Packets are routed between OT and Zephyr net stacks.
For IPv4 these packets are managed by NAT64 by default.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
Fix the NM iface type check error, should use (1 << WIFI_TYPE_STA),
instead of WIFI_TYPE_STA. Same for WIFI_TYPE_SAP.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The standard does allow for a optional beacon payload, which gets lost
during scan, that could be interesting for the application to access
in the NET_EVENT_IEEE802154_SCAN_RESULT callback.
See section 7.3.1.6 in IEEE Std 802.15.4 for more information about
the beacon payload field. And section 7.3.1 and figure 7-5 about general
beacon frame format.
Signed-off-by: Fabian Pflug <fabian.pflug@grandcentrix.net>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `subsys/net/l2` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
If newly introduced interface type is unset then return the first Wi-Fi
interface as a fallback, this fixes backward compatibility.
Also, add NM APIs and use them for type checks, rather than directly
using the type enumeration.
Fixes#75332.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The sscanf() is not available for minimal libc so it cannot be used.
Use the net_bytes_from_str() that is provided for this purposes.
Fixes#75029
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In ethernet_recv(), it will call ethernet_update_length() to check for
ipv4 or ipv6 packet if it needs to get rid of the padding in the
packets. But for EAPOL packets, no need to do this, which may modify
the packet length of EAP type packet wrongly and leads to EAPoL
packets dropped in supplicant.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Split wifi interface into station mode and soft-AP mode, as there may be
station and soft-AP two interfaces that work concurrently.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
In case of ACD Probe/Announcement, all we need is to generate ARP
packet, we don't really want any cache entries to be created or searched
for. There was a bug, that a cache entry was created for the
Announcement sent, resulting in skipped ARP packet generation and
malformed packet being sent by the ACD module.
Therefore, simplify all this, by simply returning early in case of
conflict detection packets.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The autoconf module can now reuse generic address conflict detection,
which was added for all address types.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for IPv4 conflict detection, as specified in RFC 5227.
The new feature is optional and disabled by default.
Address conflict detection was implemented as a part of the IPv4
autoconf feature can be generalized to be available for all address
types.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The control and data settings are set improperly for packet filter
operation for sniffer operation. The change sets them properly.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
For default case it should print the option character provided by user.
Extra shell_help removed as it's being called in the caller function.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Support to set BSS parameter "max_num_sta" at compile and run time
Added support to configure `max_num_sta` BSS parameter.
Maximum number of stations allowed in station table. New stations will be
rejected after the station table is full.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Support for configuration of AP parameter "Skip inactivity poll".
Only build time setting is supported.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Support to set BSS parameter at compile and run time.
Added support to configure `max_inactivity` BSS parameter.
Station inactivity timeout is the period for which AP may keep a client
in associated state while there is no traffic from that particular client.
If a non-zero value is set, AP may choose to disassociate the
client after the timeout.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Remove the `_MAC` part because those Kconfig options enable only hash
algorithms, nothing MAC-related, and the `_ENABLED` part to align the
naming to the Mbed TLS defines (plus we don't need such a part).
As a bonus, enabling SHA-256 does not automatically enable SHA-224
anymore.
See the migration guide entries for more details on the practical
changes.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
When channel range is configured in scan params, get the
channel count from `chan_idx` instead of taking a difference
of start and end of the channel range. The `difference` method
fails in case of 5GHz band since channels may not be consecutive
numbers.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
According to RFC3927 and RFC5227, an ARP probe target HW address should
be set to all-zeroes:
"The 'target hardware address' field is ignored and
SHOULD be set to all zeroes."
Hence, we should allow the ARP probes to have all-zeroes target HW
address as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If time aware system has more than 1 gptp port, because there is only
one boolean to handle callback registering, a race condition can occur
for instance in case 2 master ports are waiting for a timestamp following
sending of sync message. More in details, callback may be unregistered
by port 1 while port 2 is waiting for timestamp event.
The issue is solved by declaring as much as boolean and struct
net_if_timestamp_cb as the number of declared ports
(=CONFIG_NET_GPTP_NUM_PORTS).
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Setting a ration of 0 breaks the computation of scaled_rate_offset
in gptp_md_follow_up_prepare().
