This https-client sample starts to send HTTP GET/HEAD/POST
requests same way as http-client, to https server that can
be found in net-tools repository.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add HTTPS support into http-client library. The init of the
HTTPS client connection is different compared to HTTP client,
but the actual HTTP request sending is using the same API as
HTTP client.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is done so that both http_client and http_server functionality
can share the same heap.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Various network samples contained QEMU slip setup instructions
or those instructions were missing. A reference doc in
doc/subsystems/networking/qemu_setup.rst file already has the
setup instructions for QEMU. So add a reference to that file
in samples/net/*/README.rst files and remove unnecessary slip
setup instructions in relevant files.
Fix various typos in readme files at the same time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
On some devices, when k_cpu_idle() was called we were getting
interrupts that were not the timer interrupt. On bbc_micro
a power clock control driver interrupt was happening instead
and k_cpu_idle() was returning without the system tick advancing,
failing the test.
The clock control interrupts seem to only happen early in device
boot; moving the idle test much later lets the test pass on this
board (and likely all other NRF5 based boards).
Issue: ZEP-2257
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add tests for the newly-added JSON_OBJ_DESCR_OBJ_ARRAY. These pass.
Note that this also adds test coverage for decoding an array of
maximum length, to avoid regressing the recently-introduced fix for
this edge case.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Since JSON_OBJ_DESCR_ARRAY is suitable only for arrays of primitives,
add JSON_OBJ_DESCR_OBJ_ARRAY (and a ..._NAMED variant), to allow users
to handle arrays of objects.
Having a macro is important, given the unintuitive space optimization
used for storing the offset to the structure element containing the
number of elements in the array.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This function currently fails when decoding an array with number of
elements exactly equal to the maximum available in the struct.
To fix this, move the check for if the current field is past the end
of the array to just before attempting to decode a value. This allows
the last element to be followed by a JSON_TOK_LIST_END token in the
case that the array is full, and the function to return success.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
The JSON library doesn't properly encode arrays whose elements are of
object type. Fix that.
This fix avoids allocating a temporary descriptor on the stack, and
keeps the size of struct json_obj_descr unchanged, by preserving an
unintuitive size optimization made by the library. See the comments
in the patch for more details.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
This (and JSON_OBJ_DESCR_ARRAY_NAMED) are really intended for handling
arrays of primitive type only. They don't allow users to declare
descriptors for arrays of objects. Clarify this in the Doxygen.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
When we build with newlib enabled and utilizing one of the other
variants (like having floating point enabled) we need to have the proper
library path setup to find the library. This is mimicked after what we
do in Makefile.toolchain.zephyr for newlib.
Issue: ZEP-2240
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Stack sentinel doesn't prevent corruption, it just notices when
it happens. Any memory could be in a bad state and it's more
appropriate to take the entire system down rather than just kill
the thread.
Fatal testcase will still work since it installs its own
_SysFatalErrorHandler.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- _SysFatalErrorHandler is supposed to be user-overridable.
The test case now installs its own handler to show that this
has happened properly.
- Use TC_PRINT() TC_ERROR() macros
- Since we have out own _SysFatalErrorHandler, show that
k_panic() works
- Show that _SysFatalErrorHandler gets invoked with the expected
reason code for some of the scenarios.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes an issue where if a thread calls k_panic() or k_oops()
with interrupts locked, control would return to the thread
and it would only be aborted after interrupts were unlocked
again.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
One of the stack sentinel policies was to check the sentinel
any time a cooperative context switch is done (i.e, _Swap is
called).
This was done by adding a hook to _check_stack_sentinel in
every arch's __swap function.
This way is cleaner as we just have the hook in one inline
function rather than implemented in several different assembly
dialects.
The check upon interrupt is now made unconditionally rather
than checking if we are calling __swap, since the check now
is only called on cooperative _Swap(). The interrupt is always
serviced first.
Issue: ZEP-2244
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The wiki directions indicate that this script should be used,
and openocd.sh doesn't even work. Switch to pyocd.sh by default.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The Sam3x HAL defines __NVIC_PRIO_BITS to 4.
Fixes an issue where interrupt priorities and masking
were not being done correctly.
Issue: ZEP-2243
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The sample app "static_lib" is very important to Zephyr user, which
demonstrate how to build and link a static lib.
ISSM team wanted to integrate this app in their IDE for quark platforms.
However they find the in "static_lib/hello_world/Makefile" BOARD is
hardcoded as qemu_x86.
This patch supports other BOARD passed from build command.
I have verified this app working fine @Arduino101.
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
This patch adds a condition on the FLASH_LOAD_OFFSET and FLASH_LOAD_SIZE
to make them conditionally excluded if HAS_DTS is enabled. FLASH
partition information must be defined for all DTS platforms which
utilize flash.
