Make some no-op log messages require 'west -v blobs ...'.
The current implementation won't scale as the number of blobs goes up.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This option does not apply to 'west blobs clean' or 'west blobs
fetch'. Error out if it is given to either of those.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Make it consistent with the usual argparse style by using lower case
and no period at the end.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The help text is mixing up 'blobs' with 'modules', and doesn't
document the new behavior that uses all modules when nothing is
mentioned. Fix both issues.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Without this patch, "west blobs -h" says:
{list,fetch,clean} Select the sub-command to execute. Sub-commands
available: - list: list binary blobs - fetch: fetch and store binary
blobs - clean: remove fetched binary blobs
With this patch:
{list,fetch,clean} sub-command to execute
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
esp32 platforms can overflow their dram0_1_seg so add that section name
to the overflow check in twister. We were seeing this with the
samples/arch/smp/pi/sample.smp.pi test and would get:
zephyr_pre0.elf section `noinit' will not fit in region `dram0_1_seg'
region `dram0_1_seg' overflowed by 17456 bytes
Fixes#49164
Signed-off-by: Kumar Gala <galak@kernel.org>
Commit 57538262e1
(" scripts: kconfig: tweak dt_chosen_label") forgot to update the
docstring for a function whose behavior was changed. Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It looks like the latest release, 0.14.2, changed the contents of
JLINK_SDK_NAME as it was before 0.14.0 release. That means that the
previous fix is only applicable to a couple of releases: 0.14.0/0.14.1.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The introduction of sysbuild and west build / flash / debug / etc.
support raises questions regarding how to handle user specified runner
arguments.
Some arguments may be acceptable for all domains, whereas others are
only valid for a single or few domains in a multi domain build.
Therefore, consider the usages of runner specific options experimental
when applied to multiple domains.
The following warning is printed to the user when using runner specific
arguments on multiple domains:
> WARNING: Specifying runner options for multiple domains is
> experimental.
> If problems are experienced, please specify a single domain using
> '--domain <domain>'
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The `<module>/zephyr/blobs/` folder, as well as any additional
sub-folders that might be required under `blobs/` may not exist when
fetching a blob. Ensure that the folder exists, create it if it doesn't.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new "clean" blobs sub-command deletes any blobs present on the
filesystem.
Also improve the help text for sub-commands.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To align with other commands, such as "west update", convert the
accumulative -m option into an nargs="*"-type one that takes the list of
modules directly without a flag.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Instead of both listing and fetching only the blobs in the
modules listed by the user in the command-line, default to
listing/fetching them all for ease-of-use and consistency with other
commands. Remove the --all options since it's meaningless now.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds an extra layer to match the revision part where this
needs to be of permitted patterns as described in.
cmake/modules/extensions.cmake. Without this, the matching
may produce undesirable results. For example, if there is
a file named qemu_x86_tiny_1.conf, the testplan will create
a board name qemu_x86@tiny.1 (which is definitely not correct).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove ZEPHYR_BASE as default root in list_boards.py.
This allows list_boards.py to be used to only print boards at given
root(s) without printing Zephyr default boards.
Secondly it remove the need in list_boards.py to have any knowledge of
ZEPHYR_BASE.
The `west boards` command already has ZEPHYR_BASE knowledge and can
easily add ZEPHYR_BASE to the list of roots it is already constructing,
thus removing the need for knowing that ZEPHYR_BASE is always added.
Update boards.cmake to pass ZEPHYR_BASE as an additional arch root, as
arch.cmake has not yet been processed,which means ZEPHYR_BASE is missing
in ARCH_ROOT list at this point in time.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The motivation is to allow accessing array elements from device tree
properties in Kconfig.
* Add dt_node_array_prop and _node_array_prop functions to extract the
array elements from properties.
* Add 'dt_node_array_prop_int' and 'dt_node_array_prop_hex' keys to use
in Kconfig.
Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no>
On qemu_cortex_a53 with icount enabled, the qemu process will spin
hard at the end of its run (common with icount), but will also ignore
the SIGTERM twister is sending to terminate the (successful!) test
run. The resulting zombie spinning processes end up accumulating and
poisoning the test run.