According to IEEE802.1AS 10.2.2.3.9, when sent by clock master
entity, rate_ratio shall be equal to gmRateRatio. But since
in gptp_md_follow_up_prepare(), in case we are the grand master
clock, we take the assumption that clock source is the local clock,
we may set this ratio to 1.0.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Without this patch, in case time aware system is grand master capable
but is not the grand master clock and behave as a bridge so that it
shall ONLY relay SYNC and FUP messages from slave port to master port(s),
SYNC and FUP are mistakenly generated by ClockMasterSyncSend state
machine.
This patch only call ClockMasterSyncSend state machine in case a Grand
Master clock is present and is this time aware system.
This check is not described by IEEE802.1AS. Instead, according to
10.2.9.3, the SiteSyncSync state machine shall not take into account
information from ClockMasterSyncSend in case this time aware system is
not grand-master capable. Current implementation of ClockMasterSyncSend
state machine sends sync indication to the PortSync entities, instead of
sending it to the SiteSyncSync entity. And the SiteSyncSync state machine
does not make any check.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Commit 413eceeddb ("net: gptp: fix follow_up message correction_field")
breaks computation of follow up correction field in case time aware system
is not the grand master clock but behave as a transparent clock which relay
sync and follow-up messages from one slave port to one or several master
port(s). In this case, according to IEEE802.AS 11.1.3 and 11.2.14.2.3,
md sync send state machine shall compute the sum of link propagation delay
and residence time, expressed in grand master time base. Then this quantity
shall be added to last received fup correction field to build value of
correction field. This patch checks whether time aware system is the grand
master clock or not, and computes value correction field accordingly.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
It is meant specifically for configuration of the PSA crypto library.
The underlying PSA configuration items are guarded by the condition
that a PSA crypto provider must be present, which is the case when
either TF-M is in use or MbedTLS's PSA core is built as part of
the application image.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add support for gratuitous ARP transmission by Zephyr network stack.
This allows to prematurely fill the peer ARP table, so there's no need
to send an explicit request when peer needs to send an actual packet.
The gratuitous ARP is send when the network interface is brought up
(joins the network) or a new IP address is added. The gratuitous ARP
request is also sent periodically, with a configurable interval time.
The gratuitous ARP should also be sent whenever MAC address of the
interface is changed, but as Zephyr only allows to do this when
interface is down, this is already covered by the first case (interface
brought up).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`OPENTHREAD_PLATFORM_KEY_REF` should not be selected for RCP
architecture, as keys are handled on host's side and passed to
device over Spinel, and therefore they cannot be exported
on platform from reference with PSA Crypto API.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
When PPP moves to the 'Closing' state it sends up to configured number
of 'Terminate-Request' packets. It only moves to the 'Initial' state,
after running out of retransmits or when it receives a 'Terminate-Ack'
packet.
Signed-off-by: Markus Lassila <markus.lassila@nordicsemi.no>
Unicast RX stats
It represents total number of unicast (any type data, action or
any other unicast frames) frames received at firmware level.
The actual frames passed to host will be different as firmware
may drop packets or some packets may be dropped because of
errors.
Unicast TX stats
Transmission side the unicast packets count states the packets
handed over to firmware. The stats taken at firmware level.
Actual packets transmission may vary depending upon various factors.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
We were missing a helper function that can be used to check
whether the given function is the virtual VLAN interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use lock while accessing nm data.
One of the use case is while setting regulatory, it accesses nm data,
while from some other place also it can be accessed same time.
Protected the nm data processing.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Even though we are passing mandatory args from the shell registration,
due to use of getopt the check can be bypassed without the hyphenated
options.
So, enforce and fail if mandatory parameters aren't passed through
getopt.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Updates the linker script fragments under 'subsys' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Applications need to run a scan to identify the security
mode before attempting the connection which adds to the time
taken for connection to be established.
To avoid the initial scan, support auto security mode which will
enable STA to choose between WPA, WPA2 and WPA3, based on the
network configuration.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Since `NONE` is a valid option for key management in `connect`
command, we should remove the part in help text which says:
"valid only for secure SSIDs".
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
The commit 8256d02d3a introduced
getopt parsing for the wifi connect command
This needs to be updated for the wifi ap enable since ap
enable also uses the same parsing as connect.
The use of getopt removes the parameter ordering restrictions
Signed-off-by: Brad Kemp <brad@beechwoods.com>
