The ICMP checksum was not placed to correct position in the
created test packet. This caused the checksum to be bad, and
because we now check the ICMP checksum, the packet was rejected
and the mld test failed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is organisation scope (ff08::) multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is site scope (ff05::) multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is zero scope (ff00::) multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we drop the received packet if the destination
address is interface scope multicast address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add two tests that will check if the source or destination address
is loopback address ::1 and we drop those packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Cache the used transport protocol in net_pkt. This way we can
avoid traversing IP header to get the last protocol in network
packet. This is mostly an issue in IPv6 which can have a long
list of extension headers after IPv6 header and before the
transport protocol header.
Fixes#10853
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some irrelevant errors were printed even if the tests passed.
Make sure that these obsolete errors at not printed so that
sanitychecker does not get confused about them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It might be that the test might access null pointer in some cases.
In practice this is not possible as the test is using pre-defined
data when running the test.
Fixes#10777
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed obsolete CONFIG_SYS_LOG_* and CONFIG_NET_DEBUG_* options
from various sample and test applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
*_ll_src/*_ll_dst/*_ll_swap/*_ll_if were not self explanatory, ll
meaning "link layer" it's ambiguous what the names meant.
Changing to:
*_lladdr_src/*_lladdr_dst/*_lladdr_swap/*_lladdr_if to fix this.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to have setup and teardown functions. Teardown will
even cause crash when tearing down last IPv4 test.
Fixes#9617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Run networking tests for native_posix, qemu_x86 and qemu_cortex_m3
platforms only as the tests are generic enough so no need to run
them in real physical device.
Fixes#9623#9614#9622#9621#9618
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add checks so that we do not overflow the network interface
array. Similar issues was fixed in commit b4dae00741 for
TX timestamp tests.
Fixes#9465
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor usage of net_sprint_ip*() where multiple
invocations are needed per single log call.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Fixes#9462
Coverity ID: 187670
Attempts to recalculate deltaBandwidth with no link lead to division by
zero.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Some locations like DHCPv4 client create a prefilled packet by appending
new fragments in a loop with one byte each via net_pkt_append_u8() which
is wasteful and noisy. This patch adds the new functions
net_pkt_append_memset() which creates fragments as needed in the desired
size and initialises it to the specified value.
This change also adds a unittest for the new function.
Prerequisite for #9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Commit ac92a01f5a changed the net_ipv6_hdr
definition. The ieee802154 fragment test wasn't updated to match this
change.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add system calls for the zsock implementations of socket,
close, bind, connect, listen, accept, sendto, recvfrom,
fcntl, poll, inet_pton, and getaddrinfo.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As ethernet_api is larger than net_if_api, and we are accessing
ethernet_api elements in ethernet L2 driver, then invalid memory
was accessed in L2 ethernet.c.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that net_if_ipv6_select_src_iface() returns correct network
interface for a given destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this commit all Qav parameters are tested and the fake driver
properly stores and recalculates info about all the Qav parameters to
make them available for read-back.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The new mappings require at least two traffic classes so there are fewer
tests than there are for the strict mapping.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
In coap module previous test cases are modified as well as
new test functions are added to increase the code coverage
Signed-off-by: Tarun Kumar Agarwal <tarun.kumar.agarwal@intel.com>
As the test is testing neighbor discovery which needs to know
link addresses, we must run the test using Ethernet L2.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There are too many individual requests for Qav related parameters. There
are more Qav parameters that need to be supported (and will be supported
soon - both on the GET and SET side). Handling it the way it was handled
so far would render the eth mgmt API dominated by Qav parameters. That
would make the file hard to read and understand.
Instead of that - use a single GET and SET requests for all Qav
parameters. This works by adding a separate enum with Qav request type
to the ethernet_qav_param struct.
Additionally this approach makes it much easier to document it all since
we now have just a single request and documentation comments in the
ethernet_qav_param struct.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commit changes how the fake driver stores info about priority
queues. This allows it to test the Qav status API.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some Ethernet devices can filter out incoming packets through a list of
valid MAC addresses, so let's add a way to expose this capability, using
it through the ethernet device API.
Fixes#7596
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds the get_config callback to the fake driver and makes
use of it to get the number of priority queues. That number is in turn
used in Qav tests.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
