Fix feature exchange event generation to be correctly
deferred to wait for Rx node availability for cases when
the procedure has already been performed on air.
Without this fix, remote feature request from host may not
get back a HCI event back.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Port missing implementation of the slave latency break
when there is data to be sent to peer master. Without this
initial data send from slave is delay by upto the slave
latency number of connection events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a port of the commit 4135fb55f1 ("Bluetooth:
controller: Fix rejected enc procedure not terminated") and
commit 4d59ef306b ("Bluetooth: controller: Check if enc
procedure is in progress").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Disallows all unauthenticated pairing attempts made by the
peer where an unauthenticated bond already exists.
This would enable cases where an attacker could copy the peer device
address to connect and start an unauthenticated pairing procedure
to replace the existing bond. Now in order to create a new bond the old
bond has to be explicitly deleted with bt_unpair.
Added option to disable this rule in order to maintain backwards
compatibility in case this behavior is accepted.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Several macros were documented as deprecated but lacked the
infrastructure to produce deprecation warnings. Add the deprecation
marker, and fix the in-tree references to the deprecated spellings.
Note that one non-deprecated macro should have been deprecated, and
is, referring to a newly added line control bit.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Adds the model extension concept to the access layer, as described in
the Mesh Profile Specification, Section 2.3.6. Extensions are
implemented as a tree, using two pointers in each model:
The extends pointer points to the first extended model, and the next
pointer points to the next sibling or (if the NEXT_IS_PARENT flag is
set) the parent model in the tree, forming a cyclical "Left-child
right-sibling" (LCRS) tree. The tree root can be obtained by calling
bt_mesh_model_root_get(), and the extended models can be walked by
calling bt_mesh_model_tree_walk().
According to the Mesh Profile Specification Section 4.2.3, all models in
the same extension tree share one subscription list per element. This is
implemented by walking the model's extension tree, and pooling the
subscription lists of all models in the same element into one. If the
config server adds a subscription to a model, it may be stored in any of
the model tree's models' subscription lists. No two models in the same
extension tree and element will have duplicate groups listed. This
allows us to increase extended models' capacity for subscriptions
significantly.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix missing log_strdup when loading bt/name setting. It should be done
on every string which is not in read only memory.
Signed-off-by: François Delawarde <fnde@oticon.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Currently the error codes returne from this function is ignored.
Add error reporting to allow users to handle what is reported.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Reduces the severity of warnings that happen from normal behavior, or
can't be prevented by the user:
- "No ID address" in hci_core.c: Reduced to an informational warning, as
this will always output with the expected usage. This isn't useful
information for 99.9% of users, and pollutes the output of all samples
using the module.
- "Composition page %u not available" in cfg_srv.c: According to the
Mesh Profile Specification section 4.4.2.2.2, the client is expected
to send page=0xff. Reduced to a debug message.
- "Connectable advertising deferred" in proxy.c: Gets logged every 10
seconds when in a Mesh Proxy connection. This is not useful
information unless the user is debugging the proxy module. Reduced to
a debug message.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
A single connections may take up to 4 buffers at the same time. Make
number of connections that support this worst-case number
configurable.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Relates to commit 26317491e04b ("Bluetooth: controller: Add
data length procedure queueing").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Relates to commit 560d6ddb964c ("Bluetooth: controller: Fix
Re-encryption procedure").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix dropped ENC_REQ PDU when retransmitting, if slave was
not listening or nack-ed it.
Relates to commit 31256568a283 ("Bluetooth: controller: Fix
ENC_REQ PDU retransmission").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Relates to commit 4b4b650174bf ("Bluetooth: controller: Fix
control tx queue handling").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256 and commit 0dcfa3853782 ("Bluetooth:
controller: Fix cmd disallowed and collision disconnects").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Relates to commit 120eba45f81b ("Bluetooth: controller: Fix
start encryption in progress check").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Relates to commit 671ccc4b0ee6 ("Bluetooth: controller: Fix
data PDU leak during ctrl PDU defer").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in Data Length Update procedure that caused the
connection to drop due to the implementation sending bigger
PDU before the peer has acknowledged the receipt of Length
Response PDU.
Relates to commit ffbbec7a89ca ("Bluetooth: controller: Fix
DLE during data transmission").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
1) Add cryptographically secure random functions to provide
FIPS 140-2 compliant random functions.
2) Add name to random function choice selectors to ease
selection in SOC .defconfig files
3) Add bulk fill random functions.
