Print the neighbor pointer address and remaining time when
viewing the neighbor cache in "net nbr" command.
Change-Id: I13840ccc16c31c99a803ec1b7afe69879bd639f2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the proper API to get the remaining time in prefix timer
and return the value in seconds as expected.
Change-Id: I055ce0ba6092c23ad60d6775ce75a0a67ad91d26
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to verify that the neighbor is reachable, send
neighbor solicitation message to neighbor which should then
send neighbor advertisement to us so that we can then mark
it reachable.
Change-Id: I2c45ee4a6982c698ef6c8fa1acccb995aadf8ee6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to be able to debug IPv6 neighbor state changes,
pretty print the state names when setting the new state.
Change-Id: I64e0b4173eaa63c9715c17420a008602759aa4fa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
To be used by net-shell and other files for debugging neighbor
state.
Change-Id: Ie9b09a54a05dcb066906a3697dfe38aeffc886e6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "null terminator" for the chunked transfer encoding must be
added only if the payload is present.
Change-Id: Id325a660f060b3a3468bcca16a079def11b8c3ef
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
No need to print error if we have already joined a pre-defined
multicast group.
Change-Id: I1237d5fbf0b63267ccb00432522513358c48d31d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Wrong type modifier %zu in debug print, should be %d.
Change-Id: I82feca91d9e083a03263477569c552acc7c9767f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Patch 235118245864491a592245f57e5244bf61711943 did not set the ll
addresses in the right buffer which causes 6lo to unref buffers
causing a double unref latter.
Jira: ZEP-1890
Change-Id: Id7591ef3c20c7ab62dcb04576406d70602baa129
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
IPv6 fills in lladdr_dst properly according to nexthop. Thus it's
useless to lookup again for nbr when creating data frame etc... Let's
use this directly. It both optimizes the code path as well as implements
proper nexthop frame sending.
Jira: ZEP-1863
Change-Id: Ic17a1b14a0db0692d31419ea2f45a5f288a09fb5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch adds the HTTP/1.1 API for Zephyr. This API consists of client
and server context structures enabled via Kconfig variables.
HTTP parser support is enabled via the CONFIG_HTTP_PARSER configuration
variable.
Currently, this API only includes support for writing HTTP requests
(client mode) and HTTP responses (server mode). TLS support is not
considered in this iteration.
Supported HTTP methods:
GET, HEAD, OPTIONS and POST.
Supported HTTP responses:
400, 403 404. The http_response routine may be used to write
any HTTP status code, for example 200 OK.
Jira: ZEP-1701
Change-Id: Ic9ccd4d4578d6d0f3a439976ea332b031644ca7d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Now that k_poll landed in the kernel, it's worth using it to save
memory and reduce the number of threads at runtime.
Such switch has been first done in bluetooth (see hci_core.c and conn.c
in subsys/bluetooth/host). Since network interfaces kind of follows the
same design for sending data, it was then easy to copy the same change as
in bluetooth.
Change-Id: I7f9734b88ac818284bbabaedc946b4765b905ebb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Due to recent TCP fixes for 6lo, we are making a copy of buffers
sent to net_tcp_send_buf() so that TCP retransmit can send the original
(unmodified) buffer. This original buffer is freed via the TCP
sent_list when the related ACK packet is received.
However, there are users of the net_tcp_send_buf() function which
will never get a corresponding ACK (and do not add the buffer to the
TCP sent_list). An example is send_ack() in net_context.c. In this
case, we leak the original buffer.
To fix this leak in the 6lo specific block of net_tcp_send_buf(),
let's check to see if the original buffer was added to the TCP sent_list
and if not, then avoid the buffer copy process entirely.
Change-Id: If99e0e5bf266d33dd3466dc5d74443eaa39d10a8
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The static keyword is missing in the dns_find_null function definition.
Change-Id: I19c89ca61b6ff550bf7ccb2ca9065a957532ede1
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Don't break the line after the static keyword.
Change-Id: I51343124ae3b3a2f9b4916c5279ba09b8c08fd9a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Instead of magic constant (0) use the K_NO_WAIT when spawning
a thread.
Change-Id: Ib3a181fdfa246843d9c708592ccc754e54bc6005
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the networking cannot work without RX or TX threads, mark
them as essential.
Change-Id: Icb52c77fcdcef35d77c36e5ec855fed438a38407
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we cannot join pre-defined allnodes or solicit node multicast
groups, then print error. Typically this will happen if the number
of multicast IPv6 address records is too small in net_if struct.
Change-Id: I12211cff90ef4edc856f1432cab0c37aae9a1bd5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is only needed when doing unit tests.
Change-Id: Ifd4e5e8ea98e3ab2344ed0c19d92f2be7d8008f8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect number of received, sent or dropped multicast listener
reports and queries.
Change-Id: Ia5c08203155475763f96df23f44eceffa7569873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive MLDv2 (Multicast Listener Discover) query,
we send out information about the multicast groups that
we have joined.
