Define a custom IEEE802154 based L2. The user can then use those symbols
to implement their own 802.15.4 based L2, based on those symbols, w/o a
need to modify the Zephyr tree.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce a common config for all 802.15.4 based L2 implementations.
This way, any custom 15.4 L2 implementation will be able to
automatically enable use 15.4 driver, w/o a need to modify the actual
Kconfig.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`net_eth_vlan_enable()` allowed to use illegal vlan tag values, fix this
by disallowing any tag value higher or equal to 0xfff (which is a limit
for the tag and a reserved value).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Reading a set MTU from the used net_if when starting LCP.
This enables also other custom MTU/MRU to be set for the link than
the default CONFIG_NET_PPP_MTU_MRU (set by a ppp driver during
initialization).
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
The print specifier for `atomic_t` should be updated
to `%ld`, `%lu`, or `%lx` to account for the type
change of `atomic_t` to `long`.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
There was a problem with source address selection for ARP
retransmissions, when an ARP entry was already pending. In such case,
the `entry` value passed to `arp_prepare()` is NULL, which in result
caused the `current_ip` variable being used as the source value. The
problem with this approach is, that the `current_ip` is only set in
IPv4 autoconf, the Ethernet L2 does not set this variable. In result,
every retransmission of an ARP packet was sent with unspecified source
address, preventing the response from being handled.
Fix this by partially restoring the behaviour of the ARP source address
assignment from before IPv4 autoconf was introduced. If the ARP is sent
by the IPv4 autoconf, use the `current_ip` value provided. If entry is
not set, use the source IPv4 address set in the actual data packet.
Otherwise, search for a source address on the interface corresponding to
the `entry`.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
- Add a `log_strdup` to the role text output for logging V1
compatibility
- Fix style issues
- Change where the documentation refers to an OpenThread device as
"himself" to "itself"
Signed-off-by: Chris Pearson <ctpearson@gmail.com>
If CONFIG_NET_LOG=y is set, OpenThread will output the current OT
role whenever the state changes.
To simplify understanding of the log output, this change replaces
the numerical role ID with the text name of the role. This also
required a change to a documentation file to replace an instance
of a numerical ID.
NOTE: This is potentially a breaking change should anyone be using
test scripts that monitor the OpenThread state changes and look
for the numerical ID. This does not seem to be the case for the
Zephyr tests, however.
Signed-off-by: Chris Pearson <ctpearson@gmail.com>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/net and drivers/ethernet/Kconfig.e1000 settings
having `[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
The following settings has EXPERIMENTAL removed as they are considered
mature:
- NET_OFFLOAD
- NET_PROMISCUOUS_MODE
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/canbus, subsys/net/l2/canbus, and drivers/can settings
having `[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
OpenThread has lately got an option to provide a custom
crypto backend that replaces the default, based on mbedTLS
API. Implement a backend based on ARM PSA crypto API that
is better suited for applications willing to take advantage
of the ARM trust zone technology.
Add Kconfig option: OPENTHREAD_CRYPTO_PSA_ENABLE which
enables that backend.
Also, another Kconfig option:
OPENTHREAD_PLATFORM_KEY_REFERENCES_ENABLE, implied by the
former, which enables usage of key references instead of
literal keys in OpenThread. It will eventually allow
OpenThread applications to keep sensitive data such as
encryption keys in the secure storage, accessible from the
secure world only.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Fixes#38994, ARP messages were being sent to IPvXmcast MAC addresses
rather than the expected source MAC address or the broadcast address.
Signed-off-by: Robert Melchers <rmelch@hotmail.com>
As per #38352, we would like to start building out PTP (IEEE 1588)
support for superset of gPTP functionality in Zephyr. This is the first
step to abstract away some key interfaces from NET_GPTP umbrella to
NET_L2_PTP.
Signed-off-by: Alex Sergeev <asergeev@carbonrobotics.com>
Refactor IPv4 multicast address to MAC multicast address conversion
into its own function, so it can be reused by drivers as it is already
possible for IPv6 multicast addresses.
Signed-off-by: Markus Fuchs <markus.fuchs@ch.sauter-bc.com>
BT_SECURITY_LOW and etc. were previously renamed and are no longer
valid.
The original rename is in the following commits:
1c48757d94 (New names, deprecate old)
5f2a9ba8e4 (Remove deprecated names)
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemiconductor.no>
Rework NCP interface configuration and NCP sample. Remove
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_DEV_NAME and
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_ACM Kconfig
options in favor of chosen node zephyr,ot-uart usage.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Checks PAN ID for matching self address / broadcast, then the short /
extended address based on the used address mode.
