This adds the dummy shell buffer size to the shell_mgmt
configuration to allow ease of changing it.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This fixes the compiler warning "comparison of integer expressions of
different signedness: 'int' and 'unsigned int' [-Werror=sign-compare]"
Signed-off-by: Benjamin Gwin <bgwin@google.com>
DFU on Windows with WinUSB driver failed with "Lost device after RESET?"
error because WinUSB does not support host initiated resets. USB Device
Firmware Upgrade Specification Revision 1.1 attribute bitWillDetach can
be used to overcome WinUSB reset limitation. When bitWillDetach is set,
it is the device responsibility to detach and reattach itself to the bus
after receiving DFU_DETACH request.
Add and enable by default USB_DFU_WILL_DETACH configuration option,
because it is the only way to support WinUSB driver. WinUSB driver is
preferable because it can be automatically installed on Windows 8 and
later if USB device implements WCID descriptors.
Fixes: #49821
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Set the correct number of Ctrl Tx buffers used for the new
implementation, so that the ACK-fifo gets the correct size
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Conditionally compile the legacy control procedure defined
control Tx buffers that is not required in the new control
procedure implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Zephyr doesn't seem to allow on adding route to the device from
which it received Router Advertisement without SLLAO field set
(in particular device that doesn't include Link Layer address).
Changes done:
* Added creating new NBR without Link Layer address set on RA
reception (LL is added only if SLLAO option is set, otherwise
NBR doesn't have LL address, but exists in the table and has
valid IPv6 link local address).
* Removed two asserts preventing from adding route to the NBR
that doesn't have Link Layer address set.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Extend SenML-JSON content format for handle cached data
timestamp API for basetime and timestamp label's.
Added support for write historical data for static resource
size's: Float (v) and Boolean (vb).
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Added support for historical data encode by adding base time (bt)
and time (t) label. New labels are needed for Encoder so Decoder
is not regenerated.
Added support for SenML-CBOR to write time series data.
Use "bt" base time and "t" timestamp labels for data cache.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
New API for enable Historical data storage for LwM2M resource.
Data cache is only supported at resource which resource size is
static and well known.
Extend output writer for write cached data timestamp.
Enable cache support for Resource set and Read operation.
Added possibility for for drop latest or oldest data from cache.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
The codec->path_id supplied to the capabilities
were not being used for the endpoint codec.
Important note: This only works if there is a single
capability per codec ID per direction. This limitation
is also an existing limitation in the current
implementation of capabilities.c.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixed an issue with syncing to multiple BIS as the broadcast
sink in the shell. Also changed a check in the broadcast
sink implementation from an assert to a `if` to provide
a better way of handling bad input.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds support for handling fragmented advertising data over HCI when
CONFIG_BT_CTLR_ADV_AUX_PDU_LINK is not enabled
- Added support for appending advertising data to ull_adv_aux_hdr_set_clear
and ull_adv_aux_pdu_set_clear via ULL_ADV_PDU_HDR_FIELD_AD_DATA_APPEND
- Updated ll_adv_aux_ad_data_set and ll_adv_aux_sr_data_set to
handle fragmentation ops without CONFIG_BT_CTLR_ADV_AUX_PDU_LINK
Signed-off-by: Troels Nilsson <trnn@demant.com>
Gives the application a two way mapping between array index
and a per_adv_sync object instead of current only per_adv_sync
obj -> index using bt_le_per_adv_sync_get_index.
Signed-off-by: Jakob Krantz <jakob.krantz@u-blox.com>
Update fff.h to the pending PR upstream which allows for using a custom
function signature. This enables the use of C++ std::function as the
mock.
Signed-off-by: Yuval Peress <peress@google.com>
When an application is waiting on a completion it may be expecting,
rightfully so, that a new submissions slot is available.
Frees the submission queue event prior to enqueuing
the completion queue event in the simple executor.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Show function names for all BT_xx logging levels when BT_DEBUG_LOG is
enabled. This makes it easier to find the problematic lines.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
- Downgrade the warning emitted when we run out of channels.
- Only log a warning when failing to establish channels and the error is
not -ENOMEM.
- Add a debug log message in that case to hint what might've happened.
This should make it less confusing to the average user not aware of the
stack internals.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This is a scary-looking warning for users, and should only really matter to
stack developers. It will eventually show up in the wild for embedded
devices that don't get updated to the latest and greatest.
