Add set functions for codec capability, to set all
assigned number values in the bt_audio_codec_cap
struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the tests for invalid bt_bap_broadcast_source_get_base
parameters and state, as those tests now implemented as unit tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the tests for invalid bt_bap_broadcast_source_get_id
parameters and state, as those tests now implemented as unit tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit eb44414af9 modified
test_single_read for early rx buf release.
The commit assumed that tdata.last_rx_buf points to either &tdata.rx_buf[0]
if the driver releases the first buffer or at &rx_buf[5] if the first
buffer is not released. However, where tdata.last_rx_buf points to depends
on the timeout given to uart_rx_enable(), making the test flaky.
This commit modifies the test by keeping track how many bytes have been
received in the first and second buffers.
The function tdata_check_recv_buffer() validates that the sent data
matches the received bytes which may have been split between first and
second buffer.
This fixes the uart_async_api test on the xmc45_relax_kit.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
On the STM32H735G-DK Discovery kit, when connecting a UART from
pin PF7 to PF6, the test uart_async_api passes now.
Signed-off-by: Benjamin Deuter <benjamin.deuter@gmail.com>
Support NXP MRT on LPC55XXX SOC series, enable on
lpcxpresso55s69_cpu0, add test overlay to counter basic api test
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The FMADD, FMSUB, FNMSUB and FNMADD instructions occupy major opcode
spaces of their own, separate from LOAD-FP/STORE-FP and OP-FP spaces.
Insert code to cover them.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Remove the `app.overlay` file which has been
wrongly added in ad3c5a2 commit. Instead of that
add the ad5592-adc node into `native_posix.overlay` file.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Relocate new and existing internal software-managed table
access functions from the public `sw_isr_table.h` into a
private header that should only be accessed internally.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Validate the following functions in the sw_isr_table:
- z_get_sw_isr_table_idx
- z_get_sw_isr_device_from_irq
- z_get_sw_isr_irq_from_device
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Twister treats board revisions as separate boards, so s32z270dc2_r52
revision D must be added to the filters.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Adds a new test for ARM Cortex-M architectures with the
CONFIG_ARM_CUSTOM_INTERRUPT_CONTROLLER option enabled.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
Add basic support for ams TSL2561 light sensor. Triggers, attributes
and manual integration time are currently not supported.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
PR allows to get rid of tinycrypt objects from
the final binary of the ble mesh apps based on
PSA TFM crypto.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Further reduce code duplication by moving test code for similar test
cases into a helper function, parametrized based on the test case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move code responsible for net context initialization, repeated over
multiple test cases, to a helper function to reduce code duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Modify internal L4 protocols APIs, to allow to enforce checksum
calculation, regardless of the checksum HW offloading capability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Modified the BabbleSim test for the Bluetooth test under the
host/privacy/peripheral category. Added the RPA check in the scan
callback context of the scanning tester device to validate if the
DUT advertising address is correct.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Extended the scope of the BabbleSim test for the Bluetooth test under
the host/privacy/peripheral category. The tests ensures correct RPA
advertising after the system a reboot when the Bluetooth identities
are preloaded from the Settings subsystem.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added initial version of Infineon AIROC WIFI driver
Added initial version of binding file for Infineon AIROC WIFI
driver
Rename CONFIG_ABSTRACTION_RTOS_COMPONENT_ZEPHYR to
CONFIG_USE_INFINEON_ABSTRACTION_RTOS
Exclude cy8cproto_062_4343w platform from
drivers.modem.esp_at.build test
Change revision hal_infineon to
69c883d3bd9fac8a18dd8384624b8c472a68d06f
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Moves the USB CDC device to the USB CDC port instead of wrongly
using the serial port, this was not used but is needed to prevent a
build error added to MCUboot which prevents using the same device
for console and serial recovery chosen nodes
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This is the first patch with the goal of establishing a common library
for Bluetooth utilities that are commonly used for setup in Bluetooth
Host tests. The ultimate goal is to remove redundant (near) copies of
these utilities and other more ad-hoc solutions.
