This test prints out to the console, when testing on real hardware,
parse output and compare to what we are expecting to avoid timeouts.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We run the same tests over and over again in different qemu
environemnt. Optimize the list to reduce redundant testing of the same
protocols. Picked qemu_x86 because it has userspace enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We are testing and building this already using qemu_x86, no need to
build the same thing all over again.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove galileo as the only board to build for and cleanup the filtering.
Also, remove arduino 101 conf, this is not a networking platform we want
to tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To make Zephyr builds more reproducible, default to disabling build
timestamps. Expand the documentation for CONFIG_BUILD_TIMESTAMP to
explain that enabling it will make the build unreproducible.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
srd bits start at bit 8, not bit 5.
To date we are not using sub-regions so this problem was
undetected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A Kconfig option is added for setting the initialization priority.
This is done to make the initialization priority requirements in
nrf52_pca20020 board power up sequence clearer.
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
A documentanion file is added for Thingy:52. This document only
discusses the currently supported features of the board. The omissions
include the audio features and sensors which don't have a working driver
in tree.
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
A new board configuration is added for Thingy:52, also known as
PCA20020. This includes support for some of the on-board sensors, and
other peripherals such as the on-board GPIO expander.
The board power rail sequencing is also implemented, as the rails need
to be powered up in a correct order and before certain device driver
init calls are made.
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
In many cases we are calling cmake twice with the same options, first to
build, and then we do the same thing when we want to call 'make run'.
Just call cmake once.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When running large set of tests we always get a huge list of footprint
changes that mask the test results making them impossible to see on the
screen. Show the footprint results only on-demand and not on every
build.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The object returned by NamedTemporaryFile cannot be opened a second
time while the file is still open on Windows. This is exactly what the
JLink commander needs to do with the resulting file, however, breaking
jlink flash on that platform.
Fix this by using a temporary directory instead, and creating a file
inside it. The resulting directory still gets cleaned up, but the
resulting file can be read by the commander.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Because we now return first non VLAN interface if found, the
VLAN disable test case needs adjustment.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we have several network interfaces and not all of them are
VLAN enabled, then we might return wrong network interface to
the ethernet device driver when it asks one. To fix this, return
the first interface that has not enabled VLAN if the tag of the
network packet is unspecified.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introduce hal/ticker.h to abstract out SoC specific
implementations and move any conditional compilations to
include header files here.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Node Identity advertising should only be automatically enabled
when provisioning happened over PB-GATT, but not when it happened over
PB-ADV. Move the enabling of Node Identity to the provisioning code,
where we know the bearer that was used (this information does not get
passed to the bt_mesh_provision function).
Fixes#6338
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This commit disables Bluetooth and adds a customized vector
table for nRF52X-based platforms in the irq_vector_table kernel
test, in order to prevent UsageFault during system timer
interrupts, and, therefore, let the test execute properly.
This commit fixes#6890.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit exposes the RTC1 ISR handling function, so the
function can be directly used in tests which generate
customized vector tables manually and require a visible symbol
for the ISR function.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add Cortex-M33 and Cortex-M7 in the list of supported
ARM MCUs for the arm_irq_vector_table test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
set_report() is used by the host to set a feature on the device such
as turning a LED on or off.
This is also used by protocols such as FIDO U2F to transfer data to
the device.
Signed-off-by: Michael Hope <mlhx@google.com>
int_in_ready is an optional callback that is called when the current
interrupt IN transfer has completed. This can be used to wait for the
endpoint to go idle or to trigger the next transfer.
This is needed for protocols like FIDO U2F that use the interrupt
endpoint for transfers.
Signed-off-by: Michael Hope <mlhx@google.com>
Provide board porting guidelines to help achieving a coherent
board library to ease work for people developing application
not board specific and define clear objective to help board
porting reviews.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