Reword it to make it clear we are rejecting it, and it doesn't impact the
stack in any way.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This makes it more user-friendly, in case no failed cb has been
registered so this error is printed out of context.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Reword the scary-looking `bt_hci_core; Malformed data` warning to show
where it is originating from.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This fixes GTBS index used in API. The index that is exposed to the
application is 255 in case of GTBS.
The code has been reworked to remove redundant booleans and index that
was kept inside instance.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
By design, adv main set can use to send relay mesh messages
but here adv main set is invoked.
Add in the ended, so, adv main set only can be used when all
relay adv sets busy.
and this way does not cause too much delay for adv main set,
due to local message will process firstly.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Adds feature that deletes the shell CDB node after perfoming a config
client reset of another node.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Remove redundant assertion check, and minor indentation fix
to correct the alignment of function call.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Alters several provisioning related features to allow commands to be
functional with application defined Provisioning properties &
capabilities.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Update the existing ASE EP state checks to be more correct
and aligned with the ASCS specification.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable ticker ticks slow window extensions implementation
when broadcaster role is enabled. This feature moves the
primary channel advertising event within the specified
window when overlapping with other roles.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable 4 bit bus width for high speed cards, so that host and card
combinations that cannot use UHS mode will still benefit from the
speed increase of using 4 data lines.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Implemented:
-- Combining segments from multiple SDUs in a single PDU for TX
-- Release of PDU based on remaining capacity below threshold
-- Release of any PDUs in production on receiving a timeout for the
upcoming event
-- Release of PDUs in production if source if destroyed
-- Synchronization flag to exclude multiple contexts in ISO-AL
-- New Kconfig BT_CTLR_ISO_TX_SEG_PLAYLOAD_MIN to allow definition of
minimum TX segment size
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Implements:
-- SDU fragments can be buffered in the ISO-AL so that the correct size
of the SDU can be computed such that it can be released for inclusion
in the first fragment's header
-- Changed SDU emit interface to allow the same structure to be used to
buffer as well as release fragments
-- New configuration BT_CTLR_ISO_RX_SDU_BUFFERS to specify the number of
SDU buffers for each sink
(Buffering disabled when BT_CTLR_ISO_RX_SDU_BUFFERS=0)
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Implemented:
-- Storing information required to service HCI_LE_Read_ISO_TX_Sync
request
-- Implemented interface to retrieve information
-- Cleared ISO-AL source and sink state on deallocation
-- Renamed cig_ref_point to grp_ref_point as it serves a common purpose
in both CIS and BIS
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Improvement for IAL/CIS/FRA/PER/BI-01-C & IAL/CIS/FRA/PER/BI-02-C
-- Test appears to fail as the transmitted PDU is packed with less data
than is indicated in the segment headers.
-- Guards were included to verify that sufficient data exists in the PDU
before extracting the segment.
General
-- Updated timestamps in error SDUs to better approximate the expected
timestamps if time information is missing.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Accept now from bootstrap trigger from any state expect ongoing
bootstrap process.
Free also possible on going RD client message. There was a chance
that update message response change state and bootstrap proces
not started.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Updated message handler that it free possible old allocated
message. Added message free also to RD stop and idle state.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Renamed LWM2M_RD_CLIENT_EVENT_REG_UPDATE_FAILURE to
LWM2M_RD_CLIENT_EVENT_REG_TIMEOUT.
Changed reported event type for registration timeout to
LWM2M_RD_CLIENT_EVENT_REG_TIMEOUT from
LWM2M_RD_CLIENT_EVENT_REGISTRATION_FAILURE.
LWM2M_RD_CLIENT_EVENT_REGISTRATION_FAILURE should be only
reported case when server reject by response registration.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
In case a connection update complete event reports an error, the
parameters reported should be the ones active on the connection and not
the ones requested
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Some variables shadow global, which is difficult to handle when
porting to other platforms with shadow warnings turned on.
https://github.com/zephyrproject-rtos/zephyr/pull/50581
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This removes the callbacks from capabilities. The callbacks are used for
unicast server role only, while the capabilities are used for the
broadcast sink role as well. Thus the callbacks can be removed as there
is another bt_audio_unicast_server_cb API that is specific for unicast
server role.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fixes the discovery function that handles GTBS only discovery. The
discovery stops when there is no space left for another instance. The
function has been split to improve the code readability and avoid
unnecessary UUID comparison.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
C++20 standard added [[nodiscard]] attribute to operator new
definitions. In case value returned by operator new is ignored,
compiler emits a warning.
The commit adds the attribute to operator new definitions.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
C++17 delivered another specialization of a new operator,
that allows to allocate a memory with requested alignment.
The commit adds these specialziations to C++ subsystem.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
