This patch includes:
STM32F7 family device tree file with basic and UART definitions.
STM32F746 subfamily device tree file.
Memory definitions for STM32F746xG subfamily.
Signed-off-by: Yurii Hamann <yurii@hamann.site>
The patch adds serial driver support for STM32F7 family
microcontrollers, includes pinmux definitions and DTS fixup file.
Signed-off-by: Yurii Hamann <yurii@hamann.site>
Instead of storing a bt_addr_le_t, just store a pointer to the bt_conn
object (which is what the code is interested in anyway). This way the
user data size requirement drops from 7 to 4, which is the default
that all current users are happy with.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Configuration Model specification states that all non-unicast
addresses given as the address of an element are Prohibited. The
correct action for Prohibited parameter values is to ignore the
message. As of writing this patch the PTS does not enforce this, but
it might in the future (as it does for many other Prohibited values).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Previously the code only checked if any of the models within an
element had the destination address in their subscription list. After
that check the specific model that the message was addressed to was
not verified to have that address in it's subscription list. This
patch fixes the problem.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that for any of the removed properties though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Enable HAS_SEGGER_RTT to allow user to select use of SEGGER RTT
and SystemView solution.
SEGGER provide a firmware that can convent ST-Link to J-Link,
And RTT is supports all stm32 SoCs, so lets enable RTT default
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Introduct the ways to debugging and downloading using JLink tools on
stm32 boards if had convented ST-Link On-Board into a JLink.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Segger provide a firmware makes the ST-LINK on-board compatible with
J-Link OB, allowing users to take advantage of most J-Link features
such as RTT(Real Time Transfer).
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
* We are now *much* better at not reserving unnecessary
system MPU regions based on configuration. The #defines
for intent are now an enumerated type. As a bonus, the
implementation of _get_region_index_by_type() is much
simpler. Previously we were wasting regions for stack guard
and application memory if they were not configured.
* NXP MPU doesn't reserve the last region if HW stack
protection isn't enabled.
* Certain parts of the MPU code are now properly ifdef'd
based on configuration.
* THREAD_STACK_REGION and THREAD_STACK_USER_REGION was a
confusing construction and has now been replaced with
just THREAD_STACK_REGION, which represents the MPU region
for a user mode thread stack. Supervisor mode stacks
do not require an MPU region.
* The bounds of CONFIG_APPLICATION_MEMORY never changes
and we just do it once during initialization instead of
every context switch.
* Assertions have been added to catch out-of-bounds cases.
Fixes: #7384
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit correct the issue introduce by aee97be which
changed the order of header inclusion that lead
to warning generation at compilation, that truend into errors
in CI.
This commit reinstantiate the initial header inclusion order.
Fixes#8563
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Update Cube version for STM32L4XX family
from version: V1.10.0
to version: V1.12.0
This version solves patch in drivers/include/stm32l4xx_ll_spi.h
Note: git shows 100% diff on all files.
You need to tick "Ignore space change" in git UI to see real
differences. I tried different things to fix this without
success (dos2unix, file encoding, files access right).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update Cube version for STM32F7XX family
from version: V1.8.0
to version: V1.11.0
Note: git shows 100% diff on all files.
You need to tick "Ignore space change" in git UI to see real
differences. I tried different things to fix this without
success (dos2unix, file encoding, files access right).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update Cube version for STM32F3XX family
from version: V1.9.0
to version: V1.9.1
Fixes both patches:
- Wrong LSI value
- Issue in LL_SPI_TransmitData16
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update Cube version for STM32F1XX family
from version: V1.6.0
to version: V1.6.1
Note: git shows 100% diff on all files.
You need to tick "Ignore space change" in git UI to see real
differences. I tried different things to fix this without
success (dos2unix, file encoding, files access right).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
External projects might run check-compliance.py from a subdirectory,
while list_undef_kconfig_refs.py expects to find the top-level Kconfig
file in the current directory.
Due to obscure Kconfig ugliness (explained in a comment), the working
directory needs to be changed here, instead of using 'srctree'.
(Thinking of changing that Kconfig behavior so that it only applies to
.config files. Suspect it's been a bug in the C tools all along for
Kconfig files.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is needed to avoid compilation warnings when using both the
built-in libc and newlib.
The warnings were caused by typedefs incompatibilities.
This was agreed to be the temporary solution at the TSC.
See #8469 for more details.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The warnings were fixed by commit c4123643b5 ("tests: fp_sharing:
Extract x86 configs to separate .conf").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Exclude building the btshell and mesh_shell application for
NRF52810_PCA10040 boards due to limited RAM and Flash
availability on the nRF52810 SoC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The nRF52810 is a low-cost variant of the nRF52832, with a reduced set
of peripherals and memory. This commit adds Bluetooth controller support
for it.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The subsys/net/ directory is more logical place for L2 code instead
of ip/ directory. No functionality changes by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we're reading the initial state from flash, calling the various
internal functions was leading to scheduling a rewrite to flash. Add
an extra parameter to the appropriate functions so they know when
they're called due to active configuration by a configuration client,
and when they're called due to restoring the state from flash.
This was not only wasting flash space, but also causing erroneous
behavior with the FCB settings backend if there was an intermediate
node reset operation stored, followed by a reprovisioning. The node
reset entries would cause them to be re-appened after the second valid
provisioning, leading to an incomplete node state.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the model publication is not enabled, we should return success,
however no other steps need to be done. This also helps avoid writing
redundant entries to flash when resetting a node that never had model
publication enabled.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There were several things broken with the initialization order during
node reset:
- The model->flags should not be touched since the writing to
persistent storage happends through delayed work, and the flags
need to be kept until that.
- The unprovision() function should only be called at the very end of
the reset procedure, since it calls model-specific init functions
which may clear things which the earlier reset routines depend on.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bcdUSB has been previously updated from 1.1 to 2.0 in default
device descriptor, but not in DFU class. After USB bus reset
performed by dfu-util, alternative descriptor is registered
with bcdUSB set to 1.1. This mismatch causes communication failure.
DFU descriptor's bcdUSB has been updated to match default one.
Relates to #7570
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Provide flexibility in choosing to use the host defined crypto
functions or the ones provided by the controller
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds an Kconfig option to disable GATT Multiple Read support.
This GATT sub-procedure is optional and does not have to be supported.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This function does nothing actually if SMP is disabled.
This excludes att_signed_write_cmd handler from build if BT_SMP
is disabled or BT_SIGNING is disabled.
Note:
BT_SIGNING depends on BT_SMP
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This chunks should be excluded from build if the target application
does not support neither observer not central role.
This helps to reduce the application image size that implement
Peripheral or Broadcaster role.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds dependency upon BT_BROADCASTER and BT_OBSERVER roles.
Those are necessary to implement Mesh device.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Don't build the code that is related to central role if the target
does not support connection creation.
This helps to reduce the application image size that implement
either Observer, Peripheral or Broadcaster role.
Note:
BT_CENTRAL implies BT_CONN and BT_OBSERVER
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The test verifies that the mock framework can handle functions
under test which call more than one mock function, and
correctly processes each call.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Calling __builtin_ffsl(neg_bitmap) returns first bit set in the word,
e.g. 4 if bitmap is 11111000. As this must translate to zero-based index
3, one must be subtracted from the result.
Signed-off-by: Morten Priess <mtpr@oticon.com>
VERBOSE if set to any value enables verbose build output,
setting to 0 does not have the intended effect.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
