There is a typo in the area description of the testcase (kerne.XYZ vs
kernel.XYZ).
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The previous help text rendered as a single paragraph in the Kconfig RST
reference. The new help text renders as a bullet list and matches the
format of SYS_LOG_CRYPTO_LEVEL.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
The new version of the reference page for a symbol lists the following
essential and generally useful information at the top of the page:
- Prompt
- Type
- Help text
- Direct dependencies (from 'depends on', and inherited from if's and
menus)
- Defaults
- Other symbols selecting or implying the symbol
The current symbol value and visibility are no longer displayed. They
don't make much sense in a reference document, as they depend on user
values from configuration files.
The bottom of the reference page also includes the symbol represented in
Kconfig format (including propagated dependencies).
All references to defined symbols appearing in expressions are turned
into links, which can be clicked on to jump to the reference page for
that symbol.
The following (slightly outdated) screenshot gives an idea of the
format:
https://www.dropbox.com/s/a34tlk2ncyus8po/promptandtype.png?dl=0
This commit also removes Kconfiglib 1, since it is no longer used.
Fixes#5622Fixes#6821
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
The final ending chunk was not sent after the request was served.
This caused the remote client to constantly send the same request
to the server.
Fixes#6356
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In sample application of COAP put and post
methods are implemented in coap-server.c
and coap-client.c
Signed-off-by: Tarun Kumar Agarwal <tarun.kumar.agarwal@intel.com>
Selecting a choice symbol is always a no-op, and the latest version of
Kconfiglib prints a warning. This commit removes all selects of choice
symbols, which might make the Kconfig files a bit clearer and gets rid
of the warnings.
This is just a dumb removal. I did not try to guess the intent of each
select.
Fixes#6849
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Running 'make html' in doc/ when doc.log is missing or empty gives the
following error if sphinx-build doesn't write anything on stdout/stderr:
Error in ./scripts/filter-doc-log.sh: logfile "doc.log" not found.
Makefile:84: recipe for target ”html” failed
make: *** [html] Error 1
The problem is that scripts/filter-doc-log.sh tests for the existence of
the log file with [ -s ${LOG_FILE} ], which requires it to be nonempty.
Fix it by using -e instead, which only checks if the log file exists.
scripts/filter-known-issues.py ($KI_SCRIPT) seems to be able to deal
with empty files (and runs quickly).
Fixes#6854
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
When sphinx-build is run under Python 2, running e.g. 'make html' in
doc/ currently causes the following error:
Exception occurred:
File "conf.py", line 128, in <module>
from lexer.DtsLexer import DtsLexer
ImportError: No module named lexer.DtsLexer
The problem is that doc/extensions/lexer/ contains no __init__.py file,
which prevents Python 2 from finding submodules in it[1].
The problem does not occur for Python 3, due to implicit namespaces
packages:
https://www.python.org/dev/peps/pep-0420/
Add an empty __init__.py to doc/extensions/lexer/ to fix building when
sphinx-build uses Python 2 (2.7 is still the version recommended on the
Sphinx homepage). This won't alter the behavior for Python 3.
(doc/extensions is added to the search path at the beginning of conf.py
and so doesn't need an __init__.py. doc/extensions/zephyr already has an
empty __init__.py.)
[1] https://docs.python.org/2/tutorial/modules.html#packagesFixes#6851
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Move core TCP functionality from net_context.c to tcp.c. Create empty
functions that the compiler can remove if TCP is not configured. As a
result remove TCP ifdefs from net_context.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Similar to the socket connect() call, calling connect for a UDP
context needs to set both local and remote addresses and port
number. Fix this not to be exclusive for TCP.
Similarly, the remote destination can be a multicast address when
UDP is used.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Queue a TCP FIN packet when needed if the socket was connected or
listening and where FIN wasn't already received.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
A new context cannot have callbacks set, as it was freshly created
in the beginning of the function. Thus the extra callback clearing
can be removed. This is a left-over from commit ce41d5f432.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Ifdefs around TCP code can be removed since the TCP code will compile
to empty functions when not enabled.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Refactor sendto() code so that destination address and its validity
is checked first, followed by offloading verification. Move context
and shutdown checks into TCP queueing function.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
With CONFIG_NET_TCP is not set, provide empty static inline
prototypes for all TCP functions available to other parts of
the IP stack.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Enable the loopback driver and set up network testing so that it
will not require a SLIP driver. Move values from the extra test
config so that they are always enabled.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The generated header uses Zephyr's custom integer type
definitions but wasn't including the proper header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update Kconfiglib to upstream revision 7245bad9ebb58 (+ local Zephyr
modifications), to get the following improvements/fixes in:
- Print a warning if an int or hex symbol is assigned a value that lies
outside an active 'range' constraint.
