The demo can be configured to use different object types for its
synchronization: SEMAPHORES, MUTEXES, STACKS, FIFOS and LIFOS. To
configure a specific object, set the value of FORKS to one of these.
By default, the demo uses MUTEXES.
The demo can also be configured to work with static objects or dynamic
objects. The behaviour will change depending if STATIC_OBJS is set to 0
or 1.
By default, the demo uses dynamic objects.
The demo can be configured to work with threads of the same priority or
not. If using different priorities, two threads will be cooperative
threads, and the other four will be preemtible threads; if using one
priority, there will be six preemtible threads of priority 0. This is
changed via SAME_PRIO.
By default, the demo uses different priorities.
The number of threads is set via NUM_PHIL. The demo has only been tested
with six threads. In theory it should work with less than six threads,
but not with more without making changes to the forks[] array in the
phil_obj_abstract.h header file.
Change-Id: If7a0a34b216929a661245fd921a32ec413df8a4a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is a nanokernel sample and the MDEF file is not being used at
all.
Change-Id: I344adfa9394329258144de88521764974238f6a3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: I01c825c7eb44d6c321f2ffb88e8899da528921dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: Ied681b6059ad74f9d019054292c919a9f938e7d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the power sample and drivers with the new device driver power
management API using the existing logic
Jira: ZEP-954
Change-Id: Idd94232e458767635973e94e9fc673c01612c1e2
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
This fixes the UUID 128 bits to use the right byte order so it can be
decoded properly:
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32
Length: 21
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
128-bit Service UUIDs (complete): 1 entry
Eddystone Configuration Service (a3c87500-8ed3-4bdf-8a39-a01bebede295)
Change-Id: Ia4aacaf3557d74a248f63cbffb2adb73b076d38c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Excluded Quark D2000 because there is not enough RAM to
build the sample.
Change-Id: Icc772e0aaca2be8731eae8f986eed17782beb445
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
In many cases there is no need to define a macro for printing to
the console, just use the correct variant directly.
Jira: ZEP-240
Change-Id: I9952deda4bfc60424f01fca2443d037562d13d0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
.ini format supports long lines by prefixing the continuation with an
empty line. Adding a backslash makes the backslash part of the value.
Change-Id: I0a1ade3a6bdf12281e61d06e21d7233d4b624b48
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Boards that cannot support microkernel applications for memory resources
are excluded from microkernel build test.
qemu nios2 board is excluded from nanokernel because the Altera JTAG
UART not implemented yet
The kernel even logger buffer size for nanokernel was reduced from 1000
elements to 500 to allow the sample to fit in the Quark D2000 board.
Jira: ZEP-698
Change-Id: I0c5cc4c0bfc27940a758dcdd8ff0e01ad7f4b88c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
The sample applications for task profiling requires a default
project configuration file that can be used as reference for
any other board.
Quark SE dev board has some optional optimizations that can
be added using the prj_quark_se_devboard.conf file.
Some redundant symbols were removed to simplify the reading
of the configuration.
Jira: ZEP-698
Change-Id: I71d584d4454392e740f8b7a2c2f47206b76c3abf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This patch adds the micro support for the shell application
Change-Id: I4499a8660323f1fa61ff3bbf6e7a3026a7dba77a
Signed-off-by: Yong Li <sdliyong@gmail.com>
This commit removes deprecated APIs and replaces them with routines
that provide similar functionality without the flexibility originally
offered by the deprecated APIs.
Removing deprecated routines will help us to be prepared once the
new IP stack is ready (ZEP-793). Furthermore, this commit will also
help us to move our current DNS Client implementation to the lib/iot
directory, as specified by ZEP-847.
This commit removes the netz library from the DNS client sample
application. UDP functionality is replaced by primitive routines.
Specifically, the following changes are applied by this patch:
- Remove netz routines
- Remove app_buf data structure
- Introduce primitive data types in the DNS client code
- Introduce primitive network routines
- Add a header file containing configurable parameters
Jira: ZEP-793
Jira: ZEP-847
Change-Id: I0302133da77308f0cdd9ace2c0265e6b77673ff0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This is only meant for Contiki based IP stack.
