Compat define is generated without value. This should not harm,
but since generated flag is a "Kconfig like" define, we migth need it
to hold a value.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Heuristic for populating an alias string for a subnode
of an alias node was wrong as there was no check if
alias already existed and string created was not in line
with device tree specfication (allowed chars: [0-9],[a-z], '-').
Fix these two points.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
We can replace the method get_node_label_string in DTDirective with the
global function get_node_label. This way we have a single place that
labels for defines are being generated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Don't based the compat to get_node_label, we can just figure out based
on the node address we are passed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This puts the priviledged stack at the end of RAM.
This combines PR #10507 and #10542.
Fixes#10473Fixes#10474Fixes#10515
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Standard device tree properties like 'reg-names', 'interrupt-names', and
'phandle' should be handled by other extract mechanisms or ignored. So
filter them out before we even call extract_property
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some boards depend on environment variables so we want to make sure we
do not attempt to build boards requiring additional setup.
Add the section below into the board YAML file, sanitycheck will check
the environment and will only run tests on that board if the variables
are defined.
env:
- VAR1
- VAR2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We've never handled boolean properties well, if we had a boolean that
existed we'd generate a define of 'True' and if the boolean didn't exist
than nothing would be generated. So there was no easy way to tell that
the boolean wasn't defined.
Now if we mark a property as boolean in the yaml, we will generate a
define for it regardless if it exists or not. If it exists we'll
set the value to 1, and if it doesn't to 0.
Fixes#8376
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a function that given a node address we get a list of compats back
instead of just the first. This is in prep for eDTS support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Before dtc 1.4.7 we'd get something like the following for an reg
property:
reg = <1 2 3 4>;
After dtc 1.4.7 we get:
reg = <1 2>, <3 4>;
We should handle both cases in the extract reg handling code. So if
we see a list of lists, we flatten it to a single list to normalize
the property.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Python's open() by default using "system character encoding", which
may vary from system to system (e.g. LOCALE=C aka "ascii" on bare-OS
systems, something on Windows, etc.). But Zephyr files are utf-8, so
read them as such, by explicitly specifying encoding.
This is similar to changes earlier done to another script in 94620bd.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To be able to collect all coverage reports from the "native"
applications in the first CI instance, let's also place the
nrf52_bsim testcases first. The order now is:
unit_testing
native_posix
*_bsim
anything else
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
run tests based on sub-testcases, for example:
sanitycheck --sub-test net.app.app_tcp4_client_hostname_fail
will run all the tests in tests/net/app/net.app.
Useful for re-running tests that are reported in testrail and in reports
generated by sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not check for board/toolchain combination and if a certain toolchain
is configured for a board, run with whatever toolchain we have.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CMake will translate from the toolchain variant 'gccarmemb' to
'gnuarmemb', but sanitycheck does not. This causes inconsistent and
therefore confusing behaviour between CMake and sanitycheck.
Until gccarmemb is dropped support for, do the same translation with
sanitycheck.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
scripts/dts_sanity/edts_ref.json_save has been pushed by error
in commmit a429104095
Clean it up.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The 'id' field was never used and tended to just have the compat of the
node. Lets remove it and removed some code in extract_dts_includes.py
related to it. Added a warning if 'id' is set in a yaml so we can
remove it going forward.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a new option as fixture in harness configurations for utilizing
sanitycheck to identify test cases that require external hardware
such as sensor, ble, networking for validation. The config will be
added to yaml files with unique fixture name to identify each hardware
and allow automation to trigger test execution on setup having the
specific fixture enabled. Also, remove the default required for type and
regex configs that is not essential in case of ztest based test cases.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Update menuconfig (and Kconfiglib, just to sync) to upstream revision
256e5b3e38e92 to get the fix below in, for an issue in an external
project. Also update genrest.py with a similar fix (the genrest issue
was what originally prompted it).
menuconfig: Improve/fix promptless choice handling
The code assumed that all parent (interface) menus always have a
prompt, which is false for items in promptless choices. This led to
a crash e.g. when viewing the symbol information for a symbol within
a promptless choice.
Promptless choices with children can show up "legitimately" when
people define choices in multiple locations to add symbols, though
this is broken in the C tools.
Use standard_sc_expr_str(node.item) instead of the non-existing
prompt for promptless choices. That way they show up as
'<choice (name if any>)>', which is consistent with how they're
shown elsewhere.
This commit also changes how choice names are displayed in
show-name/show-all mode, to the standard_sc_expr_str() format.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
For now we've used range properties as a pass through. However range
properties can translate from one address space to another. This is
typically used one address spaces translate from one physical bus to
another (For example going from PCI address space to internal SoC memory
map). However, we can also use this for cases where we want to reduce
duplication (For example with ARMv8-M for secure v non-secure MMIO
registers).
