Check for COMPILER_ISA_THUMB2 rather than CPU_CORTEX_M when determining
if special handling is required for thumb instructions.
This prevents false negative results on Cortex-R devices that may
generate a fault (test pass) even if the MMU/MPU is not configured
correctly.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
Building with Zephyr SDK 0.16.5 revealed a minor bug with the buffer
size provided to snprintk():
specified bound 38 exceeds destination size 20 [-Wstringop-overflow=]
As we provide the buffer to snprintk() with an offset, the actual
buffer size should be reduced by that offset value.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This test does not use any APIs beyond those provided in the Zephyr
standard set, so it should not define _POSIX_C_SOURCE.
Signed-off-by: Keith Packard <keithp@keithp.com>
This commit updates the definition of z_shared_isr_table_entry
to use _isr_table_entry instead of specially created z_shared_isr_client.
Signed-off-by: Radosław Koppel <radoslaw.koppel@nordicsemi.no>
Sets up memory partitions and allows for the partitions to be added to a
memory domain after loading an extension. This allows for applying
memory protection attributes to all of the needed memory regions an
extension requires to execute code correctly.
Currently only works when usermode is enabled as otherwise memory
protection APIs are unavailable.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Similar to nRF54L15, the MDK files in HAL for this SoC are not
compatible with C++98, so currently the test cannot be performed
on this SoC.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Different set of IRQ lines need to be used for this SoC and the CLOCK
IRQ is not to be installed in the vector table.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Expand the babblesim tests for LE audio to verify that all the
discovery functions can be called multiple times without error.
HAS is an exception as that has an existing separate check
that disallows discovery multiple times.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The LE Audio implementations do not really support bonding yet,
and removing subs on disconnect is the most effective (and correct)
way of ensuring that we do not subscribe more than once when we
re-discover after reconnection.
The broadcast assistant and the media control client does not
support multiple connections as of this commit, so they needed
special treatment. In the case that we do discovery on multiple
ACL connections, it is important that the existing subscriptions
are removed correctly by calling bt_gatt_unsubscribe.
In order to implement this change properly on some of the clients,
thet had no proper connection references or support
for clearing the data on disconnects, they had to be updated
as well.
The csip_notify.sh test has been disabled, as that expected a
notification in the client, but since this commit removes that
(until bonding is properly supported in the clients), then the
test will fail.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Several places the LE Audio clients called bt_gatt_subscribe without
checking the return value, which could cause some issues in the worst
case, and in the best case, cause some unexpected behavior.
Some implementations had a bit more updating to handle the new
behavior.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit adds support for NXP board LPCXpresso55S69 for mbox.
- samples/drivers/mbox/ - mbox signaling mode
- samples/drivers/mbox_data/ - mbox data transfer mode
- tests/drivers/mbox/mbox_data/ - mbox test to verify functionality.
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
This change makes the optional procedures in the Media Control Client
optional and configurable through Kconfig.
Signed-off-by: Ping Wang <pinw@demant.com>
Implement tests for `sched_rr_get_interval()` .
Function is actually placeholders and just return `ENOSYS`
since Zephyr does not yet support processes or process scheduling.
signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
Add test case which verifies that ICMP probing work as expected for the
DHCPv4 server. Make sure we build tests with both, probing enabled
(default) and disabled (enforced in testcase.yml) to make sure the
server is functional regardless of the probing feature.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In twister, we do not include the ZTEST testsuite as part of the
identifier, something we should start doing especially for tests with
multiple suites. The issue happens with same testcase name in different
suites, where results get messed up.
Work around this for now by making the testcase names unqiue until we
have a better solution twister.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The DMA is already enabled for this board, but updating the board doc
page to make that clear, and enabling the DMA loop_transfer test.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Some of the CSIP tests take a while to run given the number of
devices, and some of them started to fail in CI because of a
timeout, so we increase the EXECUTE_TIMEOUT a bit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
[Description]
tests: shell: Restart bt will register the same connection callback twice.
Callback next node point to itself, when link established callback function
loop infinitely.
[Fix]
Unregister the previous callback to avoid register repeatedly.
[Test]
After bt init/disable times, create connection successfully.
Signed-off-by: huajiang zheng <huajiang.zheng@nxp.com>
Where extended advertising is restablished through the use of
recycled() callback, registers over bt_conn_cb_register().
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Extend macros from creating a PM device with an optional argument
which indicate whether type of device is ISR_SAFE or not.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The get_val functions will now return -ENODATA in case that
a value isn't found, instead of 0.
This makes them more similar to the meta_get_val functions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
bt_pbp_parse_announcement was defined as uint8_t return value function,
but returned errno values, so it was modified to return an int instead.
The return values are also now more granular and documented.
The function also triggered a coverity issue with the way that it
parsed the data->data, as it would be marked as tainted. This should
be fixed by using the net_buf_simple API, which also improves on
some other parts of the code.
Finally the meta argument for the function was changed from an
unknown sized buffer, where the caller somehow had to know the
size of the metadata before calling the parsing function, to
an output pointer. This also omits the requirement for the
caller to always copy the metadata, where now it just
gets a pointer to the metadata in the bt_data struct. The application
can now always decide whether to continue to parse the metadata or
to copy it, using the pointer and the return value of the function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Simple rename of node label from test_dma to tst_dma to avoid conflicts
and confusion about the test_ prefix when parsing test results in
twister.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The next commit will change the behavior of `bt_buf_get_evt` to no
longer use `bt_buf_get_cmd_complete`. We have to remove the test that
would prevent this.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Convert ili9xxx display drivers to use MIPI DBI API. Due to the fact
this change requires a new devicetree structure for the display driver
to build, required devicetree changes are also included in this commit
for all boards and shields defining an instance of an ili9xxx display.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The LIS2DE12 is an ultra-low-power high- performance three-axis
linear accelerometer belonging to the “femto” family with digital
I2C/SPI serial interface standard output.
This driver is based on stmemsc HAL i/f v2.3
https://www.st.com/en/datasheet/lis2de12.pdf
Signed-off-by: Armando Visconti <armando.visconti@st.com>
remove pci bus compatible id dependency from qemu platforms overlay
files for disk and ivshmem test apps. This already provided as part of
respecitve board dts files and hence no need to duplicate here.
Signed-off-by: Najumon B.A <najumon.ba@intel.com>
This commit introduces a new IPv6 API for positive reachability
confirmation, as specified in RFC 4861, Section 7.3.1. This feature aims
to enhance the effectiveness of the Neighbor Discovery mechanism, by
enabling upper-layer protocols to signal that the connection makes a
"forward progress".
The implementation within TCP serves as a reference. Compliance with
RFC 4861, especially Appendix E.1, was ensured by focusing on reliable
handshake and acknowledgment of new data transmissions.
Though initially integrated with TCP, the API is designed for broader
applicability. For example, it might be used by some UDP-based protocols
that can indicate two-way communication progress.
Signed-off-by: Łukasz Duda <lukasz.duda@nordicsemi.no>
Implement tests for `sched_setparam()` and `sched_setscheduler()` .
Both functions are actually placeholders and just return `ENOSYS`
since Zephyr does not yet support processes or process scheduling.
signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
