Include the full version in the output of the "kernel version" shell
subcommand. Previously, EXTRAVERSION was not included, causing
e.g. "3.6.0-rc1" to be printed as "3.6.0".
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
* The include for the host libC should be guarded with
using the host libC instead of the POSIX arch, as this
supports other C libraries.
* This code uses getopt, which is an extension to the
C library. Let's explicity select one of the extensions
which includes it instead of relaying on somebody having
set it for this file somewhere else.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The previous behavior of the CONFIG_SHELL_AUTOSTART option, where setting
it to 'n' disabled shell interaction at startup but kept the logger
active as a shell backend, was inconsistent.
Now, when CONFIG_SHELL_AUTOSTART is set to 'n', both the shell and the
logger are inactive at startup. Calling the shell_start function will
activate them and print any pending logs. This change ensures a more
consistent and logical behavior regarding shell and logger activity at
startup.
Additionally, now when the shell_stop function is called, both the shell
and the logger are halted. This enhancement ensures that stopping
the shell also effectively stops the associated logger.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@verkada.com>
If there's not enough networking buffers at certain moment,
they might become available later. So instead of closing connection
(and failing assertation) sleep and retry. This avoid the following
assertion failure when there's much of data to send:
net_pkt: Data buffer (1500) allocation failed.
net_tcp: conn: 0x20076024 packet allocation failed, len=1460
shell_telnet: Failed to send -105, shutting down
ASSERTION FAIL [err == 0] @ .../subsys/shell/shell_ops.c:416
os: r0/a1: 0x00000004 r1/a2: 0x000001a0 r2/a3: 0x00000004
os: r3/a4: 0x20044380 r12/ip: 0x00001958 r14/lr: 0x080c9027
os: xpsr: 0x41000000
os: Faulting instruction address (r15/pc): 0x0811ed26
os: >>> ZEPHYR FATAL ERROR 4: Kernel panic on CPU 0
os: Current thread: 0x20045100 (shell_telnet)
os: Halting system
Signed-off-by: Miika Karanki <miika.karanki@vaisala.com>
__bswap_ in zephyr/sys/byteorder.h conflicts with __bswap_ in host's
byteswap.h. byteswap.h from host compiler used in posix_native_64 boards
causes a compilation issue.
This commit renames __bswap_ to BSWAP_ to prevent collision.
Before this commit a compilation error can be created by adding #include
<byteswap.h> to samples/net/sockets/echo/src/socket_echo.c
This does not change external API to byteorder.h, but does change
internal implementation which some other source files depend on.
Replaced manual byteswap operations in devmem_service.c with APIs from
byteorder.h which automatically converts to CPU endianess when necessary.
Fixes#44324
Signed-off-by: Jonathan Hamberg <jonathanhamberg@gmail.com>
Always use k_thread_foreach_unlocked with callbacks which print
something out to the shell, as they might call arch_irq_unlock.
Fixes#66660.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
There are several subsystems and boards which require a relatively large
system heap (used by k_malloc()) to function properly. This became even
more notable with the recent introduction of the ACPICA library, which
causes ACPI-using boards to require a system heap of up to several
megabytes in size.
Until now, subsystems and boards have tried to solve this by having
Kconfig overlays which modify the default value of HEAP_MEM_POOL_SIZE.
This works ok, except when applications start explicitly setting values
in their prj.conf files:
$ git grep CONFIG_HEAP_MEM_POOL_SIZE= tests samples|wc -l
157
The vast majority of values set by current sample or test applications
is much too small for subsystems like ACPI, which results in the
application not being able to run on such boards.
To solve this situation, we introduce support for subsystems to specify
their own custom system heap size requirement. Subsystems do
this by defining Kconfig options with the prefix HEAP_MEM_POOL_ADD_SIZE_.
The final value of the system heap is the sum of the custom
minimum requirements, or the value existing HEAP_MEM_POOL_SIZE option,
whichever is greater.
We also introduce a new HEAP_MEM_POOL_IGNORE_MIN Kconfig option which
applications can use to force a lower value than what subsystems have
specficied, however this behavior is disabled by default.
Whenever the minimum is greater than the requested value a CMake warning
will be issued in the build output.
This patch ends up modifying several places outside of kernel code,
since the presence of the system heap is no longer detected using a
non-zero CONFIG_HEAP_MEM_POOL_SIZE value, rather it's now detected using
a new K_HEAP_MEM_POOL_SIZE value that's evaluated at build.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Addresses a potential issue when the string contains only '\0',
which results in z_shell_strlen(str) returning len as 0.
Since the for-loop expects len >= 1, the function now immediately
returns when len == 0.
As the null check for 'str' is already handled inside
z_shell_strlen(), an additional check for 'str' is not needed.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
EAGAIN error is returned if the tcp window size is full. Retry
sending the packet instead of closing the connection if this
error occurs.