'ranges' takes either the form of:
ranges; /* pass through translation */
or:
ranges = <child-bus-address parent-bus-address length>;
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We use to walk to the full tree in search of addr/size cells. We should
only have to look at the parent of the node for these properties.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Given the path address to a node return the address/size cells. In
theory this should just be looking up the #{address,size}-cells in
the parent node, we'll make that cleanup next.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In case of having more than one reg, aliases would not generate
properly. Number of register at the end of define was missing.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
This script detects cases where ARRAY_SIZE can be used such as
where there is a division of sizeof the array by the sizeof its first
element or by any indexed element or the element type. It replaces the
division of the two sizeofs by ARRAY_SIZE helper macro.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
'coccicheck' target is used to initiate Coccinelle checker. It
can be called via four different modes that generate different
output corresponding the mode.
The four modes are:
* 'patch' proposes a fix, when possible.
* 'report' generates a list in the following format:
file:line:column-column: message
* 'context' highlights lines of interest and their context in
a diff-like style. Lines of interest are indicated with '-'.
* 'org' generates a report in the Org mode format of Emacs.
The 'coccicheck' front-end can be called with suitable arguments:
* --mode=<mode>: specify the mode for processsing.
* --cocci=<path/to/foo.cocci>: specify the SmPL file to use.
* --verbose=<1>: enable verbose output.
Run `./scripts/coccicheck --help` for more detailed info
on various options available.
With the above arguments the coccinelle transformation engine
runs on the entire/part of the source code tree depending on
various options supplied to the coccicheck sanity checker.
More detailed documentation can be found at:
doc/application/coccinelle.rst
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
When the code partition is not at the beginning of the flash, the load
offset is wrongly computed. The address in the device tree is already
relative to the beginning of the parent node, ie the beginning of the
flash memory space. There is therefore no need to subtract it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The node name parsing for the _LABEL #define does not parse the unique
node portion in the same fashion between @<unit_address> and _<number>.
This change normalizes the two modes.
Signed-off-by: David Leach <david.leach@nxp.com>
Update Kconfiglib (and menuconfig, just to sync) to upstream revision
8087311cd91be to get the following fix in, for an issue reported by
pfalcon:
Give clearer errors for bad endchoice/endif/endmenu nesting
An endchoice/endif/endmenu with no corresponding choice/if/menu
generated a cryptic 'unrecognized construct' parse error. Improve
the error message so that the problem is pointed out explicitly:
kconfiglib.KconfigError: Kconfig:37: couldn't parse 'endmenu': no
corresponding 'menu'
Reported in https://github.com/ulfalizer/Kconfiglib/issues/56.
This update also adds support for user-defined preprocessor functions in
Python, which could potentially be handy for DTS/Kconfig integration.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
According C99 the first 31 characters of an identifier must be unique.
Shortening the namespace of the generated objects to achieve it.
C99 - 5.2.4.1
MISRA-C rule 5.1
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This commit touches the C codebase and the python syscall generator.
The Z_GENLIST-macros expand to whole functions. Once expanded by the
preprocessor we notice a semicolon is put after the function body. But
ISO C99 does not allow extra ‘;’ outside of a function. Though this is
accepted by GCC with GNU extensions, it is not by Clang.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
The $(readlink -f) call in scripts/west doesn't work on macOS.
Let's just ensure compatibility on all the platforms by moving
scripts/west-launcher.py to scripts/west, making it executable on
macOS and Linux, and launching it from the Windows doskey macro.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Update to the latest west. This includes a new 'attach' command. There
are also multi-repo commands, but those won't get exposed to the user
unless they install Zephyr using "west init" + "west fetch" (and not,
say, "git clone").
Replace the launchers; they now detect whether zephyr is part of a
multi-repo installation, and run the west code in its own repository
if that is the case.
This also requires an update to:
- the flash/debug CMakeLists.txt, as the new west package is no longer
executable as a module and must have its main script run by the
interpreter instead.
- the documentation, to reflect a rename and with a hack to fix
the automodule directive in flash-debug.rst for now
Signed-off-by: Marti Bolivar <marti@foundries.io>
If size or address cells happened to be 2 we'd get the wrong value since
we where shift the least significant 32-bit's up. Adjust the math based
on the value of the cell amount to fix things.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename address / size cell variable to clarify that its the number
of address / size cells.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
reg class is updated to take into account whole use cases
of reg extraction so extract_reg_prop could be removed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Parameter 'names' is provided as argument of several property
extract functions. Thought it is actually used only once.
Remove when not needed.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The size calculation for power of 2 MPUs were incorrect.
The calculation was not taking into account the amount of padding
the linker does when doing the required alignment. Hence the size
being calculated was completely incorrect.
With this patch the code now is optimized and the size of
partitions is now provided by the linker.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
New shell support features like:
- multi-instance
- command tree
- static and dynamic commands
- multiline
- help print function
- smart tab (autocompletion)
- meta-keys
- history, wildcards etc.
- generic transport (initially, uart present)
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
