The issue was that the length field of the tlv extension in the sync
follow up packets was wrong. It is supposed to skip the length of the
header of that extension. The easiest fix was separating the header and
the actual contents into separate structs and that's what this commit
does.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
As the PTP clock should return the correct time, use that
instead of zephyr uptime for time as that has only ms accuracy.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use priority 3 (critial app) for outgoing event messages (Sync,
Pdelay_Req and Pdelay_Resp). Use priority 6 (Internetwork Control)
for all other outgoing packets.
See IEEE 802.1Q chapter 8.4.4 for more details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed TID implementations wherever it is not required as per
Bluetooth SIG Mesh Model Specification. Removed unnecessary
comments. Add status code value to get publish along with
Light Lightness range status message.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Update message handlers & correct nubmber of bytes that every
handlers should fetch for their further processing as per
Bluetooth SIG Mesh Model Specification.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Split meaning of BT_CTLR and BT_LL_SW, since they always are the same.
This way BT_CTLR means that there an controller implemented,
and BT_LL_SW refers to the specific implementation.
This allows alternative controller implementations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Split out definition of net_app_init() and its parameter flags from
net_app.h header to new net_config.h header. As we do this, rename
the function to net_config_init() and flags to NET_CONFIG_NEED_*.
This is a second step in splitting out network configuration API
out of net_app API, started in the c60df1311 commit.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There is no link address for Dummy network technology, so check
that before trying to print link address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. API function: uart_nrfx_irq_tx_enable is expected to enable and
trigger TXDRDY interrupt. Due to HW limiation before first byte has
been sent TXDRDY interrupt will not be triggered so it must be forced
by the software.
2. Common function: uart_nrfx_irq_tx_ready_complete is used for two
API entries: irq_tx_ready, irq_tx_complete because Nordic hardware does
not distinguish between them. This function returns 1 when driver is
ready to accept data and 0 otherwise.
3. Removed Hungarian prefixes.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Uncovered by clang we have some functions being only used conditionally,
so gaurd them to make them only available when those conditions are met.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add an LLVM backend and a clang toolchain variant to support building
with llvm coming with popular Linux distributions.
This has been tested with X86 boards:
- quark_d2000_crb
- quark_se_c1000_devboard/Arduino 101
Use:
export ZEPHYR_TOOLCHAIN_VARIANT=clang
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds an explanatory comment in all soc.h headers,
where kernel_includes.h header has been included, to stress out
that this header must be included after SOC-specific headers are
brought in. The reason is the fact that kernel_includes.h needs
the ARM CMSIS definitions, which are brought in by the
SOC-specific header inclusions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Introduce TC_RESULT_TO_STR to convert from an integer test result to a
string like "PASS", "FAIL", "SKIP". Do this to remove the defines of
PASS/FAIL/SKIP since those names might get used by other code and to
have a single consistent way of doing the conversion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The stm32f7 version of soc.h misses the changes done in commit
aee97be710 ("arch: arm: soc: remove core zephyr header inclusions
from soc.h") as it was not merged at that time. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When we enabled SEGGER support on the ST SoCs we now how some systems
with really small amounts of memory that the sample can't be built for.
Set a min_ram to exclude such systems.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This allows zephyr to listen LLMNR DNS queries sent by Windows
and respond to them. See RFC 4795 for details.
The feature requires that hostname is set properly to the
zephyr device and LLMNR is configured properly.
Typically following config options are enough for this support:
CONFIG_NET_HOSTNAME_ENABLE=y
CONFIG_NET_HOSTNAME="zephyr-device"
CONFIG_DNS_RESOLVER=y
CONFIG_LLMNR_RESPONDER=y
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By default the LLMNR is disabled in this sample. You can enable
it by setting CONFIG_LLMNR_RESOLVER=y
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This implements LLMNR client from RFC 4795. This means that caller
is able to resolve DNS resource records using multicast DNS.
The LLMNR is used in Windows networks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
An ARP entry, if not free, will be either in pending list or in the ARP
table. What differentiate both is the type of data they hold: either a
pending packet or an actual ethernet address.
It is then possible to unite these 2 attributes to save 4 bytes
per-entry.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Until now, each ARP entry had a k_delayed_work to be used as a timer
when the ARP entry is a pending one, waiting for the ARP request to
succeed in order to get to the ARP table.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
ARP request timer by having one central k_delayed_work and a timestamp
in every ARP entry properly handled at every timeout (1+ entry might
have reached the timeout then).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of looping over the entries array, which will keep the same
order, let's use slist: one for free entries, one for pending ones and
finally one as the actual ARP table.
This permits some optimizations in how to look up and making small
heuristics by changing entries order when it seems relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Configure BlueNRG in controller w/o host.
By disabling 'HCI_reset' via the quirk, we can request to
BluesNRG hardware to be on controller mode just after it is ready.
By the way it's no necessary to manage a 'HCI_reset' when BluesNRG are
initialised (and on controler mode).
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
MSI clock signal can be selected in several ranges.
These ranges should be taken into account for calculating its
frequency and hence global system frequency.
Provide a Kconfig option to set MSI range.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
According to BlueNRG-MS ref manual, SPI master shoul read from
controller as long as IRQ pin is high.
Introduce a new loop within spi_rx_thread to do so. Since
it is now possible to enter read loop with nothing to read, set
a max attempts limit to be sure to exit the loop.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Adding new implementation of logging subsystem. New features
includes: support for multiple backends, improving performance
by deferring log processing to the known context, adding
timestamps and logs filtering options (compile time, runtime,
module level, instance level). Console backend added as the
example backend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This test is failing for the frdm platform because
the ADC_DEVICE_NAME is different. Add #if statements
to correct for respective platform names.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
GCC 7 and newer are smart enough to realize that in test_snprintf()
the output will not fit in 0 or 4 bytes, but that it requires 9.
So it throws a warning in compile time. But in this case we are
actually testing that snprintf's return value is what it should be
while truncating the output. So let's suppress this warning here.
Fixes: #5732
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