- Turn 'FOO' into a link in 'select FOO' when generating the Kconfig
reference documentation.
- Parenthesize '&&' expressions within '||' expressions --
(A && B) || (C && D) is more readable than A && B || C && D.
The final two fixes will only be visible once the fix for #5622 gets in.
Fixes#6749Fixes#6844
Origin: https://github.com/zephyrproject-rtos/Kconfiglib/tree/zephyr
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
The __net_if_align was removed in earlier commits but it needs
to come back as in some arch the alignment of net_if section
will be wrong.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
this sample expect there has a button in you board, that was
the mouse's left button, tested in linux by using evtest.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Adapt the MyNewt non-volatile configuration system to become a settings
system in Zephyr.
The original code was modifed in the following ways:
* Renamed from config to settings
* Use the zephyr FCB, FS API, and base64 subsystems
* lltoa like function was added to sources as it was required but not
included in Zephyr itself.
* The original code was modified to use Zephyr's slist.h as single
linked list implementation.
* Reworked code which was using strtok_r, added function
for decoding a string to a s64_t value.
* Thank to the above the settings subsys doesn't require newlibc anymore.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The sensor enables the readout of multiple consecutive registers if
the MSb of the sub-address is set. The other 7bit are the register
address.
Signed-off-by: Tobias Aschenbrenner <taschenb@posteo.de>
As per uart_pipe.c, irq_is_pending should only return true if any
*unmasked* interrupts are pending.
The device_get_binding() code only checks devices that have an API.
Set the API at compile time so that other devices can refer to the CDC
ACM driver.
usb_write() may return EBUSY if the endpoint is full. Propagate this
for future use.
Signed-off-by: Michael Hope <mlhx@google.com>
Combine several generic config file into prj.conf that can be
used by several boards and configurations.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
__packed allows the struct to be linked at a non-word size boundrary
which causes an unaligned access fault on the Cortex-M0+.
Signed-off-by: Michael Hope <mlhx@google.com>
net_eth_get_hw_capabilities() calls .get_capabilities() which is part
of the ethernet API but not the net_if_api that netusb implements.
This causes a fault as .get_capabilities() was past the end of the
struct and resolved to a random address.
Also, make the API const and give it a unique name.
Signed-off-by: Michael Hope <mlhx@google.com>
There can be lot of traffic class threads and each will have
their own stacks. This can trigger issue when traversing the
stacks list in "net stacks" shell command. To overcome this issue,
we need to align each net_stack_info struct by 32 bytes. This is
the same issue that happened with net_if earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This demostrates how to classify the network traffic when sending
data. The application will create similar functionality as
echo-client so user can use echo-server running in remote host to
test this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "net stacks" command was printing TX or RX thread values so
that it was not possible to use the values in debugging easily.
Add traffic class value when printing the info so that it is
easy to see what TX or RX queue is doing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add statistics for number of packets and bytes to each traffic
class. Print this information in net-shell.
Also make sure that we do not calculate total packet length many
times. So calculate network packet total length once and then use
that value instead of calculating it many times in a row.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we can set the priority of the network packet and
that high priority packets are sent before low priority ones.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this commit it is possible to add priority to sent or received
network packets. So user is able to send or receive higher priority
packets faster than lower level packets.
The traffic class support is activated by CONFIG_NET_TC_COUNT option.
The TC support uses work queues to separate the traffic. The
priority of the work queue thread specifies the ordering of the
network traffic. Each work queue thread handles traffic to one specific
work queue. Note that you should not enable traffic classes unless
you really need them by your application. Each TC thread needs
stack so this feature requires more memory.
It is possible to disable transmit traffic class support and keep the
receive traffic class support, or vice versa. If both RX and TX traffic
classes are enabled, then both will use the same number of queues
defined by CONFIG_NET_TC_COUNT option.
Fixes#6588
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to create array of thread stacks using
NET_STACK_ARRAY_DEFINE() macro. This allows more debug information
to be printed by "net stacks" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add context option support and implement PRIORITY option that
can be used to classify the network traffic to different trafic
classes according to said priority value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
