Remove pre hardware model v2 overlays present for RT11xx boards, that
were missed in the HWMv2 migration
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Unmount and remount filesystem during init, to verify that filesystem
remount works as expected.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use lower IRQ proirities for SoC peripherals, example UART,
to reduce ISR latencies on the IRQs processed by the
Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add preliminary support for nRF54L15 SoC. This commit does
not support Controller Random Number Generation and
Controller Cryptography (AES-128 encryption) commands, nor
does it support encrypted connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
BT_GAP_ADV_SLOW_INT_MIN and BT_GAP_ADV_SLOW_INT_MAX represent 1s and 1.2s,
respectively, in the extended advertising context, where the bit interval
is 0.625 ms. Using them for periodic advertising will result in a range
of [2s, 2.4s], as the bit interval for periodic advertising is 1.25ms.
Instead, BT_GAP_PER_ADV_SLOW_INT_MIN and BT_GAP_PER_ADV_SLOW_INT_MAX
should be used in this sample, and the range will become [1s, 1.2s].
Signed-off-by: Yuxuan Cai <yuxuan.cai@nordicsemi.no>
The sample won't build with PSA crypto enabled on non-secure platform,
causing disturbances in the CI.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A few samples were not limiting the CI execution scope in any reasonable
way, they should at least limit the execution to platforms that support
netif capability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Removes references to old tool documentation and refers users to
the list of supported applications instead
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
When the broadcast source unexpectedly disappears then the broadcast
sink does a remove source command and resets.
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
Enable execution of ADC driver tests on nrf54l15.
Overlay file for nrf54l15 already exists.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Align the name of the ETH PTP Config Status values
depending on the stm32HAL serie
to be the HAL_ETH_PTP_NOT_CONFIGURATED/HAL_ETH_PTP_CONFIGURATED
or HAL_ETH_PTP_NOT_CONFIGURED/HAL_ETH_PTP_CONFIGURED
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Support NXP ENET_1G on mimxrt1170_evk/mimxrt1176/cm7 platform.
Added test configuration sample.net.zperf.nxp_enet1g and
documented the usage of the ethernet driver with ENET_1G
peripheral.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Define the configuration to run the code_relocation
application on the external memory dual quad flash
of the stm32h745i/stm32h750b disco kits in XIP
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Get the flash device from the node compatible, instead of an alias.
This removes the need for the `spi-flash0` alias on every board with one
of these drivers.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Update the sample to use a camera shield with a camera chosen node.
This is not only because the camera nodes in the mimxrt1064 device
tree has been now moved to a separate mt9m114 shield but also to
make the sample more generic.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The default resolution of mt9m114 camera is now changed to 480x272.
Update the sample documentation to reflect this change.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Moves the rtio_ prefixed lockfree queues to sys alongside existing
mpsc/spsc pbuf, ringbuf, and similar queue-like data structures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add testcases for rk043fn02h_ct and rk043fn66hs_ctg shields to display
and LVGL samples, so these testcases will be built by CI.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This sample demonstrates how gpio pins can be used to power on
the system after a Poweroff, just like a reset pin.
The user only needs to add the STM32_GPIO_WKUP flag to the gpio pin
in "gpios" property of a DT device such a button or a sensor.
The samples Powers off the system after a delay then the user can power it
on with the user button that has the STM32_GPIO_WKUP flag in DT.
Only works on STM32 boards that support Zephyr POWEROFF
(U5, WL, WB, & L4 SoC series), & also have a user button whose GPIO pin
is associated with a wake-up pin (see PWR node in SoC dtsi file).
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
Deprecate the CAN controller bus-speed/bus-speed-data properties and rename
them to bitrate/bitrate-data to match the terminology used in other CAN
devicetree properties and the CAN subsystem API.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Monolithic build is enabled by default and it
requires the presence of the binary blobs.
CI will fail since it doesn't fetch them
to the environment. To avoid this
monolithic for BT app is disabled.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Zephyr's POSIX API is moving toward using the standard
nomenclature from IEEE 1003.1-2017 for as much as possible. In
particular, we want to have consistent naming between Zephyr's
POSIX API Kconfig options and the naming for POSIX Options and
Option Groups.
The Kconfig option CONFIG_PTHREAD_IPC has been (ab)used for a
very long time for a variety of different purposes. However,
the standard Option / feature test macro for POSIX Threads is,
intuitively _POSIX_THREADS. There is a corresponding sysconf()
key named _SC_POSIX_THREADS.
Annoyingly, the POSIX Option Group that corresponds to the
Option is POSIX_THREADS_BASE, which is a minor inconsistency
in the standard.
The _POSIX_THREADS Option already includes mutexes, condition
variables, and thread-specific storage (keys). So with this
change, we also deprecate the redundant Kconfig variables that
do not have a corresponding match in the standard.
