Use hex file for flash command, instead of elf file. This allows to
flash signed firmware, which is not available in elf format, by
specifying --hex-file command line argument.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far zephyr.elf file was hardcoded in cmake files. Remove it from
there and use cfg.elf_file from python, which can be overwritten by
specifying --elf-file command line option.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
dtlib is meant to be general and anything-goes re. property values, but
edtlib can be pickier. Check that all 'status' properties have one of
the values listed in the devicetree specification
(https://www.devicetree.org/specifications/), and error out otherwise.
This will get rid of the 'status = "ok"'s (should be "okay") that keep
cropping up.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We should only assume a GPIO specifier is either named <FOO>-gpios or
gpios. Any other form like ngpios should not be considered a GPIO
specifier. especially since 'ngpios' is the standard property name for
the number of gpio's that are implemented.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Most of the logic for initializing 'clocks' and 'pwms' is the same and
can be shared. Add an EDT._simple_phandle_val_list() helper function for
initializing 'clocks', 'pwms', and any other properties on the form
<foo>s = <phandle value phandle value ...>
where the nodes pointed at by the phandles are expected to have a
'#<foo>-cells' property.
This should make it easier to add similar properties.
There's still some code duplication in the classes (PWM, Clock, etc.),
but also some differences, so I'm wondering if requiring a class for
each might be okay. Maybe some more class-related stuff could be
factored out later.
Piggyback some related cleanup:
- Have _phandle_val_list() take the name of the #foo-cells property
instead of a function for fetching the value. The pattern is always
the same.
- Have _add_names() just take the "foo" part of "foo-names". Same
pattern everywhere.
- Clean up some redundant comments for stuff that's already documented
in docstrings
- Fix error messages printed by _named_cells() ("GPIOS controller" ->
"GPIO controller", etc.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Zephyr verifies if it is built from a west-initialized directory.
The message changed in west@c08061cef1c7b0e19a58a82db731098e2f4bba4a.
Closes#18034.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Zephyr codebase standardizes in UTF-8 as file encoding. To
accommodate this, we explicitly pass encoding="utf-8" to Python's
open() function, to be independent of any locale setting of a
particular system (e.g., CI/build systems oftentimes have "C",
i.e. ASCII-only, locale). In a few places, we lacked this parameter,
so add it consistently.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The pytest.raises context manager is now returning an ExceptionInfo
whose str() doesn't contain the str() of the underlying exception
object. Take str(e.value) directly to make sure we're looking at the
exception string.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The main change is the elimination of the bootstrapper, a design flaw
/ misfeature.
Update the documentation to be compatible with the 0.6.x releases as
well. This has to be done atomically, as there were incompatible
changes. Make use of the versionchanged and versionadded directives
to begin keeping track of how these APIs are evolving.
(Note that west 0.6.0 will remain compatible with the extension
commands in Zephyr v1.14 LTS as long as that is still alive. This
change is targeted towards Zephyr 2.0 users.)
This requires a bump in the shippable container and allows us to
simplify the west_commands test procedure.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add two bindings
test-bindings/multidir.yaml
test-bindings-2/multidir.yaml
and a new test-multidir.dts with two nodes that use them.
Verify that the two bindings were found by checking the
Device.binding_path attribute for the two device nodes.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
gen_defines.py and edtlib.py were recently added in
commit 62d5741476 ("dts: Add new DTS/binding parser").
The old extract_dts_includes.py script allowed for multiple
dts bindings dirs. Let's add that functionality to the new
scripts as well.
Signed-off-by: Michael Scott <mike@foundries.io>
Add a new sifive,plic-1.0.0 binding that inherits from the riscv,plic0
binding. The new binding adds a required riscv,ndev property, which
gives the number of external interrupts supported.
Use the new binding for microsemi-miv.dtsi (with a value of 31 for
riscv,ndev, from http://www.actel.com/ipdocs/MiV_RV32IMAF_L1_AHB_HB.pdf)
and riscv32-fe310.dtsi (which already assigns riscv,ndev).
Also remove a spurious riscv,ndev assignment from
riscv32-litex-vexriscv.dtsi.
