This allows to not compile data signing support if it is not
required. Reduces image size of peripheral sample app from
45772 to 44436 bytes.
Change-Id: I2cd3515973d1a70f478cbd68426ec84fd1645d19
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to specify which roles are supported. Broadcaster and
Observer roles are always supported.
Image size reduction for samples apps:
beacon 43148 -> 15196
central 46892 -> 46356
peripheral 47532 -> 45940
Change-Id: If260c13d63651b9b54df5bafc2c412b01dcb1eb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_gatt_subscribe requires setting proper value in the parameters ever
since indication support was introduced.
Change-Id: Ib78dac717874e51e21bc9f8ad10279ba9fe68097
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds gatt-discover-secondary which works as follow:
btshell> gatt-discover-secondary <uuid> [start_handle] [end_handle]
bt: att_find_type (0x00110d18): uuid 0x180f start_handle 0x0001 end_handle 0xffff
Discover pending
btshell> bt: bt_att_recv (0x001134a8): Received ATT code 0x01 len 5
bt: att_error_rsp (0x001134a8): request 0x06 handle 0x0001 error 0x0a
bt: att_find_type_rsp (0x001134a8): err 0x0a
Discover destroy
In addition to this gatt-discover is now renamed to gatt-discover-privary
to avoid any confusion with other discover types.
Change-Id: Iee1fdf3e72269b134e222b4a2c6b4329858e71b0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add discover type to bt_gatt_discover_params to the API is reduced to
just bt_gatt_discover, this should simplify adding support for
discovering secondary and included services.
Change-Id: Iadeed86fed115afee1340b2c09821d7fafdda0f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since atoi is available in libc this implementation can be removed.
Change-Id: I3cbb230916f382e27d59b503618b6291c8f0b691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
All the data shall be sent in little-endian byte order.
Change-Id: I6d4ab0760f92e202ddcb348d30f0d1f208f84f1d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If tinycrypt is compiled in use it for encryption instead of HCI LE
Encrypt command.
Change-Id: I9cf70540f14ed449bfda52c4a0901462b9a60fe9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Some tester commands require to response with current settings.
This patch is needed to properly track the changes in these settings.
Change-Id: Ib9c919e804decbe26ba6ab2a23f1c30d812f98ab
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This application can be used to list the PCI devices through the
console.
Change-Id: I3409ab9025b1f18a42b4cdd594fb095ebeac96f3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove the hard dependencies on EXPERIMENTAL symbol. Mark all the
symbols the relied on EXPERIMENTAL as EXPERIMENTAL in their prompt
Change-Id: I2779b0ed0776b3d510a8e2e44b35b83d7ad2377c
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This avoids the case where the system has multiple threads using
floating point and the threads were not properly configured to use
floating point. The misconfigured threads will only take the fault on
first use of a floating point instruction.
Change-Id: I2be9f9f145bc4e7659e07154021ccc237774897b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default for all architectures for ENHANCED_SECURITY is 'no' now
remove redundant config option.
Change-Id: Ib49b0bc7ea02aa2214fe45194393def8e021be01
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The default for all architecures for ENHANCED_SECURITY is no remove
redundant config from arm project configs
Change-Id: I3915da20e0ee8298d69865ad5b07f9d5c6d59200
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The default for all architecures for ENHANCED_SECURITY is no remove
redundant config from arc project configs
Change-Id: I14257a9f111790d506b106ef184e859b595cd009
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
ENHANCED_SECURITY is being used to enable security options the
projects that require security options explicitly enable these options
the dependency is not required.
Change-Id: Iec96e32bd7a5faa78672d355aad368f48b0ee087
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Change the default for ENHANCED_SECURITY to no in preparation for the
option to be removed.
Change-Id: Ic46730b187f361226064a3e205f48433b0bebdd7
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This macro is legacy from an early implementation of the init system
before the pure level was split into early and late phases remove it
now to avoid confusion going forward.
Change-Id: I6720874c840c9e14888fd6f411a8182e7420ca29
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Sample code for crypto library was duplicated and run twice.
Make the samples/crypto/ directory the contain of the source
and add the test logic and makefiles to the samples/microkernel/tests
referencing the source in samples/crypto.
