Fix the failures introduced in #72078 by manually enabling all the
hash algorithms as they used to be.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Move supported configuration items from the custom MbedTLS user
configuration file over to the Kconfig overlay.
The correct macros are then defined by the MbedTLS module according
to the values of the Kconfig options.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The overlay for the mimxrt1062 boards gnss alias is pointing
to the uart node rather than the gnss node. Adjust gnss alias
and node naming.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
hawkbit is rebooting automatically after installing a new update,
reflect that change in the docs.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
1) Replace master/slave in API for new terms in eSPI spec 1.5
2) Reflect eSPI VW change and macro changes across eSPI drivers
3) Update terms in eSPI driver sample and eSPI test driver
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
A scheduler fix for free memory usage on aborted threads is now using
a per-CPU dummy thread instead of a single stack-based one at startup.
These static thread objects need spots in the kobj bitmasks, and a few
tests are sitting right at the default limit (16 threads).
Signed-off-by: Andy Ross <andyross@google.com>
Move the kconfig options used to configure the interrupt
and wait time to the sample which uses them instead of
having them in the architecture code.
This options are very particular for this sample and not
really an API.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the readme as the sample works on native_sim,
and native_posix will be deprecated soon.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Move the LLVM fuzzing specific code out of the board main
file and into the sample.
That way we avoid needing to duplicate it for native_sim and
avoid having a very adhoc interface between the fuzzer test
and runner code.
Also ensure it works for native_sim and not just native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
With the update of MbedTLS to 3.6.0 the configuration files
(mbedtls/mbedtls_config.h, psa/crypto_config.h)
are not found anymore by default.
Make the ARoT's CMake target inherit from psa_crypto_config;
it defines what is needed to find the MbedTLS
configuration files.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add simple sample for the i2c target driver interface using the
i2c-target-eeprom as a target device.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed Harness's repeat field.
Added to schemas in e722db14ad,
together with the rest of harness_config.
Added to Harness when it was created.
Now present only in one sample -
mec15xxevb_assy6853 power management sample.
Could not find definitive proof whether it has ever been used.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Disable the quadspi mpu region of the nucleo_f756zg (like done on
nucleo_f746zg) when testing the samples/userspace/shared_mem
or tests/kernel/mem_protect/userspace
The stm32f7 cortex M7 has 8 MPU regions and the one for quadspi prevents
the testcase to PASS.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
A simple HTTP server sample application.
Signed-off-by: Emna Rekik <emna.rekik007@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds support for these NXP Multi-core boards for
IPC static_vrings sample using OpenAmp lib:
- lpcxpresso55s69
- mimxrt1160_evk
- mimxrt1170_evk
- mimxrt1170_evkb
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
In most cases these were defined as 1. Saving one byte for the rest
doesn't really justify the added complexity that comes with these
options. Removing them also simplifies the interface between HCI
transports/drivers and the host stack, which in turn helps pave the way
for having HCI as a proper Zephyr driver API.
Fixes#71907
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Currently the USB configuration of this sample is
selecting POSIX_CLOCK and being built by default with
USB_NATIVE_POSIX. This combination is currently not possible
due to mutually exclusive dependencies (the host C library)
which results in a configuration warning and POSIX_CLOCK being
forced to 'n'.
Let's instead disable POSIX_CLOCK in this sample USB config
overlay, until the USB native driver supports building
with embedded C libraries.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
With the changes made in pull request #68741, RPMsg service is
supported on stm32h747i_disco using the STM32 HSEM IPM driver. For the
sample to work, add device tree overlays to enable the mailbox and set
the shared memory appropriately.
Signed-off-by: Celina Sophie Kalus <hello@celinakalus.de>
Example of usage of HCI vendor specific Set Scan Request Reports
command, Scan Request Received Event and corresponding callback
to get application events. The sample application shows usage as an
alternative to extended advertisent saving precious RAM.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
With the deprecation of `BT_LE_ADV_OPT_USE_NAME` and
`BT_LE_ADV_OPT_FORCE_NAME_IN_AD` samples were updated to not use the
macro adding the device name in the advertising/scan response data
anymore.
Instead the name was explicitly added to the scan response data in
`periodic_adv` sample. But because it was using an extended advertiser
and was already adding data in the AD, the name should have been put in
the advertising data and not the scan response data.
Update the sample to add the device name in the advertising data.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add overlay, for nrf52840dk, that reserves RAM in internal
SRAM using the DTS definition.
The sample with such region can be built with the config
file nrf52840dk_nrf52840_ram_disk_region.conf, but, instead
of automatically allocating memory, the Disk driver will
use the pre-defined region provided by the DTS overlay.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add configuration for nrf52840dk that allows to create RAM
disk; this configuration does not reserve special region
in RAM using DTS but uses automatic buffer allocation, by RAM
Disk Drivers, according to RAM disk specification in DTS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Improve the default serial backend init level.
The documentation says to be bigger than the init level of the serial
device used. Since serial devices default to the kernel device init
level (50) then put this to default of application level drivers (90).
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Report more information and do not use `dev->name` so that what the
sample prints looks less similar to the GNSS dump logs.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The adc sample was in the root directory of the adc samples.
Move all the files to a subdirectory adc_dt.
Signed-off-by: Paulo Santos <pauloroberto.santos@edge.ufal.br>
Add support for using sysbuild for central_hr and
peripheral_hr samples so that hci_ipc sample is built
for nRF53x SoCs boards.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update central_hr sample to support using extended
advertising and hence be long range compatible on SoCs
that support Bluetooth Low Energy Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add LED blinking state to peripheral_hr indicating
advertising state, and LED On state to indicate connected
to a central device, respectively.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update peripheral_hr sample to support using extended
advertising and hence be long range compatible on SoCs
that support Bluetooth Low Energy Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the samples that were using those options by explicitly adding
the device name in the advertising data or the scan response data.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
For the last dozen commits, the role of usbd_class_node has actually
been taken over by usbd_class_iter. After cleaning up and merging
usbd_class_node and usbd_class_data, we can rename usbd_class_iter to
usbd_class_node to better reflect its role.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Since only usbd_class_node contains the class instance data, rename it
to usbd_class_data.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
