Uses of k_work_pending are to be replaced by k_work_is_pending which
conforms to current proposed naming guidelines.
Switch to the new function.
Also initialize the private work structure at build time, rather than
on each iteration (it is not permitted to invoke work API on an
uninitialized work item).
The implementation here is racy: that a work item is pending does not
mean changes since it was first submitted are guaranteed to be seen
when the work item begins (began) executing.
A better solution would be to have transmit_message be able to
determine whether there is unprocessed work. Then the work item can
be submitted unconditionally.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Uses of k_work_pending are to be replaced by k_work_is_pending which
conforms to current proposed naming guidelines.
Both uses in this file are fragile: that a work item is pending does
not mean changes since it was first submitted are guaranteed to be
seen when the work item begins (began) executing.
As long as this module is expected to be replaced by tcp2 it doesn't
seem worth trying to fix the logic, so just switch to the new function
name.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Checking whether a work item is pending before submitting it is racy:
the item may be finishing up in its handler, and essentially
completed, in which case chosing not to resubmit would leave work
unhandled.
In this case it appears very wrong, since the sole call site in
net_if.c has just initialized the work item, which is not permitted if
the work item is pending.
Remove the check.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The compiler generates a warning regarding a variable being used
w/o being initialized in certian configuration. According to the logic
that's not the case, so just add some initial value to the variable to
silence the compiler.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As network interface array size might be larger than the actual
network interface count, check this condition and ignore those
interfaces that are not in use.
We cannot know for certain how many network interfaces there
are at built time, as the total count is only available at runtime.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network interface index is very useful info to see in
debug prints so add those to debug output.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are sending a network packet and if the remote address
is not set in the context (which means that connect() has not
been called), then we must set the target network interface
to a proper value.
This is done so that when we select the local source address,
we might select the wrong interface if we have multiple network
interfaces in the system. In this case the packet would be always
assigned to first network interface regardless of the destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that the old API has been reimplemented with the new API remove
the old implementation and its tests.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The tcp2 infrastructure is using the legacy delayed work API, and
relies heavily on the transient state indicated by an estimate of
delayed time remaining to determine whether a delayed work item is
still active. While the wrappers for this work in most cases, one use
is unsanctioned: directly accessing the fields of k_delayed_work
structure to satisfy the calling parameters of the handler when
invoked directly.
The chosen solution for this specific need in the new API is to use a
schedule (rather than reschedule) operation, which leaves any previous
timer unchanged but allows immediate submission if the work is idle.
This changes behavior in that the resend is delegated to the work
queue, rather than done immediately. The former behavior can be
supported by further refactoring that turns the work handler into a
wrapper around a function that takes a connection reference, and
invoking that here, while the handler invokes it after reconstructing
the connection from the contained work item.
For now put in a hack that also uses the non-public fields of the
delayed work structure to implement the required behavior. The
complete fix if this solution is used requires replacing all use of
k_delayed_work in this module with k_work_delayable, leveraging the
new functionality of the API to avoid having to guess about the true
state of a work item based on its transient timer or flag states.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This lets an application detect when a PPP connection fails to establish
or terminates, so that the connection can be reattempted (for example,
by setting carrier off and on).
Signed-off-by: Jim Paris <jim@jim.sh>
In case the endpoint string provided by the application is longer or
equal to CLIENT_EP_LEN - 1, the strncpy() function will not add the NULL
terminator. As the endpoint buffer is treated as a C-string in other
places in the code, make sure it's NULL terminated by adding NULL
explicitly at the end of the buffer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure query string used by the lwm2m_rd_client is large enough to
encode any query string that can be sent during bootstrap/registration.
As the maximum query string length is related to the endpoint name,
which is limited by `CONFIG_LWM2M_RD_CLIENT_ENDPOINT_NAME_MAX_LENGTH`,
make the query string corellated to the value of this config.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds to network shell set of basic commands for UDP
protocol to receive and send datagrams.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check NULL value when we are trying to print link address
because the link address can be null.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the input string can be allocated from stack, we need to use
log_strdup() in net_pkt_hexdump() to print the extra string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This returns the available contingous space in the packet starting from
the current cursor position.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Avoid splitting lines when possible while keeping length below 100
chars. Some other minor style corrections.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The use of a single error variable for RX and TX operations has
shown the OpenThread code to be asserting in some conditions.