Only when IEEE802154_HW_FILTER is not advertised by driver.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Note that the include to subsys has been moved from
under the drivers into subsys, as it is actually
the subsystem's job to make sure the include
directories are correct.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This migrates all the current iterable section usages to the external
API, dropping the "Z_" prefix:
Z_ITERABLE_SECTION_ROM
Z_ITERABLE_SECTION_ROM_GC_ALLOWED
Z_ITERABLE_SECTION_RAM
Z_ITERABLE_SECTION_RAM_GC_ALLOWED
Z_STRUCT_SECTION_ITERABLE
Z_STRUCT_SECTION_ITERABLE_ALTERNATE
Z_STRUCT_SECTION_FOREACH
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Change DSA API to use `net_if` directly to make API calls instead of
indirectly via `dsa_context` and `switch_id`.
Remove unused `switch_id`, `switch_enable_port`, and `dsa_get_context`.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
This provides a command line interface to query and modify
bridge instances, similar to Linux's brctl utility.
It can be used to inspect an application's bridge usage,
or manage a bridge of its own in a generic way.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This adds the ability to create Ethernet bridges for connecting
separate Ethernet segments together to appear as a single
Ethernet network.
This mimics the Linux functionality of the same name.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The openthread has enhanced features for periodic parent search,
this commit adds kconfig options to enable and configure these.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
6lowpan module can swap the original buffer with a newly allocated one
during decompression in case the decompressed header would not fit into
the original buffer. Therefore, storing the LL address offset and
restoring the pointer after decompression as it is done today is not
correct, as the new packet with decompressed IPv6 header will not
contain the LL header.
As the 6lowpan module doesn't deallocate the original buffer and
doesn't overwrite the LL header, its fine to use the original
pointers as they are.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Regular OpenThread upmerge to bring in a fix for a possible
infinite loop and support for DNS service subtypes.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Direct openthread API usage requires explicit locking,
which is also used internally.
Exposing a work queue through the openthread context allows
work to be submitted without the need to block other threads.
In particular with CONFIG_OPENTHREAD_MANUAL_START, application
logic can offload work which otherwise would need to wait for
the lock to become available.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The openthread initialization in turn calls platform specific
functions, lock the API during this step.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Allow caller to either set or receive various Ethernet Qbu
configuration options defined in IEEE Std 802.1Qbu-2016
specification.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow caller to either set or receive various Ethernet Qbv
configuration options defined in IEEE Std 802.1Qbv-2015
specification.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If radio driver supports transmission security we need an option
to disable transmission security which by default is done by OT stack
for Thread v1.2
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
SRP client and server require ECDSA to be enabled otherwise the build
fails. Select OPENTHREAD_ECDSA for both OPENTHREAD_SRP_CLIENT and
OPENTHREAD_SRP_SERVER options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
OPENTHREAD_SRP_CLIENT and OPENTHREAD_SRP_SERVER are Thread features and
not Thread configuration, so move them to Kconfig.features.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The OPENTHREAD_MAX_CHILDREN and OPENTHREAD_MAX_IP_ADDR_PER_CHILD options
make not sense for a MTD device. Make them depend on OPENTHREAD_FTD.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With the updates to mbedTLS Kconfig it is now possible to update the
OpenThread security configurations by disabling the mbedTLS prompt and
avoid stuck symbol selection.
As part of this, the OpenThread security selection has been reworked
into a choice which ensures only a single security selection can be
chosen.
And the OPENTHREAD_MBEDTLS itself has been made promptless to ensure
other parts of the build system can select a specific OpenThread
security implementation and disable user selection, if the module or
sample require such behavior.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
With the updates to mbedTLS Kconfig it is now possible to update the
OpenThread security configurations by disabling the mbedTLS prompt and
avoid stuck symbol selection.
As part of this, the OpenThread security selection has been reworked
into a choice which ensures only a single security selection can be
chosen.
And the OPENTHREAD_MBEDTLS itself has been made promptless to ensure
other parts of the build system can select a specific OpenThread
security implementation and disable user selection, if the module or
sample require such behavior.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Following commits will remove k_work from net_pkt, so convert
PPP L2 to use k_fifo when sending PPP data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Following commits will remove k_work from net_pkt, so convert
6locan L2 to use k_fifo between application and TX thread, and
driver and RX error handler.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit implements the OpenThread APIs to configure Enhanced-ACK
Based Probing in radio for a specific Initiator. This is needed for
Link Metrics functionality.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
