by using a
reduced offset between preparation and radio event.
By disabling this feature, the controller will use a
constant offset between the preparation and radio event. The
controller will toggle crystal oscillator between two
closely spaced radio events leading to higher average
current due to increased number of crystal settling current
consumptions.
Change-id: I19e640f7395ac7938873ef4bfac38acf8d6f7e0e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The monitor protocol provides support for logging packet drops with
the help of the extended monitor header. Implement support for this.
Change-Id: I7ef7894816cb8d1bd876842d0253ef0980471e69
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The IRQ lock should never be held for long periods of time. Instead of
using the IRQ lock to prevent monitor protocol corruption simply drop
the data. Follow-up patches will add additional drop count tracking so
that these get reported properly over the protocol.
Change-Id: If498125b29f1b58bed676c78ad2062e2aa206318
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Using lookup table to search for unsolicted command and its
handler function.
Change-Id: Id677dad3918d7187e0065ada2985ec12a97f8ed9
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
