Test advertising re-enable to cover reset of event counter,
duration and the number of events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Bluetooth host may request to send more than one CTE in
connectionless mode. That is relized by periodic advertising
chained PDUs.
To check correctness of implementation of such functionality
new unit tests were added.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
GATT/SR/GAD/BV-03-C will read attr value, but we parse NULL
from `attr->read` which point to `attr_read` function.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Since Zephyr supports EATT, which is reflected in ICS GATT_2_3
(Enhanced ATT bearer Attribute Protocol Supported (L2CAP fixed EATT PSM
supported) and GATT_2_3a (Enhanced ATT bearer supported over LE)
in GATT tests preamble 4.2.1.4 (Setup EATT Bearer over LE) is used
instead of 4.2.1.2 (Setup ATT Bearer over LE). Let's enable
EATT by default, allowing to run almost all GATT tests without
additional overlay.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Adds support for testing of persistence storage
for mesh Babblesim tests. Adds a sample test
for testing provisioning data.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Verify that AD Data when switching to Legacy Directed, and
restore it when switching back to Legacy Non-Directed
Advertising mode.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Some recent updates to the bluetooth shell test cause build failures
in CI for platforms that don't have a uart that supports interrupts
(ie ip_k66f or xmc45_relax_kit).
As these tests are build-only a single platform is sufficient to get
coverage and utilize platform_allow to limit to just one board target
intead of integration_platforms. As this will limit to the single
platform for both PR based CI and nightly CI (integration_platforms
only is utilized for PR based CI, so we'd need other filtering for
the nightly CI and there isn't any value in building these tests
on more than the single platform so platform_allow makes the most
sense).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some of the shell tests need a devicetree "fixed-partition" and
"storage_partition" for the settings partition support. Not all
boards support this, so filter the tests on the devicetree having
this.
Fixes#37115
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Babblesim test of Bluetooth Low Energy Central role
functionality by scanning for other devices and establishing
connection to upto 62 peripherals with a strong enough
signal.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If bsim tests are built without errors then warnings are hidden.
A couple of them has sneaked in recent PRs.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Add a couple of compile tests for the bt shell for
BT audio, including checking that the services can be
compiled individually without error.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a BabbleSim test for provisioning multiple devices in a row. This
scenario had a regression in #33782, which is fixed in #35405.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Tests check transmission, receiving beacons in situations
of IV update (with test mode on) and key refresh procedures.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Updated ISO test to demonstrate ACAD field in periodic
advertising PDUs. Here, test changing the periodic
advertising data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The purpose of this PR is to automatically test the
host in the native environment.
It is used to simulate /dev/tty*, can replace by /dev/pts/*.
Also, device log will be output to stdio by default.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Remove the bt_conn pointer from the AICS API, as the
instance pointer is enough to determine if it is a client
and perform client operations on the cached connection pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a function for the VCS client that gets the bluetooth
connection pointer if a given VCS client instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the VCS API to use the bt_vcs struct instead
of the bt_conn. This is create a more simple API
that uses a, remote or loca, instance pointer, rather
than a specified connection (for remote) or NULL (for
local) operations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add return of instance pointer in bt_vcs_discover so that a client
will get a bt_vcs pointer when doing discover, which will be
used going forward in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bt_vcs struct that represents a VCS instance,
either a local (server) or remote (client) instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the MICS API to use the bt_mics struct instead
of the bt_conn. This is create a more simple API
that uses a, remote or loca, instance pointer, rather
than a specified connection (for remote) or NULL (for
local) operations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add return of instance pointer in bt_mics_discover so that a client
will get a bt_mics pointer when doing discover, which will be
used going forward in the API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bt_mics struct that represents a MICS instance,
either a local (server) or remote (client) instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the struct from bt_vcs to bt_vcs_included, and
rename bt_vcs_get to bt_vcs_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_vcs as
an opaque pointer to a VCS service instance (local
or remote) to match the service instance pointers of
AICS and VOCS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the struct from bt_mics to bt_mics_included, and
rename bt_mics_get to bt_mics_included_get as that is more
descriptive of the value returned.
Furthermore, this will also allow us to use bt_mics as
an opaque pointer to a MICS service instance (local
or remote) to match the service instance pointers of
AICS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the bt_conn pointer from the VOCS API, as the
instance pointer is enough to determine if it is a client
and perform client operations on the cached connection pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit implements the microphone input control service
(MICS) and client, The implementation supports and uses the
Audio Input Control Service (AICS) secondary service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Updated advx test to verify previous sync data when no
extended header flags are set in the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated advx test to verify sync data when no extended
header flags are set in the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For the native posix build the sleep calls used in tasks will stall
the zephyr instance which sets an upper limit on the data processing
interval to once every 20-30 millisecond.
This change reduces the duration of the sleep calls and increases the
TICKS_PER_SECOND to allow for shorter sleeps. This is needed to
support the data rates needed for LE Audio streaming. The rate is
tuned to support up to bidirectional 5ms ISO-intervals.
This change also increases the ISO buffer count from 1 to 5 to
allow for some buffering in the controller, which is needed for
gapless playback and/or use of burst number larger than 1.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