For DTS enabled platforms, CONFIG_FLASH_LOAD_OFFSET and
CONFIG_FLASH_LOAD_SIZE will be generated from the flash information
defined in the DTS file. The values used for these variables will be
determined by the zephyr,code-partition chosen node. If no chosen
node is specified, the zephyr,flash chosen node will be used.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The hard-coded value of 10ms doesn't take the system configured
amount of ticks per second, nor does it account for an unlucky
tick advance which causes the test to fail very intermittently
in QEMU.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
fixed literalinclude warning that referenced beyond end of file and
added lineno-start option to show correct line number of included file
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit fixes the compilation error that occurs if both UART
ports on the FE310 SoC are enabled. The error occurs due to the
missing function definition of uart_fe310_irq_cfg_func_1 .
Signed-off-by: Jens Peter Schroer <jens@manetos.com>
The REGION bits (bit[3:0]) of MPU_RBAR register can specify the number
of the region to update if the VALID bit (bit[4]) is also set.
If the bit[3:0] of "region_addr" are not zero, might cause to update
unexpected region. This could happen since we might not declare stack
memory with specific alignment.
This patch will mask the bit[4:0] of "region_addr" to prevent updating
unexpected region.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
When checking for line length limits, ignore lines with Signed-off-by.
Some developers have a long name that would not fit within the limits.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When src and dst addresses are compressed based on context
information, uncompression method should verify CID bit,
SAC and DAC bits and context ID's. But it has missed some
cases which resulted in invalid uncompressed IPv6 header.
e.g. CID is set, SAC is 0 and DAC is 1 and context id's provided.
Uncompression method assumed that src address is compressed based
on context information but it is not.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Empty RPL HBH header will be inserted while finalizing IPv6 packet
but updated after finding nexthop and sent the packet. In case of
Bluetooth or multicast dst address it was missed. Resulted in
empty RPL HBH header and packet dropped at peer node. It should
be updated in all circumstances.
Jira: ZEP-2088
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The mbedtls debugging function was set before the ssl config
struct was initialized. This meant that it was not possible
to activate mbedtls debug prints. This commit sets the debug
print option after the config struct has been initialized.
Fixed also the debug prints which print extra \n which looks
very bad in debugging outputs.
This commit does not enable mbedtls debugging, it just makes it
possible to output mbedtls debug prints. In order to get mbedlts
debug prints one needs to do this:
* set DEBUG_THRESHOLD to >0 in http_server.c
* enable CONFIG_NET_DEBUG_HTTP in project config file
* enable MBEDTLS_DEBUG_C in mbedtls config file (see file pointed
by CONFIG_MBEDTLS_CFG_FILE option)
* in qemu, one needs to increase the size of the available RAM,
this setting does the trick, CONFIG_RAM_SIZE=300
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor internals of IPM driver removing bitfields and byte access of
32 bit registers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The current method of accessing 32-bit data and control registers does
not work for all quark architectures. Sometimes writing to those
registers byte-by-byte results in last byte occupying whole 32 bit
register.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move all characters to "char" type: no implicit conversions between
"unsigned char", "u8_t", etc.
Tested with ISSM 2016.2.085.
Jira: ZEP-2159
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Semantics of ENOENT error as used previously is "named entity not
found", whereas for "I/O handle is not valid", there's EBADF. For
example, POSIX/SUSV2 doesn't even list ENOENT as a possible error
for accept(), connect(), recv(), etc. whereas it lists EBADF, e.g.:
http://pubs.opengroup.org/onlinepubs/7908799/xns/connect.html
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add a repeat param to gatt-write-without-response so that
it covers what gatt-write-without-response-repeated was
doing. gatt-write-without-response was removed in the
commit 26eae70da.
gatt-write-signed too will have repeat param with this
change.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add clarification that the DNS server configuration must be edited in
the respective prj.conf file.
JIRA: ZEP-2040
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Inserting the IDT results in any data afterwards being shifted.
We want the memory addresses between the zephyr_prebuilt.elf
and zephyr.elf to be as close as possible. Insert some dummy
data in the linker script the same size as the gen_idt data
structures. Needed for forthcoming patches which generate MMU
page tables at build time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Having tried and tested building Zephyr using the standard SDK on
Windows 10 using the new WSL (Windows Subsystem for Linux), add the
documentation so that others can benefit from the functionality.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch adds a YAML template file that describes the format of a
Zephyr device tree YAML specification.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds documention for device tree development in Zephyr. This
includes a description of device tree, how it is integrated into Zephyr,
and other related information.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