Also the full payload may not be sent in a single call to
net_context_send(). Keep track of the number of bytes remaining
and try to send the full payload.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Reinstate the `SHELL_UART_DEFINE` macro and moved the struct
declarations to header file, making it possible to create
another UART shell backend instance by doing
`SHELL_UART_DEFINE()` + `SHELL_DEFINE()` + `shell_init()`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Fixing typo from the original implementation in
44705b698c725166834f19d6fd5db2804f9a0d60, which resulted in
the name of current shell instance getting print over and over
again.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`smp_shell_input_timeout_handler`. Create a public function in
the `shell_uart.c` for it to get the pointer to the
`smp_shell_data` and fix the compilation error.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
When UART asynchronous API support was added to shell it was set up
to be the default one and was turning on asynchronous API if it was
supported. However, it may lead to complation failures if device
requires additional setup for asynchronous UART (e.g DMA in device
tree). Becuase of that, it is reverted back to use interrupt driven
API and use asynchronous API if it is already enabled in the
application.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Fixing compilation failure due to treating void pointer as uint8_t
array. Added missing casting.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework UART backend to clearly use single instance approach as
before it was a bit messy with some parts of implementation indicating
multi-instance approach and some single instance. Backend has been
around for years and multi-instance requirement never came.
Added support for UART asynchronous API which is more efficient
in terms of power consumption and performance. Asynchronous API
support is using uart_async_rx helper module for handling data
received asynchronously.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
It declares a variable inside a switch statement without brackets to
properly delimit the scope, making clang barf. This patch adds them.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Adding support for echo option if telnet commands are supported. This is
useful when the telnet client is in character mode. It allows to use the
arrow keys, ctrl-c and more. Something to keep in mind is that when
character mode is turned on by the client, network traffic is
considerably increased as each typed character is sent over the wire.
Note: echo mode is only supported if SHELL_TELNET_SUPPORT_COMMAND is
enabled.
Signed-off-by: David Corbeil <david.corbeil@dynon.com>
The shell name defined with `SHELL_DEFINE` is implicitly
guaranteed to be unique while it is possible that more than one
shell backends can have the same prompt.
Print the name of the shell backend alongside with its prompt
to differentiate between the backends.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Added some new APIs to get the backend instances more easily,
so that dev does not need to rely on `shell_backend_*_get_ptr`,
which looks more like a hack to access a local variable.
These APIs are basically copied from the log backend
implementation.
Added testcase for the APIs.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Rename the shell backend `thread_name` variable to just `name`,
to be used for other things not specific to thread later.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Compiler can't tell that k_thread_abort() won't return and issues a
warning unless we tell it that control never gets this far.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
HAS_DTS has become a redundant option. All Zephyr architectures now
select this option, meaning devicetree has become a de-facto
requirement. In fact, if any board does not provide a devicetree
source, the build system uses an empty stub, meaning the devicetree
machinery always runs.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Added a condition to check if the size of the copied
memory is a positive number.
Fixes#58700Fixes#58703
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@verkada.com>
The connectivity monitoring subfeature of conn_mgr is currently also
named conn_mgr, which is confusing.
This commit renames it to conn_mgr_monitor, or conn_mgr_mon for short,
for clarity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Set correct SHELL_BACKEND_SERIAL_INIT_PRIORITY if ACPI is enabled.
Otherwise when enabling SHELL using menuconfig, etc serial backend is
not working.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The default stack size is too small on 64bit.
Some standard shell commands cause stack overflow
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
The RTT backend of the shell does not support several of the more
advanced terminal features. This commit proposes to inactivate these
features by default when RTT is selected as shell backend.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Device dependencies are not always required, so make them optional via
CONFIG_DEVICE_DEPS. When enabled, the gen_device_deps script will run so
that dependencies are collected and part of the final image. Related
APIs will be also made available. Since device dependencies are used in
just a few places (power domains), disable the feature by default. When
not enabled, a second linking pass will not be required.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
call k_thread_foreach_unlocked to avoid assertions caused
by calling shell_print while holding a global lock
Signed-off-by: Maxim Adelman <imax@meta.com>
shell_strtoull used a unsigned long instead of a unsigned
long long to store the result in stroull, so the return
value may have been truncated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Without this fix, for every call to shell_vfprintf,
a prompt string and vt100 codes are printed too,
resulting in mangled log output.
Signed-off-by: Lars Knudsen <lakd@demant.com>
Add a shell_strtoull function that works similar to
shell_strtoul except that it calls strtoull instead
of strtoul.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
While it may be useful in some contexts, this information can be
obtained at compile time. Removing this command allows to migrate the
device infrastructure code to standard iterable sections, done later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since conn_mgr is a subsystem rather than a library, relocate it
directly into subsys/net rather than subsys/net/lib/
Rename header files to better match their function.
Remove net_ prefix from conn_mgr types, API, and files, since it is
unnecessary.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
This change to the shell API enables the user to retrieve the
return code of the most recently run shell command. This is
useful both for users wanting specific information beyond the print
statements in a command, but especially for automated users
that prefer a simple return code to parsing human readable text.
This was tested using all default shell commands, as well as
eeprom, flash, and i2c, where specific errors could be forced.
In all cases, the correct return value was returned by the new
retval command.
Signed-off-by: Hunter Searle <hsearle@xes-inc.com>
Convert handling of shell_root_cmds, shell_subcmds, and
shell_dynamic_subcmds to use iterable section macros.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