This patch moves one instance of testlib (from
tests/bsim/bluetooth/host/att/long_read) to
tests/bluetooth/common/testlib and makes it a proper CMake library.
The long_read test is updated to link to the new CMake library.
Further changes and de-duplication will come in later patches.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Added an additional check before failing a BSIM test
on ISO error, so that when we stop the broadcast source
(after the sink have received the expected data), lost data
does not trigger a test failure.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adjust the reg of the CS gpios to fix the warning
about the same value used for all existing nodes.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Implement testcases for Information Reporting Interface [300-399]:
* LightweightM2M-1.1-int-301 - Observation and Notification of parameter
values
* LightweightM2M-1.1-int-302 - Cancel Observations using Reset
* LightweightM2M-1.1-int-304 - Observe-Composite Operation
* LightweightM2M-1.1-int-306 – Send Operation
* LightweightM2M-1.1-int-307 – Muting Send
* LightweightM2M-1.1-int-308 - Observe-Composite and Creating
Object Instance
* LightweightM2M-1.1-int-309 - Observe-Composite and Deleting
Object Instance
* LightweightM2M-1.1-int-310 - Observe-Composite and modification of
parameter values
* LightweightM2M-1.1-int-311 - Send command
303 and 305 cannot be implemented using Leshan as it only support
passive cancelling of observation.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When testcases share one DUT per module, we save the time
from running bootstrap on each testcase.
Each testcase start with DUT that is registered.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement support for reading stream of events from Leshan.
This allows testing the LwM2M SEND/Notify/Update operations
and reading content of those.
Also convert the whole Leshan class to use requests.session() so
it pools up connections and uses keep-alive.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add remaining test cases from
Device management & Service Enablement Interface
* LightweightM2M-1.1-int-222 – Read on Object
* LightweightM2M-1.1-int-223 – Read on Object Instance
* LightweightM2M-1.1-int-224 – Read on Resource
* LightweightM2M-1.1-int-225 – Read on Resource Instance
* LightweightM2M-1.1-int-226 – Write (Partial Update) on
Object Instance
* LightweightM2M-1.1-int-227 - Write (replace) on Resource
* LightweightM2M-1.1-int-228 - Write on Resource Instance
* LightweightM2M-1.1-int-229 - Read-Composite Operation
* LightweightM2M-1.1-int-230 - Write-Composite Operation
* LightweightM2M-1.1-int-231 - Querying basic information
in SenML JSON format
* LightweightM2M-1.1-int-232 - Querying basic information
in SenML CBOR format
* LightweightM2M-1.1-int-233 - Setting basic information
in SenML CBOR format
* LightweightM2M-1.1-int-234 - Setting basic information
in SenML JSON format
* LightweightM2M-1.1-int-235 - Read-Composite Operation on root path
* LightweightM2M-1.1-int-236 - Read-Composite - Partial Presence
* LightweightM2M-1.1-int-237 - Read on Object without specifying
Content-Type
* LightweightM2M-1.1-int-241 - Executable Resource: Rebooting the device
* LightweightM2M-1.1-int-256 - Write Operation Failure
* LightweightM2M-1.1-int-257 - Write-Composite Operation
* LightweightM2M-1.1-int-260 - Discover Command
* LightweightM2M-1.1-int-261 - Write-Attribute Operation on a multiple
resource
* LightweightM2M-1.1-int-280 - Successful Read-Composite Operation
* LightweightM2M-1.1-int-281 - Partially Successful Read-Composite
Operation
Modify tests binary
* Allow CoAP payload of 1211 bytes.
* Allow outgoing messages to use block-wise if they are bigger.
* Use 4kB encode buffer for outgoing messages.
* Check configured heap and stack sizes.
* Limit number of interface addresses, sockets and contexts
Qemu-cortex-m3 platform ran out of RAM, so reconfigure it to use
* packet size of 256 bytes.
* encode buffer of 2kB
This exercises the block-transferring on some of the test cases.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