Also make edtlib and the old scripts/dts/ scripts replace '.' in
compatible strings with '_' when generating identifiers.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If we are doing a nightly build we can utilize a large (over 50G) of
disk space just to generate the list of tests to build. We need to
optimize this so as we finish building the initial pass we clean up
as we go and only keep around the files we need (like .config,
generated_dts_board.conf, CMakeCache.txt, etc).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The content of subsys/fb/cfb_fonts cannot be replicated by the existing
script due to lack of positioning options and use of a full-color frame
buffer, which affects the generated bitmap. Switch to the solution used
in the original script, add the required options, and document the
process of regenerating the fonts.
This commit also determines the required bounding box for the glyphs to
be sure that the user-provided value is sufficient to avoid partial
characters. Ideally the calculated width and height would be used for
font characters, but this would require significant restructuring of the
script to make calculated values available at the point where the
arguments are used to produce output.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The output of this script is intended to be put into an implementation
file, where the font data is accessed by index to an array maintained by
the linker script. There is no need for protection against multiple
includes, and the font data array should not be a global symbol.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
We generated a define for each instance to convey its existance of the
form:
#define DT_<COMPAT>_<INSTANCE> 1
However we renamed all other instance defines to be of the form
DT_INST_<INSTANCE>_<FOO>. To make things consistent we now generate a
define of the form:
#define DT_INST_<INSTANCE>_<COMPAT> 1
We also now deprecate the DT_<COMPAT>_<INSTANCE> form and fixup all uses
to use the new form.
Fixes: #17650
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new DTS/binding parser to scripts/dts/ for generating
generated_dts_board.conf and generated_dts_board_unfixed.h.
The old code is kept to generate some deprecated defines, using the
--deprecated-only flag. It will be removed later.
The new parser is implemented in three files in scripts/dts/:
dtlib.py:
A low-level .dts parsing library. This is similar to devicetree.py in
the old code, but is a general robust DTS parser that doesn't rely on
preprocessing.
edtlib.py (e for extended):
A library built on top of dtlib.py that brings together data from DTS
files and bindings and creates Device instances with all the data for
a device.
gen_defines.py:
A script that uses edtlib.py to generate generated_dts_board.conf and
generated_dts_board_unfixed.h. Corresponds to extract_dts_includes.py
and the files in extract/ in the old code.
testdtlib.py:
Test suite for dtlib.py. Can be run directly as a script.
testedtlib.py (uses test.dts and test-bindings/):
Test suite for edtlib.py. Can be run directly as a script.
The test suites will be run automatically in CI.
The new code turns some things that were warnings (or not checked) in
the old code into errors, like missing properties that are specified
with 'category: required' in the binding for the node.
The code includes lots of documentation and tries to give helpful error
messages instead of Python errors.
Co-authored-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
--deprecate-only sounded like a command to "only deprecate (something)"
to me at first. --deprecated-only might make it clearer that it's about
only generating deprecated stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Any fatal error will print "ZEPHYR FATAL ERROR" now, so
we don't have to maintain a set of strings in the
sanitycheck harness.py
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is now called z_arch_esf_t, conforming to our naming
convention.
This needs to remain a typedef due to how our offset generation
header mechanism works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This new flag will indicate that the kernel object represents
an instance of a device driver object.
Fixes: #14037
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
No binding has anything but 'version: 0.1', and the code in scripts/dts/
never does anything with it except print a warning if it isn't there.
It's undocumented what it means.
I suspect it's overkill if it's meant to be the binding format version.
If we'd need to tell different versions from each other, we could change
some other minor thing in the format, and it probably won't be needed.
Remove the 'version' fields from the bindings and the warning from the
scripts/dts/ scripts.
The new device tree script will give an error when unknown fields appear
in bindings.
The deletion was done with
git ls-files 'dts/bindings/*.yaml' | xargs sed -i '/^\s*version: /d'
Some blank lines at the beginning of bindings were removed as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit adds a DTCM (Device Tightly Coupled Memory) section for
Cortex F7 MCUs. The Address and length is defined in the corresponding
device tree file.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
In order to make sure that the build works in folders that require a UTF
encoding, make sure that both CMake and the various Python scripts that
interact with each other on files use the same encoding, in this case
UTF-8.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We don't use the DT_FLASH_AREA_*_LABEL defines today so lets mark them
deprecated until we actually need something.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This script is looking for a hyperspecific error (mismatched padding
when linking into two simultaneous output sections) that bit us once,
in an era where the linker scripts were less unified. We haven't seen
it crop up since, and multiple platforms have changed the way they do
this anyway.
