This commit implements consistency checks for the core registers
in ARMv6-M, ARMv7-M, and ARMv8-M architectures, ensuring that
the user cannot accidentally select registers that are not
implemented by the selected Cortex-M processor.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The commit improves the help text of the ARMV7_M_ARMV8_M_MAINLINE
K-config option.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Newlib uses any RAM between _end and the bounds of physical
RAM for the _sbrk() heap. Set up a user-writable region
so that this works properly on x86.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The hts221 requires 2.2 ms at boot time to download
the flash content into the volatile mem and the
calibration values cannot be read before that.
This issue is causing following crash:
***** USAGE FAULT *****
Executing thread ID (thread): 0x20000234
Faulting instruction address: 0x80037de
Division by zero
Fatal fault in essential thread! Spinning...
Signed-off-by: Armando Visconti <armando.visconti@st.com>
With the introduction of --list-tests to sanitycheck, a few rules have
been added to how to declare test suites.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The disco_l475_iot1 board uses the vl53l0x sensor in XSHUT pin
master control configuration mode. So, it has to explicitly
enable it now.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The XSHUT pin, used to shutdown the device when it is not
in current use, is optional and some boards (like ArgonKey)
leave it tied to vdd. So, the driver must provide a way to
make this part configurable.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
NET_APP settings was missing the device name and enabling the net shell
is nice to verify runtime configuration as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds a Context Synchronization Point immediately
after the reset handler switches to use the Process Stack
Pointer, during initialization.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The current doxygen configuration settings create 4096 folders to hold
the generated HTML output (with names such as d3/ddb/). This makes it
difficult to know what an URL would be for a particular module's
(defgroup's) documentation. By not creating these subdirectories,
module documentation file names become quite predictable:
group__<group name>.html
(e.g., group__sensor__interface.html) allowing us to create
links from the Sphinx-generated documentation into the doxygen-generated
HTML content (this part is under investigation).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Most calls to ztest_assert() contain a message with no trailing
newline. So when it fails, we get (eg:):
starting test - test_multilib
Assertion failed at multilib.c:19: test_multilib: (c not equal to 323)
smoke-test failed: wrong multilib selectedFAIL - test_multilib.
when we'd like to get:
smoke-test failed: wrong multilib selected
FAIL - test_multilib.
among other things, because it is easier to parse for correctness.
So this patch adds a trailing newline to the message instead of going
around trying to police every call site to do it.
print[kf]() is used vs k_str_out() as we need something that is
available also for unit tests. As this is not in any hot path,
performance wise is not such a big deal.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This commit adds the following changes from upstream:
- ed38e895ace ("Increase indent for implicit submenus to 4")
Suggested by Carles Cufí. Makes it easier to see the menu structure
at a glance.
- 1d252b30c77 ("menuconfig: Convert the C locale to a UTF-8 locale for
LC_CTYPE")
Makes Unicode input work on many systems with bad defaults.
Also fixes some interface ugliness, like down arrows turning into
upside-down T's.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Instead of manually iterating all app keys and net keys, use the
bt_mesh_subnet_del() helper on all subnets. This will also clear any
app keys, and ensures that persistent storage is cleared as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Both the local sequence number as well as the Replay Protection List
(RPL) are states that may potentially change very often. In order not
to wear out the flash with these updates it makes sense to try to
avoid too frequent writes.
For the local sequence number a simple solution is not to write the
number on every increment. This patch introduces a new Kconfig option
to define after how many increments the sequence number gets written.
When the stack gets initialized it automatically adds the configured
number to the last stored one, thereby guaranteeing that the node
starts off with a number that's larger than the last used one.
The RPL is more problematic, since in principle it needs to be updated
every single time that we receive and process a message. Especially
security sentitive nodes will want this stored immediately to flash.