This commit splits tx_rx_result into rx_result and tx_result
to avoid such cases.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
If the network interface is down when trying to send a message,
return -ENETDOWN as we cannot send a message in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes some edge cases when using net_bufs with reserved
bytes (headroom) as fragments of a net_pkt.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
net_buf_max_len() provides the maximum number of bytes which can be put
behind the data pointer. This provides a save alternative to using the
size field of the net_buf structure directly, which does not take the
reserved bytes (headroom) into account.
This commit also replaces the usage of the size field in places where
size got used directly. Code has not been adjusted when it is easy to
recognise that the buffer does not have any reserved bytes, which is the
case after allocation or reset. Same goes for the faulty usage by
net_pkt as exposed by the last commit and begin fixed by a separate
commit.
Even though it would be cleaner, I decided to not rename the size field
to e.g. __buf_size in order to keep the amount of code changes low.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Added 3 utility functions :
- lwm2m_engine_update_period_service() which updates the period of a
given service.
- lwm2m_engine_update_period_min_observer() which updates the
min_period_sec for a given observe node.
- lwm2m_engine_update_period_max_observer() which updates the
max_period_sec for a given observe node.
Signed-off-by: Thomas LE ROUX <thomas.leroux@smile.fr>
* Added implementations of otPlatCAlloc and otPlatFree methods
necessary for the OpenThread in case of using EXTERNAL_HEAP.
* Added CONFIG_OPENTHREAD_DNSSD_SERVER option to allow enabling
OT_DNSS_SERVER feature.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
If user sets CONFIG_NUM_PREEMPT_PRIORITIES=0, then the priority
of the net_mgmt thread will be -1 which is the same as idle thread.
This will trigger assert in kernel as then the minimum coop priority
is -2 in this case. Remove the net_mgmt thread priority setting from
Kconfig file as it is low value and set the coop thread priority
the same way as other network threads are doing it.
Fixes#32375
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds implementation of socket option used to get
protocol used for given socket (e.g. IPPROTO_TCP). This option
is not defined in POSIX, but it is Linux extension.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch adds implementation of socket option used to get
type of given socket (e.g. SOCK_STREAM).
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Remove `OPENTHREAD_CONFIG_NCP_BUFFER_SIZE` define since it does not
exist in OpenThread.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
If userspace is enabled, then the TLS context needs to be
made a NET_SOCKET kernel object. Without this the userspace
cannot access TLS sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When handling CoAP Confirmable requests, there is a common
Acknowledgement initialization procedure that repeats for each
response packet initialization. This patch adds a function that
simplifies Acknowledgement initialization procedure encapsulating
repeating code.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Current 6lo implementation is unable to deal with scattered headers
(which should not happen usually, though it's a valid use case), so
let's just fail uncompressing such packet then.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Bogus fragmented packet could be sent without a FRAG1 fragment and hit
reassembly. Let's make sure this does not happen.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In case the current packet is the same as the cached one, let's not
unreference it while clearing the cache.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though ACK frames are not meant to reach L2 (drivers must ensure this
never happens), let's "re-enforce" the L2 by dropping them.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All addressing mode but IEEE802154_ADDR_MODE_NONE should have a valid
address. If not, the frame is invalid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch replaces magic numbers with COAP_TOKEN_MAX_LEN value and
removes unnecessary castings of token buffer type.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
RFC 7252 (CoAP) specifies value of the Version (Ver) field in the
protocol header to value 1. This patch defines value of the Version
field to make packet initialization easier. All samples and tests
are updated to use the new COAP_VERSION_1 field when initializing
a CoAP packet.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
When pushing received data to the application, check that app
was able to receive the data. If the application already closed
the socket, then we must free the received net_pkt in order to
avoid memory leak.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we cannot allocate net_pkt or net_buf, then check this condition
properly and release other resources that were already allocated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to make sure that when listening a connection establishment,
the connection gets cleared if we do not receive final ACK.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CoAP RFC (RFC7252) states that end points should support
the CoRE Link Format of discoverable resources as described in RFC6690
(refer section 7.2 of the RFC7252).
Fixes#31609
Signed-off-by: Kasun Hewage <kasun.ch@gmail.com>
After the latest upmerge, OpenThread requires explicit configuration
of the Master Key. This commit adds a Kconfig symbol that can be
used to setup its value. By default no Master Key is configured and
OpenThread generates a random one.
The Sockets Echo samples are configured with a fixed key with this
commit.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Only start the network logging backend if the autostarting
option CONFIG_LOG_BACKEND_NET_AUTOSTART is enabled.
Also, call init to make sure that the backend is initialized
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