- CONFIG_PTHREAD_IPC
- CONFIG_PTHREAD
- CONFIG_PTHREAD_COND
- CONFIG_PTHREAD_MUTEX
- CONFIG_PTHREAD_KEY
Additionally, create Kconfig variables for those configurables
which we are lacking:
- CONFIG_POSIX_THREADS_EXT
- CONFIG_POSIX_THREAD_ATTR_STACKSIZE
- CONFIG_POSIX_THREAD_ATTR_STACKADDR
- CONFIG_POSIX_THREAD_PRIORITY_SCHEDULING
- CONFIG_POSIX_THREAD_PRIO_INHERIT
- CONFIG_POSIX_THREAD_PRIO_PROTECT
- CONFIG_POSIX_THREAD_SAFE_FUNCTIONS
Some Kconfig variables were renamed to more properly match the spec:
- CONFIG_MAX_PTHREAD_COUNT -> CONFIG_POSIX_THREAD_THREADS_MAX
- CONFIG_MAX_PTHREAD_KEY_COUNT -> CONFIG_POSIX_THREAD_KEYS_MAX
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The functions fnmatch(), getopt(), getentropy()
and others are grouped into the standard Option Group
POSIX_C_LIB_EXT.
The getentropy() function is currently in-draft for
Issue 8 as of 2021.
https://www.opengroup.org/austin/docs/austin_1110.pdf
Not surprisingly, the POSIX_C_LIB_EXT Option Group
also includes the highly debated strnlen() function.
Moving that function will be deferred until later.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The POSIX_MAX_FDS option does not correspond to any standard
POSIX option. It was used to define the size of the file
descriptor table, which is by no means exclusively used by
POSIX (also net, fs, ...).
POSIX_MAX_FDS is being deprecated in order to ensure that
Zephyr's POSIX Kconfig variables correspond to those defined in
the specification, as of IEEE 1003.1-2017. Namely,
POSIX_OPEN_MAX. CONFIG_POSIX_MAX_OPEN_FILES is being deprecated
for the same reason.
To mitigate any possible layering violations, that option is
not user selectable. It tracks the newly added
CONFIG_ZVFS_OPEN_MAX option, which is native to Zephyr.
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_DEVICE_IO
Similarly, with this deprecation, we introduce the following
Kconfig options that map directly to standard POSIX Options by
simply removing "CONFIG":
* CONFIG_POSIX_OPEN_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options.
* CONFIG_POSIX_DEVICE_IO_ALIAS_CLOSE
* CONFIG_POSIX_DEVICE_IO_ALIAS_OPEN
* CONFIG_POSIX_DEVICE_IO_ALIAS_READ
* CONFIG_POSIX_DEVICE_IO_ALIAS_WRITE
Gate open(), close(), read(), and write() via the
CONFIG_POSIX_DEVICE_IO Kconfig option and move
implementations into device_io.c, to be conformant with the
spec.
Lastly, stage function names for upcoming ZVFS work, to be
completed as part of the LTSv3 Roadmap (e.g. zvfs_open(), ..).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The POSIX_CLOCK option does not correspond to any standard
option. It was used to active features of several distinct
POSIX Options and Option Groups, which complicated API and
application configuration as a result.
POSIX_CLOCK is being deprecated in order to ensure that Zephyr's
POSIX Kconfig variables correspond to those defined in the
specification, as of IEEE 1003.1-2017.
Additionally, CONFIG_TIMER is being deprecated because it does
not match the corresponding POSIX Option (_POSIX_TIMERS).
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_TIMERS
Similarly, we introduce the following Kconfig options that
map directly to standard POSIX Options by simply removing
"CONFIG":
* CONFIG_POSIX_CLOCK_SELECTION
* CONFIG_POSIX_CPUTIME
* CONFIG_POSIX_DELAYTIMER_MAX
* CONFIG_POSIX_MONOTONIC_CLOCK
* CONFIG_POSIX_TIMEOUTS
* CONFIG_POSIX_TIMER_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options that map directly to
standard POSIX Option Groups by simply removing "CONFIG_":
* CONFIG_POSIX_MULTI_PROCESS - sleep()
Similarly, in order to maintain parity with the current feature
set, we introduce the following additional Kconfig options that
map directly to standard POSIX Options by simply removing
"CONFIG":
* CONFIG_XSI_SINGLE_PROCESS - gettimeofday()
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Make `struct arch_esf` compulsory for all architectures by
declaring it in the `arch_interface.h` header.
After this commit, the named struct `z_arch_esf_t` is only used
internally to generate offsets, and is slated to be removed
from the `arch_interface.h` header in the future.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Added board nucleo_h7a3zi_q overlay file to permit testing the STM32
Digital Temperature Sensor.
Also added the board as integration platform to the sample.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Due to the recent changes in mbed TLS area, and due to adding new
certificates to the sample, the mbed TLS configuration has to be update
to be able to support them all.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Baltimore certificate expires in 2025 and Azure is in the transition
period for the time being to the new certificates. Add support for all
certificates needed in the sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The commit replaces flash_area_erase with flash_area_flatten,
as it allows to emulate erase and scramble data stored
on devices that do not provide erase callback.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit replaces flash_area_erase with flash_area_flatten,
as it allows to emulate erase and scramble data stored
on devices that do not require explicit erase before write
or do not provide erase callback.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The sample has been modified to work with devices that have
no explicit erase capability.
For that purpose printf messages have been modified to use
"Internal storage" rather than "Flash" when reporting status.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