Just use a hard KILL instead of trying to be a good citizen (and in
lieu of fixing the upstream qemu bug). I can't see why this should be
a problem.
Signed-off-by: Andy Ross <andyross@google.com>
Fix the missing logic of setting the flash_error flag when
caught the exceptions. And we should let the serial thread
can be run first if flash error. Otherwise the twister will
hang up while an exception happens on closing serial, after
the #47820 got merged. This mostly happens on frdm_k64f.
Fixes#49086
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Add parameter for possible extending in the future, --tool-opt
passes arguments to execution of the run service.
Ex.
--tool-opt=--arg='white space' --tool-opt=-r --tool-opt=12345
will be parsed as ['--arg=white space', '-r', '12345']
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Because we use INADDR_ANY by default now, specifying a net interface
is no longer needed. Remove it and remove the dependency of the
netifaces python package.
Fixes. #48584
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Add specifying the port for the remote cavstool remote service.
Ex.
west flash --remote-host {host}:{port} \
--pty {host}:{port}
Specify the port is optional when running west.
And another major change is now we have to specify the remote log
service by --pty to make it output the log message immediately.
Previously it will output directly. Why we make this change is
because this is more close to the behavior we use west flash.
Fixes. #46865
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
This patch introduces the basic infrastructure to list and fetch binary
blobs. This includes:
- The new 'blobs' extension command
- An implementation of the `west blobs list` command
with custom formatting
- A very simple mechanism for loading fetchers
- A basic implementation of an HTTP fetcher
In order to ensure consistency among the west extension commands in the
main zephyr tree, we reuse a similar class factory pattern that is present
for ZephyrBinaryRunner instances in the ZephyrBlobFetcher case. This
could be achieved with a simpler mechanism, but opted for consistency
before simplicity.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Instead of using strings, use pathlib's functionality to handle the
fact that it can have two different extensions.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
prevent `Wundef` warnings from occurring due to
missing CONFIG_ symbols and __cplusplus.
Signed-off-by: Christoph A Schnetzler <Christoph.Schnetzler@husqvarnagroup.com>
Currently, twister keeps on monitoring serial output until timeout
even if we have a flash error. And the error reason will be reported
as 'No Console Output(Timeout)', which is not accurate.
So add a flash_error flag to control if we need to monitor the output.
Signed-off-by: Guo Lixin <lixinx.guo@intel.com>
This is this initial sysbuild guide on what sysbuild is and how to build
a sample using sysbuild.
It provides an architectural overview of sysbuild.
Descriptions on how to use `west build` or `cmake` + `ninja` to build
projects with the sysbuild infrastructure.
Flashing is described through the use of `west flash`.
Extending sysbuild with additional Zephyr based applications are
described, and reference to CMake documentation for including non-Zephyr
based applications are provided.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Update to Sphinx 5.x, also update breathe since version 4.34 is the
first to officially support Sphinx 5.x.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This reverts commit 87c6789355, restoring
commit 3b341085a2.
Restore the original change now that the underlying issue has been fixed
in 6cfb18686e.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add the hearing aid sample to the footprint tracking for the
nrf52840dk_nrf52840 and nrf5340dk_nrf5340_cpuapp.
The sample should represent a simple hearing aid implementation,
and is thus a very good candidate for tracking the footprint
of LE Audio in Zephyr.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The boards command was not properly using the zephyr_module
functionality to obtain the board roots of all modules. Fix that by
moving the functionality required to the core zephyr_module file and
reuse it from external scripts.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
support to use board@revision as platform filter when running
twister, like "twister -p nucleo_f030r8@1 ...".
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
This file is no longer used by device.h, so let's avoid spending time
generating the content formerly in it.
In order to leave a pointer in place for users who are expecting to
see it or are pulling it into their own builds, however, replace its
contents with an #error directive that tells them what happened. This
can be removed later on when we expect people are used to the
transition.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add two helper macros:
- DT_FOREACH_HELPER
- DT_FOREACH_OKAY_HELPER
These are internal generated macros which will be used to define
devicetree.h APIs for iterating over every node in the tree, and every
node in the tree with status "okay", respectively.
