Updated controller code to use NULL keyword instead of
using 0 for pointers.
Change-id: I5ebff53dfeeba670fb7afe4740596b2662eb0334
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
There may be use cases where input and output is in big-endian rather
than little-endian. Introduce a native big-endian API to avoid
excessive byte order reversals in these cases.
Change-Id: Ia7b3e01bb0a07c4560b23f60c2f615ec614eb431
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are some use cases where all parameters are in big-endian. To
avoid excessive byte order reversals introduce a native big-endian
API.
Change-Id: I58fe9156c8819a3a43d715e70b6ba358bd2f844b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Do this in preparation of a purely big-endian API (all three
parameters as big-endian).
Change-Id: I815f74549caffd5ac387b5bb84e5851aa96639b9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
1. Reset the state when error occurs
2. This patch avoids checking for the AT_STATE_UNSOLICITED_CMD state
as the loop exits with possix error. So check for at->state
AT_STATE_START is sufficient for loop termination.
3. Fix different sign warning.
Change-Id: I80a1ca582112f1783690ac8a4125036bb706705f
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch adds support to initiate audio connection from the stack.
< HCI Command: Setup Synchronous... (0x01|0x0028) plen 17 [hci0]
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 7
Setting: 0x0060
Input Coding: Linear
Input Data Format: 2's complement
Input Sample Size: 16-bit
# of bits padding at MSB: 0
Air Coding Format: CVSD
Retransmission effort: Optimize for power consumption (0x01)
Packet type: 0x003e
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
Change-Id: I4f4c0788760c9bdaf75651825511ff6bcd06df59
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch handles the SCO disconnection part also unref the connected
corresponding ACL conn.
Change-Id: Ic2de68560cfd7d847e6011578c4424e24800d2ac
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch renames the 'conn' variable to 'acl' which is reference
to ACL connection for SCO connection.
Change-Id: I5f0a60bc5d80de08fa5b963cf545c71552909401
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Expose LE Encrypt helpers to applications. If software-
based controller is compiled-in, then controller's AES
hardware will be used by the exposed helper interface.
Change-id: I2bac9dfa5ccb3dd50447079affb52d920ae5bd81
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>.
Now that we have all the requested attributes of the service, form
the response packet and send it.
This also renames create_attrib_resp() to create_attrib_list() since
it is basically creating the list of attributes based on the filter.
> ACL Data RX: Handle 256 flags 0x02 dlen 21
Channel: 64 len 17 [PSM 1 mode 0] {chan 0}
SDP: Service Attribute Request (0x04) tid 28258 len 12
Record handle: 0x10000
Max attribute bytes: 4096
Attribute list: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0004
Continuation state: 0
< ACL Data TX: Handle 256 flags 0x00 dlen 32
Channel: 64 len 28 [PSM 1 mode 0] {chan 0}
SDP: Service Attribute Response (0x05) tid 28258 len 23
Attribute bytes: 20
Attribute list: [len 17] {position 0}
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Sequence (6) with 5 bytes [8 extra bits] len 7
UUID (3) with 2 bytes [0 extra bits] len 3
RFCOMM (0x0003)
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x05
Continuation state: 0
Change-Id: I54ba00f7700cbb72182dce745d61f5281f83437a
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Move crypto related interface provided by the
software-based Controller bt_rand into separate file,
crypto.c.
Change-id: I9998a43fe45799b479969ca195f324199418b8c2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Use explicit path while including internal header files.
Change-id: Ide80eb23007574a7362850173ac227943bda21d5
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The current hci_driver.c contained all the software Link Layer
initialization code. To decouple HCI from the actual LL, most of the
functionality that is actually part of the LL has been moved to the
ll_sw folder, opening the possibility for future hardware-based LL
implementations.
Change-Id: I1b54d655568a4ec02409da2f1a0addb4d64beed0
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since this presents a risk of public Bluetooth address duplication in
the wild by compiling once with a particular address and then flashing
the same image to multiple devices, a decision has been taken to remove
that config option and replace it later with another mechanism.
Change-Id: I068db25b2996c2409630554b1819b6adc48226cd
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To present a common interface to both software and hardware Link Layers
the API in ll.h now lives in its own separate include/ folder.
