With recent changes to libmetal we can now include and build it directly
as a zephyr library rather than doing a recursive make. We remove
ext/hal/libmetal.cmake as part of this change and introduce a Kconfig
option for libmetal.
This is a partial fix for issue #7673.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pull in a slightly more recent version of libmetal with changes
to the build system to improve integration with Zephyr. This change
will break anything that builds with Zephyr and libmetal (which at this
point is only the open-amp example). Will fix that shortly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
libmetal itself isn't an ipc library, its a generic HAL abstraction
library so move it into ext/hal where it belongs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When the RTC support get added we had a select on HAS_RTC, however this
Kconfig symbol didn't exist. Clean this up to match the pattern of
HAS_MCUX_RTC. The driver now depends on that and the SoC selects it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The {FLASH,SRAM}_BASE_ADDRESS Kconfig symbols were removed in commit
311e6b9e3e ("arch: arc: Use DTS for all ARC SoCs"). These settings are
supposed to come from DTS now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
gdb_server was removed in commit 0f669132a0 ("kernel: remove
gdb_server"), but still has a testcase that sets CONFIG_GDB_SERVER=y,
and some code in arch/x86/debug.
Remove the leftover parts. This also gets gets rid of undefined
references to the CONFIG_GDB_SERVER symbol.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_GROVE_TEMPERATURE_SENSOR_V1_1 never existed.
CONFIG_GROVE_TEMPERATURE_SENSOR_V1_X has help text "Version 1.1 or 1.2".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This symbol was removed in commit 33118f9212 ("sensor: grove: use
global sensor init priority"), which switched over to using
CONFIG_APPLICATION_INIT_PRIORITY.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some code was developped around MPU support in ealy stage
of feature introduction. This code was gated under MPU_ENABLE
flag which does not exist and hence code has never been
enabled nor tested.
Since there has been futher MPU development since then, it seems
safer to simply remove that code and associated Kconfig symbols
to avoid that someone starts using it while it was not part of
MPU development track.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
USB IP is not directly available on disco_l475_iot1 and requires
some HW modifications to get it enabled.
Remove this USB pinmux configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In stm32 clock_control driver, Kconfig symbol CLOCK_STM32_PLL_PREDIV1
in stm32f3 series was set as conditional on the activation of some
specific STM32F3 SoCs that are not supported yet in Zephyr.
Remove this flag.
In order not to loose a rather studious part of code, comment it out
and set a TODO to specify how to re-enable it once it will be
required.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
During transition from native to ll based clock_control
driver, a typo was introduced in PPL source selection flag.
Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The support for Galileo board is bitrotted as the config file
contains obsolete values. As testing this old board is difficult
lets remove the config files. These can be re-introduced with
proper and tested settings if needed.
Fixes#7814
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Zephyr code routinely assumes conventional ILP32/LP64 integer
behavior, and occasionally relies on it to perform some nice tricks.
This is despite the fact that this behavior (while pervasively adopted
and in use on all architectures we care about supporting) isn't
actually guaranteed by the language standard which allows much looser
semantics than actual exist on hardware.
Put it into the intmath section of this test as a build time thing.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We generalize querying the entropy driver directly with
a new internal API, which is now used by CONFIG_STACK_RANDOM
and stack canary initialization.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This section got added in commit 470349c25a ("Bluetooth: settings:
Add support for per-submodule handlers"), but sanitycheck didn't know
about it and was whining.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add requirement ID place holders based on APIS. The requirements will
appear as a list in doxygen documentation. The IDs will be expanded with
more details somewhere else, probably a requirement catalog on GH or
some other requirement management tool. This is still TBD.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add special command @req to reference requirements. This will help with
traceability between tests and requirements using doxygen.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There is no pinmux_dw.c and not Kconfig symbols associated with
CONFIG_PINMUX_DW, so remove the references to them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename CONFIG_RNDIS_TX_BUF_* to CFG_RNDIS_TX_BUF_* and rename
CONFIG_RNDIS_CMD_BUF_* to CFG_RNDIS_CMD_BUF_*. The CONFIG options where
not exposed in Kconfig so limit use of CONFIG_ to Kconfig only symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename CONFIG_PMS7003_SERIAL_TIMEOUT to CFG_PMS7003_SERIAL_TIMEOUT as it
was not exposed in Kconfig as a configurable option. So don't use the
CONFIG_ prefix for non-Kconfig symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_DEBUG_IP_BUFS was commented out but specified in galileo
specific conf files. The Kconfig symbol doesn't exist so lets remove
it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We haven't ever really had a Kconfig symbol to enable the support
related to DEBUG_SECTION_MISMATCH. Thus this isn't really used by
anyone and we will remove it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In the code we had an if defined based on
CONFIG_BMM150_MAGN_SAMPLING_RATE_RUNTIME that should have been
CONFIG_BMM150_SAMPLING_RATE_RUNTIME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In the code we had an if defined based on
CONFIG_ATAES132A_I2C_SPEED_STANDARD that should be
CONFIG_CRYPTO_ATAES132A_I2C_SPEED_STANDARD.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The defconfig has CONFIG_SOC_MKL25Z=y, however CONFIG_SOC_MKL25Z doesn't
exist and should have been CONFIG_SOC_MKL25Z4, However its not
necessary to define this at all since it implied by the board.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