Change-Id: If4ea9fa685319b2ad900e1949a5cbe12e7696b43
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As dictated by RFC 3810 ch 5, we need to add Hop-by-Hop option
with Router Alert sub-option to the sent multicast listener
message.
Change-Id: I8e3ed58fff4736e9708276a3185f94e7f2b453a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are taking network interface down, then flush the TX for any
pending bufs that would be needed to be sent.
Change-Id: I229ecce8e07ec5847d4c6c6a1994de04bd9171e2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the multicast address already exists, then do not give
error but try to join it.
Change-Id: I32ffa6b3bf0798011d684a1a21e87e389f1f0380
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When network interface is taken down, leave only those
IPv6 multicast groups that were joined.
Change-Id: I414556c093ba67be7c13e6c86e0451465c2203f3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Send management event if we joined or leaved IPv6 multicast
group.
Change-Id: Ieeb407ef88fb3bf4cd92d4fb4b69f03b260474e7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we setup the network interface, add predefined IPv6 multicast
groups into the network interface. When interface is taken down,
then leave all the multicast groups that joined.
See RFC 4291 ch 2.8 for details.
Change-Id: If17d3e8c75157a02aa93c92e2fb499619c1484cf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This and subsequent commits adds API to join or leave
an IPv6 multicast group.
Jira: ZEP-1673
Change-Id: I26dcfe16a4527dbf7886a30827a5d4ebfdeaac01
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The tcphdr->offset was not set when tcp options were added.
Change-Id: I19fe97983ce81948a9a84893183e5c9000f12767
Signed-off-by: june li <junelizh@foxmail.com>
There are no users of net_tcp_set_state() left outside of
subsys/net/ip/tcp.c.
And the naming of this function is confusing -- it could easily
be mistaken for net_tcp_change_state() which contains additional
logic for certain tcp states.
Let's remove it entirely and fix the remaining uses to set
tcp->state directly.
Change-Id: I92855ad180e8682780fcff11e50af06adcbc177c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In net_tcp_release() when a TCP connection is being closed, we
should call net_tcp_change_state instead of net_tcp_set_state.
net_tcp_change_state() will call into net_tcp_set_state() but
also contains logic specific to NET_TCP_CLOSED which unregisters
the context's conn_handler and sends an accept callback (if
present) with -ENETRESET error for user code to handle.
This fixes an EISCONN error returned by net_context_bind() when
a TCP-based net_context was reused. Due to the conn_handler
not being cleaned up in the TCP code.
Change-Id: I8439a028a1c7ae5fd2a50d11caa9947a0ac6c7d4
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The parsing of IPv6 extension headers was skipping bytes
in certain cases.
Change-Id: I80612144aed55aa2dcf9eaab1f4408e10ef9ca31
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Compress bit calculation was wrong. It should be moved
to 4 bits left to cache it properly.
Change-Id: Ib011874881a69032795c2ecfd9a615b6cf559c69
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Max 6lowpan contexts are 16 as per RFC 6775 4.2 6LoWPAN Context Option.
Range is 0 - F. So context id '0' is valid.
Change-Id: I8468a805e0145b64921139a587cdaeeb9d6871b8
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If hoplimit bit is unset then values are inlined as
per RFC 6282 3.1.1 HLIM: Hop Limit.
Change-Id: I5821fdf1a4a65b252362277cc604ae913203f80e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Hop limit compression should be after next header compression as
per RFC 6282 3.1.1.
Change-Id: I0eaf3428bf835fe73831a7fe6fb708b73c8f5d12
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_nbuf_ll_src(buf)->addr and net_nbuf_ll_dst(buf)->addr should be
pointing to ctxt area not actual net_nbuf_ll region since the payload
over Bluetooth does not carry any ll addresses.
Change-Id: I87828d74abf2402fdf2a5e34aa8db93aa7c50d08
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the packet contains IPv6 header + Extra header + ICMPv6 headers,
last header does not contain 'next header and length' fields. So
while parsing header we should first check next header and continue
parsing. Otherwise we parse 2 bytes extra and set invalid ext hdr len
and handover to other layers. So everything goes wrong after that.
Also simplified next header parsing to minimal.
Change-Id: I5d8235c5a57c8b77adf6a07eb8eb74350a3e4dc6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the buffer contains IPv6 header, set header length only once.
Need not to set it in different scenarios.
Change-Id: I54ab9a4259851c9230db240f6091e3190d25b6cb
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If RPL is not enabled do not handle RPL options in IPv6 extra header.
Issues will arise if we skip reading those bytes and continue further.
E.g. Upper layer protocol like ICMPv6 echo request does not prepare
proper echo reply if we skip like this. It doesn't know what options
need to be updated in reply header.
Change-Id: I250672a54d4c7f60727313f6e7f8fe902685d0c5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Verdict not assgined to its proper value and return NULL in case
of read error. Also simplified error handling.
Change-Id: Idf4c5e242066dfd03e1519271dc1ba38ec43e6ce
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Verdict NET_DROP returned even though it handled properly.
Change-Id: I61e04b12f971b39585e983aa9a1007c63acd8b4e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