We can use these new APIs to implement the functionality in
device_extern.h natively from device.h without requiring a generated
header. It will also be useful for other purposes later on.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Now that we've removed the label property from most devicetree nodes
the dt_chosen_label will end up returning "" in most cases. For the
small handful of cases that the function is used, return the node.name
instead as this matches what DEVICE_DT_NAME will do.
Signed-off-by: Kumar Gala <galak@kernel.org>
Replicate the devicetree dependencies into a sorted list. This ensures
that the structures added to the .__device_handles_pass2 section are
reproducible from build to build.
Tested with: west build -b native_posix tests/drivers/build_all/sensor
Without this change, two consecutive builds do not compare.
Signed-off-by: Keith Short <keithshort@google.com>
pylink 0.14.0 changed the class variable where JLink DLL library name
(libjlinkarm) is stored. This patch adds support for new pylink
libraries while keeping backwards compatibility.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The elf_parser library now generates a dot file with device dependencies
that can be later rendered using Graphviz. Each node in the diagram
contains the device label (taken from DT node). In some cases the label
property can be None, leading to build failures like:
```
line 273, in device_dependency_graph
text = '{:s}\\nOrdinal: {:d} | Handle: {:d}\\n{:s}'.format(
TypeError: unsupported format string passed to NoneType.__format__
```
This patch switches to node name instead, which will always be set to
some value. This value is actually what devices get now as a name if
they do not have a label set.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There is a breaking change in Junitparser 'TestCase.result' between
v1.x and v2.x.
Update check_compliance.py minimally to take into account this change.
This avoids relying on an outdated package.
Signed-off-by: Henri Xavier <datacomos@huawei.com>
This commit extends the west commands build, flash, and debug to support
--domain when having multiple domains (images) defined in a domains.yaml
build file.
The domains.yaml uses the following yaml format to specify the
build directory of each domain in the multi image build:
> default: <domain-n>
> domains:
> <domain-1>:
> build_dir: <build_dir-domain-1>
> <domain-2>:
> build_dir: <build_dir-domain-2>
> ...
`west <build|flash|debug>` has been extended to support
`--domain <domain>`.
`west build` calls CMake to create the build system, and if `--domain`
is given, then the build tool will be invoked afterwards for the
specified domain.
`west flash` will default flash all domains, but `--domain <domain>`
argument can be used to select a specific domain to flash, for example:
> west flash --domain mcuboot
`west debug` only a single domain can be debugged at any given time.
If `--domain` is not specified, then the default domain specified in the
domains.yml file will be used.
Users can still select a different domain, for example with:
> west debug --domain mcuboot
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
west build now support the sysbuild CMake project which allows users
to easily enable and build a bootloader together with any sample.
This will allow for cleaning up samples and boards which already does
custom multi image in a non-generic way, for example:
- mps2_an521 which includes a build for remote board
- samples/ipc/ which includes a samples for remote board
- esp32 which includes custom bootloaders
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The --tool-opt runner option is the recommended practice for allowing
runners to take additional arguments that are passed on to the
underlying tool. It exists because we don't want to add one runner
option for every single tool option that users might want to tweak --
that would be a nightmare.
Enough runners are using this option that it's time to promote it to a
common runner capability with consistent behavior, the same way we did
for the --dev-id option in the past. This removes boilerplate from
individual runner files and ensures consistent argument handling for
this option when it is supported.
Since --tool-opt is a bit long to type, and we've had some complaints
about that, take this as an opportunity to standardize on -O as a
short option equivalent for it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Even when BreakBeforeBraces is set to Linux, implying BraceWrapping for
AfterEnum to be true, clang-format version 12 puts the opening brace of
an enum declaration on a new line. [1]
One possible workaround would be to change AllowShortEnumsOnASingleLine
from false to true, but that would yield a different kind of unwanted
formatting.
clang-format version 13 and newer have this issue fixed, therefore
bumping the minimal version.
[1] https://github.com/llvm/llvm-project/issues/48983
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
If a device manually specifies that it depends on a second DT device,
add the first device to the second devices list of supported devices.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
