This can be useful if application developers
want to print them in the applications.
Later we can also use them in
the host to improve debuggability.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The function reuses the ATT implementation.
To make the function simpler to use, the function handles both positive
and negative values.
Unfortunately the APIs do not document if the API returns an
errno val or a GATT return value.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This API converts a SMP error code to a string.
This can be useful if application developers want
to print them in the applications.
BT_SMP_ERR_SUCCESS was added for completeness.
Later we can also use them in the host to improve debuggability.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This can be useful if application developers
want to print them in the applications.
Later we can also use them in
the host to improve debuggability.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The Renesas RA ICU forcibly enables GEN_ISR_TABLES, and it remains
enabled even if it is disabled in prj.conf.
Adding `not CONFIG_GEN_ISR_TABLES` to the filter condition to skip
this case.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Commit aligns usage mesh and host PSA.
Since PSA crypto is supported in host then
there is no reason to switch off some of host
features to get rid of tinycrypt functions in
the final image.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Reduce the spi1 clock freq to pass the testcase on the nucleo
_h753zi or nucleo_h743zi boards
Connect D11 & D12 pins on the board to pass the test
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Running the tests/subsys/lorawan/clock_sync/ requires a long timeout
to pass. Set a timeout: 500 to cover most of the usecase
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add google_dragonclaw board definition and allow running the
drivers.counter.basic_api.stm32_subsec test on the board.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add helper function which calculates the required calibration to
1 Hertz from the actual frequency of an RTC. This helper is both
functional and adds to the documentation of the RTC calibration
API.
The rtc.h header now includes zephyr/kernel.h instead of
zephyr/types.h as __ASSERT_NO_MSG is now referenced in the header.
The commit additionally extends the rtc_api_helpers test suite
with a test to validate the conversion function itself.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
These Kconfigs should have been deprecated for more than 2
releases, remove them:
- `CONFIG_CPP_MAIN`
- `CONFIG_CPLUSPLUS`
- `CONFIG_LIB_CPLUSPLUS`
- `CONFIG_EXCEPTIONS`
- `CONFIG_RTTI`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`CONFIG_LOG_DOMAIN_ID` has been deprecated for years and
shouldn't be used according to its documentation, remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`CONFIG_BT_DEBUG_LOG` has been deprecated for more than 2
releases, replace it with `CONFIG_BT` + `CONFIG_LOG`:
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Check for ENOTSUP on alarm callback test if ALARM functionality is
enabled but callbacks are not supported
Signed-off-by: Jakub Topic <jakub.topic@anitra.cz>
Printing event name during event processing caused unexpected delays on
slower platforms, making the tests fail. As according to the tests
author those prints were unintentional leftovers, just remove them.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fill-in the mode field of the fd_entry so that the
implementation can be made aware that the specific file
descriptors created are sockets.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Added check if ccc_values[i].attr != NULL,
before accessing to ccc_values[i].attr structure:
(handle == ccc_values[i].attr->handle)
On 20829 platform it's causing hard fault, not sure about
another platforms (in GAP testing).
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
These three sensor types are all largely compatible. The SHT21 and
HTU21D can be supported by this driver by sending command 0xE3 instead
of 0xE0 to read the temperature.
Mention the sensor names in bindings and Kconfig to help those looking
for support to find it. There have been at least five PRs attempting to
add SHT21 and/or HTU21D support that did not realize the Si7006 is the
same.
As mentioned in PR #22862, the Sensirion SH21 is the original. The dts
bindings are adjusted (in a backward compatible way!) to make the sht21
the base binding and si7006 is derived from that.
Examples of dts compatibles:
TE Connectivity née Measurement Sepcialties HTU21D:
compatible = "meas,htu21d", "sensirion,sht21";
Sensirion SHT21:
compatible = "sensirion,sht21";
Silicon Labs Si7006
compatible = "silabs,si7006";
Silicon Labs Si7021
compatible = "silabs,si7021", "silabs,si7006";
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
The mspi flash test is intended to test mspi flash device driver
implementation on MSPI bus. The test requires the device to have at
least two sectors of memory with MSPI_FLASH_SECTOR_SIZE as size.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
Add a MSPI controller API test and run on native_sim board.
The API implementation within mspi_emul.c is the test target.
The stub device emulator is added for convenience to test controllers.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
Add the ability to touch memory in the opposite direction from one loop
to the next so to exercize the LRU eviction algorithm.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
In 0be0d2175b (cmake: modules: extensions: Revert using common
board files), the overlay for `native_sim/native/64` in the settings
functional file test was not recreated. Duplicate the overlay used for
the `native_sim` target to support this test correctly.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add SENSOR_ATTR_ALERT and SENSOR_ATTR_HYSTERESIS attributes support.
The code is heavily inspired by the one for lm77 sensor.
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
Clean up register addresses for devices defined as children of the dummy
SPI bus, so that they start from zero. This ensures all SPI chip select
gpio indices will be used
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Convert galaxycore GC9X01 to MIPI DBI API. In tree boards and tests
using this display have also had their devicetrees updated to use the
new MIPI DBI SPI emulated device.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
As part of ongoing work to move away from TinyCrypt and towards PSA
(#43712), introduce a PSA option and remove the TinyCrypt one for the
SHA-256 implementation.
The Mbed TLS implementation is modified to use `mbedtls_sha256`
directly for smaller code size.
As of now the implementation defaults to PSA only if TF-M is enabled
because a dependency loop happens if using `PSA_CRYPTO_CLIENT` as a
condition in `FLASH_AREA_CHECK_INTEGRITY_BACKEND`.
A test case is added for the PSA implementation, and an NS platform is
added to the base test case to verify the compilation on a TF-M-enabled
platform.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The ioctl() call should be a part of the _XOPEN_STREAMS
Option in posix, so move it there.
Create a zephyr-native zvfs_ioctl() in the layer below.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add a driver for the National/TI LM95234 Quad Remote Diode and Local
Temperature Sensor with SMBus Interface and TruTherm Technology.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
This patch file updates the use of assertion macros
comparing strings.
Command line used:
```
./scripts/coccicheck --mode=patch \
--cocci=scripts/coccinelle/ztest_strcmp.cocci tests/
```
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
These tests are simple copies of the existing tests with the addition of
the CONFIG_MODULES=y option. This different Kconfig setting has no
practical effect on the code, and the tests are therefore redundant.
Remove them to halve the number of tests.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This API converts a HCI error code to a string.
This can be useful if application developers want to print them
in the applications.
Later we can also use them in the host to improve debuggability.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix incomplete test log capture when the external tool is used
and Twister Pytest Harness script ends without reading output
from the last test case running on the device.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