Change-Id: I2b0ab0d11b47b9c35a5759bcc30f347e6c616648
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Declaring these as const lets the linker generate more optimal code.
Some extra care is needed with hci_ecc.c since it was overwriting the
send callback. Now the choice of send() call is done directly in the
bt_send() function
Change-Id: Iac74f5ee9bee097bbb34c11bd13d1d886700f5cc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Retrieves the record specified by the record handle, go over each
attribute in the record and check whether the attribute is there
in the list provided in the request.
Change-Id: I8f09e0fbb7811a20bb25dc0029cd7c79a9345c88
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
In preparation for future hardware implementations of the BLE
Link Layer, this patch introduces the BLUETOOTH_LL_SW
configuration option to specify that the default software
LL is to be built.
Change-Id: I8b9d5b5e0d2926d18f9e8c8f042a74326895bf95
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Handles the ServiceAttributeRequest, populates the attributes to be
searched in the record specified by the record handle.
Change-Id: I3b702eaf05615f795d32aa30dbfaf91f5b2ce560
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Rename all LL downstream API calls from radio_ to ll_ so that they
reflect the layer they are actually targeting. Additionally they have
been moved to ll.h so as to expose a proper interface.
Change-Id: I4fb3946597920c9fafaacb6d87d34d83d75e8f27
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove the H:4 packet type macros that were unused in this file.
Change-Id: If161ddbf2d3adb2871cadd76de0e6c3bb50a16db
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Report as Bluetooth 5.0 compliant controller as there are
no mandatory features.
Rename PDU types as per the changes in Bluetooth 5.0
Specification.
Change-id: I1363e054eafd37c2bdca0f69b2638c7edb785787
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Bluetooth device address is 48-bit, added Kconfig range
field to restrict input to 48-bit hexadecimal value.
Change-id: I650343eab5809535137e164e783c9dd4f3e2a6f2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig option to set the Controller's company id and
subversion number.
Change-id: I3508aba18bf0b79fd423c7b4142b6fc57eaf55d7
Signed-off-by: Matthias Ringwald <matthias@bluekitchen-gmbh.com>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add a Controller event that indicates everytime
advertisement event has been transmitted on air.
Change-id: I4722488bbfeca987e66983faf5b26467407a89c9
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add ARG_UNUSED on rssi_ready local variable when the RSSI
feature is compiled out.
Change-id: I04f8f11cbc3530f7b85ffa72f27373e213b6e35e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Now that we have all the records which has the uuids in the
service serach pattern, take the handle of each of those records,
prepare and send the service search response.
> ACL data: handle 256 flags 0x02 dlen 17
L2CAP(d): cid 0x0040 len 13 [psm 1]
SDP SS Req: tid 0x6b6f len 0x8
pat uuid-16 0x0100 (L2CAP)
max 256
cont 00
< ACL data: handle 256 flags 0x00 dlen 26
L2CAP(d): cid 0x0040 len 22 [psm 1]
SDP SS Rsp: tid 0x6b6f len 0x11
count 3
handles 0x10000 0x10001 0x10002
cont 00
Change-Id: I85ec8ee384d0bf8090265577ec3ef805e75d4766
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
From the response of read_local_supported_feaatures check if local
device supports eSCO packet type and update it to bt_dev.
Also added sco field in bt_dev
Change-Id: If85b3d24d327a6243318fad89a07375a8253f89b
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch includes handling AG network error i.e +CME ERROR and
report the error number.
Change-Id: I19a3158e44568ad0ad21fb0dd790ac2f554c0625
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
If mayfly enable is called before mayfly could be disabled,
then enable shall supercede disabling, the mayfly will
remain enabled. Any new mayfly enqueued by the caller that
tried to disable mayfly will be chain for deferred
executon under this condition.
The BLE Controller's connection update procedure broke when
mayfly implementation was updated to defer disabling until
all queued mayfly where completed. Mayfly is disabled
between ticker_stop and ticker_start calls to chain them
so that ticker does not power off counter h/w if the ticker
being stopped is last one.