To give some use-case dependent flexibility, this patch introduces a
new Kconfig option to specify a timeout after which the RPL gets
written to flash.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These are needed both for bt_mesh_provision() as well as persistent
storage-based network creation.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This variable is both redundant as well as problematic when it comes
to adding persistent-storage-based provisioning information, which
will not come through main.c or the bt_mesh_provision() API. Just
remove it and use bt_mesh.valid which serves the same purpose in
practice.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add APIs for storing core network values, such as Net and App Keys, IV
Index, Sequence number, RPL, etc.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial skeleton for doing settings-based persistent storage for
the mesh network state. This patch only includes restoring some core
network state such as IV Index, Sequence number, Net Keys, App Keys
and the Replay Protection list. The remaining state, and actually
storing the state, is left for follow-up patches.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The sequence number is incremented from several different places in
the stack. The way it was done was potentially race condition prone,
and was also problematic from the perspective of updating the
sequence number in persistent storage. Create a dedicated helper for
incrementing the sequence number (solves the race) which can in later
patches be used to add the persistent storage support.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This for loop runs inside an "if (!sub)" branch, so explicitly setting
sub to NULL in the loop is redundant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These app key and net key (subnet) helpers will soon be needed to be
called from the persistent storage code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Header was missing after merging PR #6970
`Add support for File System multiple instances`
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Group tests under 'Zephyr Tests' and only document the actual tests.
Create cross references to APIs being tested where applicable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a board-level config option to select whether the code gets linked
into internal instruction tightly coupled memory (ITCM), external
hyperflash, or external qspi flash. The default is ITCM.
Note that we are not yet building an image vector table (IVT) into the
image, therefore the zephyr binary is not bootable by the SoC ROM as-is.
However, the DAPLink firmware prepends an IVT to the image when you use
its drag-and-drop feature to program flash, and this results in a
bootable zephyr application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flexspi and semc memory controllers to the i.MX RT SoC. Adds
hyperflash, qspi, and sdram external memories to the mimxrt1050_evk
board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds 8 MB and 64 MB flash size options, which correspond to the two
external flashes (qspi flash and hyperflash) on the mimxrt1050_evk
board. Adds a 32 MB SRAM size option, which corresponds to the external
sdram on the board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Previously, when !CONFI_XIP, BOOTLOADER_SRAM_SIZE was defaulted
to 16 (K), reducing the size of SRAM available for the program.
Also, though it has no effect, the value for SRAM start in the
dtsi file was incorrect.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The API in the current SDK version is rom-patched, and uses
prcm.c code in the driverlib directory.
But, the PRCMMCU3200Init() API call should be prefixed by MAP_
to allow the option to use the ROM API in a future TI SDK version.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Add comments explaining why these three driverlib files need to be
built rather than using the ROM versions.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Previously, a rom.h header was missing from the SDK board porting
file, resulting in some MAP_ API calls not getting vectored to ROM.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The frdm_k64f board document incorrectly listed spi signals on PTCD
pins, which don't exist. They should be on PTD pins.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The loop that checks the MPU region permissions incorrectly
iterates from (num_region + 1) to 1. This should be
(num_region - 1) to 0. This results in the wrong regions
being checked and possible overflow for any implementation
that uses the max region value of 0xFF.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is generating lots of false positives and we keep overriding them
manually, so downgrade and mark it as a warning.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Set FAT FS mount point name as per ELM FAT Library drive
name format.
Add file system specific headers wherever necessary.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add support for multiple instances of a file system by
making use of mount point as the disk volume name which
is used by the file system library while formatting or
mounting a disk.
Also moved out file system specific data structures from
public fs.h header and handled them in corresponding
file system interface files by introducing open files and
open directories concept which is already being used in
NFFS interface module. Now it is extended to FatFs as well.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Assign the appropriate disk name Kconfig option to the
usb mass storage sample test.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add support for enabling multiple disk interfaces (Flash, RAM)
simultaneously in Zephyr by introducing a simple disk interface
framework where we can register multiple disks which would
interface with different storage devices. This would enable us
to have multiple instances of FATFS in Zephyr.
Add support for mass storage drive disk name which will be
used as an argument when calling the disk interface API's.
Enable multiple volumes support configuration in
ELM FAT library.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Extend storage_dev type beyond 'struct device' by changing
the variable type to void pointer. This will be needed if we
have additional transactional layers b/w filesystem and the
actual backend device.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
- Some tests start with test_, some do not, so make sure we parse both.
- Parse skipped tests
- Improve handling of test case identifier
- Handle Exceptions in device handler
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
