Verify the result of the fs_read() operation when handling filesystem
resources, and abort processing the resource in case of errors.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Reset the server timestamps after bootstrap to handle a case
where a new server instance has replaced the bootstrap server
instance.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
In case lwm2m_get_engine_obj_field() fails to find a corresponding
object field when iterating resource instances, simply skip that
resource instance when printing object instance contents.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Support write OMA TLV resource instance in LwM2M 1.1.
Accept OMA TLV as default content format.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
The network interface name that is copied to if_req struct might
be missing terminating null for IPv4.
This is fixing the IPv4 issue which was missed in previous fix attempt.
Fixes#74795
Coverity-CID: 368797
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We need to drop the cloned packet that was fed to the bridge instead of
returning directly from the function. Without this change we have a
buffer leak.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the packet cloning failed, bail out in order to avoid
null pointer access.
Fixes#81992
Coverity-CID: 434493
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Several arguments were added but have not yet been aligned with others
in the same function. Hence, use `getopt_state` to access `optarg`,
offering a better alternative to direct global access.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Instead of requiring one big buffer for formatting the output,
have a walk function that can be used to generate output by
one metric at a time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add collector parameter to metric creation macros so that it
is possible to bind the metric to collector already at built
time.
Also add optional user_data to metric macro calls so that user
can add optional data there. This will be used by network statistics
Prometheus support in subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Embed "struct prometheus_metric" to individual metric like
counter, gauge, histogram and summary. This way we avoid having
a separate base pointer in specific metrict struct. We also do
not need to search the specific metric from base metric as
we can simply use CONTAINER_OF() macro to get the base metric.
This embedding means that the counter, gauge, histogram and summary
metric define macros are changed as user does not need to create a
separate "struct prometheus_metric".
Convert the tests and sample to use the new macros.
Remove also the static from metric creation macros so that user
can decide whether it needs collector to be static or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is similar function as add, but will add the difference of
previous value and the new one. This can be used if we want to
periodically update the value with a new one but don't want to
keep track of the old one.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: format '%hu' expects argument of type 'int', but argument X has
type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
`_current` is now functionally equals to `arch_curr_thread()`, remove
its usage in-tree and deprecate it instead of removing it outright,
as it has been with us since forever.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for sap.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Add support for IP_LOCAL_PORT_RANGE socket option. The option
supports both IPv4 and IPv6 sockets although the type is IPPROTO_IP.
The option can be used to enforce the ephemeral port number selection
to be in certain range.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: field precision specifier '.*' expects argument of type 'int',
but argument X has type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Non-confirmable CoAP requests need lifetime tracking as well
so we can free the structure after a timeout.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When waiting for response after receiving the empty Ack, client
actually used way too timeout.
CoAP timeout only holds the timeout value in ms. t0 is the starting time.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
802.11 doesn't have specific constraints, it just says that listen
interval should be >=0 and it a 2 byte field.
3 as a typical DTIM value from nRF chipsets, so, remove the hardware
specific line and just set a failure.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The pull context LwM2M client's set_socketoptions callback is currently
unused and can't be set by a user. Add a public API to set the
pull context's client's set_socketoptions callback.
Signed-off-by: Andi Gerl <andi.gerl@exacttechnology.com>
Make sure that we cannot connect to IPv4 multicast or broadcast
destination address for a TCP socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is helper is only needed in socket multicast interface selection
where we need to get one address from the interface so that it will
tell (when getsockopt() is used), the interface IPv4 address where
multicast packets will be sent. This is private function which is not
needed in public headers so place the prototype to net_private.h file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Do the selection same way as in IPv6 so that if user supplies
unspecified destination address, the default interface is selected
the same way.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Some of the network tests require that source and destination
addresses are not swapped so allow test to control the address
swapping from the test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
After we take the true MTU into account, we need to send proper
number of bytes (multiple of 8) in one IPv6 fragment.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If PMTU is enabled, then use the MTU value from it instead of always
using network interface MTU.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If PMTU is enabled, then use the MTU value from it instead of always
using network interface MTU.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IPV6_MTU IPv6 socket option and implement getsockopt() and
setsockopt() calls for the option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IP_MTU IPv4 socket option and implement getsockopt()
call for the option. The IP_MTU option does not support
setsockopt() call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Send a network management event for a changed path MTU value.
Both IPv4 and IPv6 have their own events as we cannot mix these
because how the network event numbering space is implemented.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