Change-Id: I74d34de9351642fc4508e6bedd65e9b34676b01e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
minimal footprint disable timer and galileo requires a timer
Change-Id: I75c08775fd02bae1221ae4102bb9873060c8e85f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This introduces a generic driver set for console messages routed over
inter-processor interrupt (IPI) channels. These drivers bind to a
low-level IPI driver instance for the actual transport of messages.
ipi_console_sender installs printk and/or stdout hooks to forward
messages over IPI. There is currently no buffering on the sending side.
ipi_console_receiver installs an IPI callback which stashes incoming
characters into a ring buffer, which is monitored by a nanokernel
fiber. The fiber buffers the characters on a per-line basis and sends
them to either printk or stdout. Multiple instances of this driver
may be created in case you need to receive console data from multiple
CPUs.
Change-Id: Icebc110794fbe040f975101cd2ae6e78fb38645a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This enables passing the value to be used when writing to CCC so it can
be configure for indications in adition to notifications.
Change-Id: Ied89faed422e5c5ec60618d512dbd3f250f50b46
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables bt_gatt_subscribe to subscribe using indication value in
addition to notification.
Change-Id: I25f3b057e36b023a79fb66b11b70716ecc299ba9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This documents describes protocol used by external tester to drive
IUT. Currently initial version includes only Core and GAP services.
Change-Id: I2fcb366076313880116be2ead8916bb56a4b5910
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This big patch refactors tester application and put it in par with
updated tester protocol.
Change-Id: Ib016fdd0aac58a32bcdc67774843cf65d619947d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is a mandatory characteristic for GAP servie. It must be included
in GATT db.
Change-Id: I27c0c6d56f5303c3c5d1606d7656c51823f74989
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Enabling more sanity checks for the ARC architecture is an ongoing
process, disable failing tests for now.
Change-Id: I2fdabf98a5648120649649e3e32b849b79b48a7b
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of multiple make options etc. the test are now run
directly from make. User does not need to know various command
line options for setting up pipes.
Change-Id: I62a56aec75c55b970b246051dccdbf458389ab8d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate RX and TX buffer count was not set in example
applications prj files.
Change-Id: If48824e894bced3134391dae651f5997820de2c1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This variable is not used outside of c file.
Change-Id: I89b34fb6dd2cdd9dd111b6e33829f170d0ba00ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds possibility of setting advertise mode.
If no advertising mode is set, use default value (discoverable).
Change-Id: I86456ca52ad54a2fd4e4c6443a79087ddeb99ec6
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Bluetooth shell now supports advertising type set while starting
advertise.
Change-Id: I1e672b4c9315368dcef38398834acc5541c1843b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This makes shell a bit more convenient to use.
Change-Id: I50490eb3cf9434723737a71fb382316876ba6291
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This commands print list of all available commands.
On unknown command only short info about 'help' command is
printed.
Change-Id: I780f4fd8da7292192260a0e0af8815fe4e385ae2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Reduce usage of static variables making code easier to follow.
Also improve robustness in case of too many parameters provided.
Change-Id: I6a3f0162a4fb301479ed36c54ceca2967bb7e389
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If empty input was provided simply reprint prompt instead of printing
uage information. This makes it similar to linux shell.
Change-Id: Ie4d9e1e7cb011ddf14f490188335ddc44289ffcf
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use more robust approach when registering shell callbacks. Instead of
allocating maximum number of callbacks use exact memory which is
needed.
Change-Id: I96db75375e8d24df328adc0622c7817a3328f860
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Have a separate network buffer pool for received and transmitted
data. This way incoming packet flood cannot prevent from sending
IP packets out.
Change-Id: I2aae3bcb4ea63f36355f758de44532b167edfdb8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The CoAP test server runs in Zephyr and it receives CoAP messages
sent by coap client. The server can receive both plain or DTLS
encrypted CoAP messages. The server has various resource plugins
available but currently activates only three that are needed
by coap-client tester.
Change-Id: I6465a3a057eaf8b412699bba57bf7213548f0377
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This callback is called when security level of connection changed.
Change-Id: Ifec130163fffe291cd012c99247017bd31173660
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to define for each descriptor its own read handler.
Each string descriptor will use generic string read handler if
possible.
Change-Id: I468a082c6875400ec4515588131132ef27cc8082
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