Signed-off-by: David Leach <david.leach@nxp.com>
Disable "at exit" memory leak check by LSAN if building for a 64-bit
target with GCC. This is need to fix a potential deadlock in GCCs
libasan implementation.
Fixes#20122
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
We use the nRFx API nrf_get_irq_number(.) to retrieve the IRQ
line of the CCM peripheral, instead of the hard coded enum
value from MDK. We do this for portability, since these
enums may be different for different nRF SoC series.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The C++ STD library is not compatible with the minimal C library. To
ensure that users do not accidentally enable LIB_CPLUSPLUS while also
enabling a minimal libc library we add a dependency in Kconfig.
Also, use depends instead of select between EXCEPTIONS, RTTI, and
LIB_CPLUSPLUS as use of select is discouraged in this situation.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix conditional compilation error in building the central
only samples as all peripheral structure member accesses in
the controller where not correctly compiled out.
Regression introduced in commit 6d8b12468e ("Bluetooth:
controller: split: Refactor LLL conn structure").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We make a minor simplification in the way we define
RADIO_PDU_LEN_MAX in Nordic nRF LE radio driver; as
nRF51 SoC series is the only series where the LL PDU
max length representation is limited to a 5-bit field,
we simplify the conditional preprocessor expression,
to avoid having to list all nRF5x SoCs with PDU LEN
MAX is represented by an 8-bit integer field.
In addition, we modify the preprocessor conditional,
that compiles in the CCM support for 8-bit length field,
PDUs to be an #ifndef CONFIG_SOC_SERIES_NRF51X, instead
of #ifdef CONFIG_SOC_COMPATIBLE_NRF52X; this will
simplify the expression when adding nRF53X series
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
GATT parameters need to remain valid while the procedure is active.
Disallow GATT commands while the procedure is active to avoid asserting.
Fixes: #20232
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add the missing initialization of master role terminate_ack
flag. This caused slave initiated remote termination as
procedure timeout.
Fixes#20135.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the LLL connection context to move out the member
fields not accessed in LLL execution context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
C++ does not allow chaining of data members when identifying the
designator. Since the generic structure has only one member remove
the designator from its internal initializer.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The length passed to settings_runtime_set was not taken into account
in the read callback. This commit fixes it.
Signed-off-by: François Delawarde <fnde@oticon.com>
Move calculation of max_tx_octets from Nordic lll_conn.c to ULL, to
allow usage by other vendors and prevent duplicate code.
Signed-off-by: Morten Priess <mtpr@oticon.com>
With sub-microsecond resolution in ticker, it is not necessary to add a
precision margin to the conn_offset. A macro is created to allow setting
the margin to something other than the hard coded 2 * EVENT_JITTER_US.
Signed-off-by: Morten Priess <mtpr@oticon.com>
TX pdu buffers may need to be augmented for fragmentation or other
purpose, depending on vendor LLL implementation. Introduced define to
add extra bytes to TX buffer size, defaulting to 0 if unused.
Signed-off-by: Morten Priess <mtpr@oticon.com>
ssize_t type variable was compared to size_t type variable which will
cause error for comparison while ssize_t value will be nagative.
This patch fixes that.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added a Kconfig option to disable Zephyrs cpp implementation for
operator new, delete, pure virtual functions and vtables.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Make it possible to provision devices over advertising bearer (PB-ADV).
Many messages in the provisioning protocol are the same for provisioner
and device so much of the code could be reused by only changing when
they are expected to arrive.
This introduces to concept of local and remote device keys. The models
for cfg_cli and cfg_srv have been updated to reflect this concept. Both
the send and receive path in the transport layer have been updated to
support encrypting/decrypting with local and remote device keys.
When a node has been provisioned it is stored in bt_mesh_net.nodes. If
CONFIG_BT_SETTINGS is enabled, they are also saved to settings. If the
callback node_added in bt_mesh_prov has been set, it will be called for
every node that gets provisioned. This includes when they are retrieved
from settings.
The configuration CONFIG_BT_MESH_NODE_COUNT controls how many nodes that
can be provisioned.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
Use of the test suite in C++ causes warnings because use of defined
cast operators have the wrong target type. For example, many standard
container APIs use operator bool() to test for empty containers. Code
like zassert_true(v, "") fails to build when the test parameter is an
int. Correct the argument type.
This also causes any use of an assignment expression as a conditional
in zassert to be diagnosed as a potential error.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