It's needless complexity. Junk it.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In a3bea8872b (PR #16352)
_bt_br_channels_area was added to the code but not the
sanitycheck sections whitelist => Add it
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In c20ff1150f
and 5f19c8160a
(PR #16897)
_bt_settings_area was replaced with _settings_handlers_area
Update sanitycheck sections whitelist accordingly
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The code to sanitize the generated font path by removing bindir
improperly stripped the first character of every argument when --bindir
was not provided, corrupting the command documentation when fonts are
generated manually. Only sanitize if --bindir was provided with
non-empty content.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
* Remove dead code that referenced 'generation' but didn't do anything
with it
* Replace looking at 'generation' with a simple check for property
starting with # (for things like #address-cells, etc) or ending in
-map (for things like gpio-map) to skip
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
uint8-array is the name for what the devicetree specification calls a
bytestring.
The original parsing code treated square brackets as equivalent to
quotes or angle brackets, failing to interpret elements as hex-encoded.
This was a bug, corrected in this patch by processing content as a
sequence of hex-encoded bytes with arbitrary whitespace.
The original generating code emitted the property as individual
elements. Replace that with generation of a single structure
initializer, which is more useful in cases where the length of a
property value may vary between nodes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
For using alpha numeric property values in a devicetree node, we
need to match the values starts with a number. Current scenario will
return the value as a numeric literal if it starts with a number. This
will not work for a compatible like, "96b-ls-con" which is proposed in
issue #15598.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
sanitycheck --help mentions that west-flash requires device-testing
to be enabled (and indeed it does because DeviceHandler will never
be called where west_flash option is used. Let's generate an error
if west-flash is used w/o specifying device-testing.
Also cleanup help text which looks odd in both sanitycheck --help
and in the file itself.
Signed-off-by: Michael Scott <mike@foundries.io>
Several boards have multiple runners setup. We need a way to specify
which runner to use with sanitycheck. Introduce --west-runner option.
Signed-off-by: Michael Scott <mike@foundries.io>
We don't have any uses of this form of define so deprecate it for now.
If needed this should be DT_INST_<INSTANCE ID>_<COMPAT>_BUS_<BUS>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we've converted LED and SW to use DT_ prefix we can mark the
non-DT_ prefixed versions as deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we've converted all _GPIO_ to _GPIOS_ we can mark the _GPIO_
form as deprecated (same for _PWM_ / _PWMS_).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A number of minor issues with the 'fixed-clock' support:
* Fix the #clock-cells to be 0
* Fix nxp_ke1xf.dtsi to set #clock-cells 0 and the clock reference to
only be a phandle.
* Fix the generation script to only generate what it should for a
'fixed-clock'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
sanitycheck takes any "extra_config" list found in the testcase.yaml
file and generates an "overlay" file from it. This file is placed in
the per-test build directory and passed to cmake/kconfig.cmake through a
-DOVERLAY_CONF= option set in the (also) generated sanity-out/Makefile.
This commit moves this generated config overlay to a subdirectory one
level down from the build directory, otherwise kconfig.cmake picks it
up *twice*: once from the -DOVERLAY_CONF= option already mentioned above
and a second time because kconfig.cmake scans the build directory and
blindly picks up ALL files ending with .conf[*]. The second pickup is
problematic because kconfig.cmake currently gives it the top precedence,
even higher than anything the user espressed with --extra-args=CONFIG_*
Here's a quick and simple demonstration of the issue fixed by this
commit:
cd $ZEPHYR_BASE/samples/net/sockets/net_mgmt/
sanitycheck -T. -p qemu_x86 -b -v # --extra-args=CONFIG_USERSPACE=y|n
grep CONFIG_USERSPACE $(find sanity-out/ -name .config)
.net_mgmt.kernelmode/zephyr/.config: # CONFIG_USERSPACE is not set
.net_mgmt.usermode/zephyr/.config: CONFIG_USERSPACE=y
grep 'Merged configuration' $(find sanity-out/ -name build.log)
Without this commit, attemps to override anything with
--extra-args=CONFIG_ are silently dropped on the floor.
For more background this issue was found while using the recipe in
commit message 4afcc0f8af
[*] picking up all .conf files is debatable but a much bigger debate
with backward compatibility implications. This small fix makes
absolutely zero difference to anyone or anything not using sanitycheck.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