This commit fixes the connection update procedure which
used the mayfly enable before mayfly disable could
complete.
Jira: ZEP-1839
Change-id: I07d34c90d193b5eca9762acd8b7272e8d7a78474
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Call to ticker_stop/update can fail under the condition
where in a role is being stopped but at the same time it is
preempted by the role event that also uses ticker_stop/
update.
Also if a role closes graceful while it is being stopped,
the radio ISR will process the stop state with no active
role at that instance in time. In this case just reset the
state to none, the role has already been gracefully closed
before this ISR execution. The above applies to aborting a
role event too.
This commit adds code to detect these conditions and
deterministically recover from it.
This commit fixes the assert observed while stopping
advertiser in the Bluetooth sample scan_adv.
Jira: ZEP-1852
Change-id: I51c8d6e212ef43e3526a199cf7b666a79729c732
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added Kconfig option to be able set public address. Seems
conformance testers look for valid public address.
Change-Id: I2c4f702117f99a42c9eef0133b46556a1c6d1496
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This allows to queue buffer to sent later in case it runs out of
credits so it no longer blocks the caller thread.
Jira: ZEP-1776
Change-Id: Ifa9b412f98889b50c0b889655d910520d11a4718
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves necessary functions that will be needed for queuing packets
while waiting for more credits.
Jira: ZEP-1776
Change-Id: I030c696d432ec5be1b8e6b649e953da145929777
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Controller asserted in preparation of a role event due to
the previous (same or another) role event preparation being
not complete.
Mayfly callee was disabled in the previous event due to the
preparation time being short and previous start running
(higher natural priority) before all previous preparation
mayfly completed. The previous start disabled mayfly to
avoid Radio ISR latencies.
The current role event that asserted, preempted the
previous role (observer role with continuous scanning
window) which runs until preemption to maximise the Radio
h/w use (observer scanning until next interval). The
previous preparation mayfly is still disabled when the
current role preparation tries to use same mayfly instance
which should be free for a new enqueue.
This commit updates mayfly implementation so that mayfly
callee is disabled only after all enqueued mayfly instances
are run to completion.
Jira: ZEP-1839
Change-id: I3e0d31422db8e47b819189110b11ebd07dd09a7c
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The 100ms limit is only valid for controllers before version 5.0. For
a 5.0 controller the minimum is 20ms (0x00a0) which is already checked
for later in the valid_adv_param() function.
Change-Id: I0566a38ff855800d2e46e1d2c0a5c7bc9bc610cd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since there are no mandatory features in 5.0 when compared to a 4.2
compliant controller, report 5.0 as the current specification
implemented by the controller, to allow for features such as short
advertising intervals (< 100ms) which are already supported.
Change-Id: I1b138a86290a0422760a5e265cdd7b72d68f0048
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add support for detecting version 5.0, i.e. 0x09.
Change-Id: Ia2da513b65c420142fe97a4fa173bfa8045e9d75
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Filters the service records by going through all the records and
removes the one which does not have the uuid. So finally, only
the records which has all the uuids in the service search pattern
will be present in matching recs.
Change-Id: I1daa7c1b645efae2af66962999cc4c541891eff7
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
bt_gatt_get_mtu can be useful when GATT is used to transport another
protocol on top.
Change-Id: I328ef49138ccc4ce642b0019d08060f6022d5aa7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Handles the service search request from peer, parses the service
search pattern (which is a data elem seq of uuids to be searched)
and populate the uuids.
This also populates the registered records which will be filtered
based on the uuids in the pattern (which will be done in the subsequent
patch).
Change-Id: I9a232a7cfdd159325214ed13e98cc20be39a2e3b
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This is mainly done to avoid VLAs for looking up the service to handle
service search requests so that we can make sure that RX stack size
is sufficient for the defined no of services.
Change-Id: Ia99072615d9094a35bd7605ed2901e8018c0ecb2
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Instead of returning -EINVAL at runtime assert in case of invalid
parameters.
Change-Id: I40505f06a4c12445bfb1f1846ace1b592b6bc342
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Separate out data element structure header into type and size fields
Change-Id: I869ee1ea82db1f6d669bb905055135b7d63f3fa2
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
