The OK response should be processed before entering CMUX mode.
Use UART ISR mode by default.
Fix warnings and errors produced by the sample.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Added a websocket connection sending network statistics to a client, to
demonstrate how this can be used to push data to the client as an
alternative to GET requests triggered by a Javascript timer.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Accept JSON payload including LED number and state, to demonstrate JSON
parsing and allow control of multiple LEDs if the board supports this.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Previously the dynamic resource in the http_server sample simply echo'd
the received data back to the sender. This doesn't demonstrate how the
dynamic handlers would be used in a more typical use case, where the
application may need to wait for the full request before acting on it or
creating a response.
Therefore two new dynamic resources have bee added: a '/led' resource
which can be used to control the board's LED (if present) via a POST
request, and a '/uptime' resource which can be used to query the kernel
uptime via a GET request.
The static resources are updated with some javascript to support
demonstrating the new dynamic resouces via a web browser.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
lz4 is moved as optional module, add step in README to add
as project filter to include into west manifest.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/65127
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
all the external modules related samples are part of samples/modules,
whereas lz4 is in parent. move it to sample/modules/compression/lz4
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Provide information how to configure mosquitto >= 2.0
for the mqtt publisher sample. Secondly, how to
configure ethernet interface in case the board is
connected directly to the host computer through LAN.
Signed-off-by: Jasper Jonker <jjasper.jonker@gmail.com>
This sample crates a touchscreen desk calculator based on
the sample state machine in _Practical UML Statecharts in
C/C++_ by Miro Samek.
Sample should build and run on any touchscreen-enabled
board with sufficient resources.
Tested on `disco_l475_iot1` board with
`adafruit_2_8_tft_touch_v2` touchscreen.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
PXP can flip image written to the frame buffer. Provide a mirror image
on the display by flipping the camera image horizontally. Enabled on
boards mimxrt1066_evk and mimxrt1060_evkb.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Add support for testing IPC between cpuapp<>cpuflpr. Some adjustments
have been done to be able to support two different remote targets for
the nrf54h20dk cpuapp.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Wi-Fi sample is stack heavy, so, by default increase the stack sizes to
work with any driver, esp. those use WPA supplicant like nRF Wi-Fi.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Wi-Fi shell prints scan results to the console taking time and this puts
pressure on net_mgmt Queue, so, increase both timeout and Queue depth to
handle crowded Wi-Fi channel (~200 APs).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Added a sample application demonstrating how to use the coap_client API
to download a resource via GET request.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Clean up before deprecating legacy device support.
The Linux kernel driver for this example has never been upstreamed or
implemented upstream. In general, 15.4 development does not seem to be a
big success, but if it comes up again, the protocol used by the example
will need to be redesigned anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. This sample does not
contain anything special that is not present in the hid-mouse or
hid-keyboard samples. It also makes no sense to port it to a new stack.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. Remove
cdc_acm_composite sample, which is not much different than cdc_acm, but
uses two virtual UART interfaces.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. Remove configuration
overlay for DFU and MSC, which does not add much value since we have
dedicated samples anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
"Video subsystem for Zephyr" is actually only defined as a driver
and the examples actually include <zephyr/drivers/video.h>.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Enable the Software Watchdog Timer instance on this board.
Now that SWT is enabled for this board and made the default watchdog,
sample.task_wdt.no_hw_fallback can be removed as is no longer needed.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The commit fixes soc_flash_nrf sample documentation where incorrect
partition names has been used and removes information of
CONFIG_TRUSTED_EXECUTION_NONSECURE affecting which partition is used
as this is no longer true.
The printf message reporting start of sample has been modified
to print "Nordic nRF5 Flash Sample" instead of
"Nordic nRF5 Flash Testing", which is more accurate for code
residing in samples.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This has been renamed in b6ed4ba761, the current entry is causing a CI
breakage for unrecognized platform.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add acmp pinctrl configuration to support ACMP driver for NXP frdm_ke17z
and frdm_ke17z512, tested 'sample.sensor.mcux_acmp' case.
Update the index.rst to add acmp description for ke17z.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Some boards claim `sdhc` support but use the `zephyr,mmc-disk`
instead of `zephyr,sdmmc-disk` compatible, with the former not being
compatible with this sample.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Move the check for valid disk drivers to compile time to enable twister
to run the configure step without errors.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Remove HTS221 sensor support from sensortile_box_pro as it has been ruled
out from final version. In fact, HTS221 is in the process of being
terminated and is not recommended for new design. The candidate replacement
is SHT40 from Sensirion, which is available also as a DIL24 adapter, which
can be plugged on sensortile_box_pro board.
See SENSEVAL-SHT4XV1:
https://www.st.com/en/partner-products-and-services/senseval-sht4xv1.html
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The documentation does not provide any guides on how to configure
the MCO pin, and responsebility is given to the application.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Rename usbd_device_set_bcd() to usbd_device_set_bcd_usb() to make room for
other BCD encoded values being set.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
In the sample, print the jesd216_bfp_density is expressed
in bits. add the unit to avoid confusion with the Flash
density expressed in bytes (dw2 entry)
Page size is for programming expressed in bytes, meaning
program execution on bytes basis or here page basis.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the configuration with a board overlay to execute
the samples/subsys/task_wdt on the nucleo_f091rc
Adjust the window-watchdog clock to PASS the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