Change-Id: I53cbcb7da0bd13ad87243fd70974cec0bd31072e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding these tests allows to find issue with QMSI update.
Change-Id: Ib247bee6a5dbdd60aed759b4908e9ae7751d5f78
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Change tags to reflect the type of samples, in this case it is all
about sensors.
Change-Id: I9f87e8683dd52fd757cd07ba5aa9fad99d17ab38
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove this app, since the sensor is not on the
board any more.
Jira: ZEP-763
Change-Id: I931acfe9f01b817bc0b24a4e0745bf759e53da90
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Don't try to detect the UART device manually, the list is missing a
bunch of boards (the Quark SE sensor subsystem variant, and both
Arduino 101 halves). There's a config variable for that.
Change-Id: I903e52dcb6025e5da824faadb5e4bc59221fa210
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This output is going to a terminal device, not a Unix tty descriptor
which will cook the output for us. Newline moves the cursor down.
Carriage return moves it to the start of a line. We need both.
Change-Id: If93d1a85d16cea93b4788fa55e694a7b77055bfe
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
- Set default board to Quark SE Debvboard
Jira: ZEP-690, ZEP-760, ZEP-782
Change-Id: I7f7cc45b527a116f88cf45796e46b429ae6f0060
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
HID over GATT Profile Specification states:
'The HID Device shall use LE Security Mode 1 and either Security Level
2 or 3.'
Change-Id: I2cfc1d9df76b4e8a8b2be7e87d18a7a5f3a19ea8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a sample that implements HID Service peripheral, the current
descriptor map is for a generic mouse so when connecting to a Linux box
it will create a input device like in the following output:
input: Test HoG mouse as /devices/virtual/misc/uhid/0005:1D6B:0246.0035/input/input98
hid-generic 0005:1D6B:0246.0035: input,hidraw2: BLUETOOTH HID v5.29 Mouse [Test HoG mouse] on XX:XX:XX:XX:XX:XX
Change-Id: Iccf07926ecc7363f4f47e1aa9df506a722e7e2d3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HoG service sample which can be shared with application
samples.
Change-Id: I6893ff409b254d0a616b2ba558fd629ce9edf1d4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a timeout to switch from configuration mode to beacon mode
following the recommended behavior from the spec:
The connectable timeout should be at the very least 30 seconds to let
enough time to user to start a configuration application.
Change-Id: I8f262c447ed1622e377fd7a05dde78c7b6b0560d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Treat the sensor subsystem as an independent board that can send
messages to UART and disable IPM and the messaging interface. IPM
can be enabled by applications that require such interface.
Fix all samples that are affected by this change to make sanitycheck
pass.
Jira: ZEP-451
Change-Id: I3df6af16adefaefec02b97778d6c68ffc920ac35
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed tests that will fail when using ISSM toolchain because
there is no g++ inside.
Example:
export ZEPHYR_GCC_VARIANT=issm
export ISSM_INSTALLATION_PATH=<ISSM PATH>
sanitycheck -p arduino_101 -p arduino_101_sss -p quark_d2000_crb \
-p quark_se_devboard -p quark_se_sss_devboard
Change-Id: I532d4f0e0095472cbf3428cb8355167a320a10a0
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Casual building in the tree leads to regular messups where I forget to
clean up the outdir first when switching platforms and the build fails
in strange ways.
Put a $(BOARD) subdirectory under outdir, and use that at $(O) when
the user does not provide an output directory.
Note that "make pristine" continues to remove the entire outdir,
including other architecutres (so as to make the tree pristine).
Also update a few spots where outdir was mentioned in documentation to
clarify the new scheme.
Change-Id: I365eec06ea440f17380b9f9ace5f5d34b9bed4dc
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Change the api argument format following the API
argument definition change in the driver. Some
definitions of CONSTANTs were changed accordingly.
Correct some comment error.
Jira: ZEP-642
Change-Id: I1b34640aa70f1597076e035e2b3b576d8337129a
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
