There are 174 RX/TX net pkt reserved, this make build fail
with some boards due to ram overflow (e.g quark_se_c1000).
Fix this by reducing NET_PKT RX/TX reserve to 100, which
seems fair enough for this use case. Moreover, don't think
there is any reason to have more NET_PKT than NET_BUF.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Current implementation of cdc_acm writes 4 bytes for quark_se at a time
and current code misses remaining data chunks. Make sense to check
written bytes for other platforms as well.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This sample application implements a web service that provides
zephyr console over websocket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a http(s) server that supports also websocket.
It sends back any data sent to it over a websocket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With usb_device support added to nrf52840_pca10056 board, sanity
check script compiles the sample net/wpanusb and it fails with
undefined reference for symbol cc2520_configure_gpios.
First of all cc2520 shouldn't be compiled at all for nrf52840
since it has its own ieee802154 radio. The prj.conf under the
sample samples/net/wpanusb simply hard codes the config
CONFIG_IEEE802154_CC2520=y and is causing the ieee80211_cc2520.c
file to be compiled. If it's removed from the configuration file
we get other errors. So it is not straight forward.
For now, as a workaround, exclude the nrf52840_pca10056 platform
until there's a proper fix.
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
After introducing of Virtual File System Switch (#6318)
it i required to mount file system in order to use it.
This patch add to the example code which mounts NFFS
file system in the example.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
In order to avoid confusion between "Unicode", UTF8, UTF16, UTF32,
and endianess of these encodings, rename all instances of "Unicode"
in the USB subsystem and samples into "UTF16LE".
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
btusb_bulk_out() reads the EPOUT buffer in multiple of 4 bytes because
of Quark's USB FIFO size limitation. But this has later been taken care
internally in the DW driver making it redundant in hci_usb.
Remove Quark specific handling and read the whole EPOUT buffer at once.
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
try_write() writes the whole net buffer to USB which sometimes is larger
than the maximum packet size of an endpoint.
Use the ret_bytes param to know how much has been written to the USB bus
and write the remaining chunks in the subsequent calls.
Usually the USB driver write doesn't happen immediately in cases where
the usb_write() is not synchronous. In such cases, USB driver returns
-EAGAIN.
If driver returns -EAGAIN, yield so as to give other threads a chance
to run while waiting for previous USB write to complete.
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
Rename variable zpkt to cpkt to complete the move from ZoAP to CoAP.
Remove unused tests/net/lib/zoap/CMakeLists.txt file.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Not all boards are going to have the ccs811 on them, and thus not in the
device tree. We need a dts.fixup stub to dummy out the CONFIG_CCS811_*
defines that the driver expects.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
net_app_ctx maintains multiple net contexts(net_ctx). But when http
api's wants to reply or send some data, its always choose the first
net_context in the array, which is not correct always.
net_app_get_net_pkt_with_dst() api will select proper context
based on destination address. So with the help of new api in
net_app, http can select proper context and send packets. To
achieve this, desination address is provided in http_recv_cb_t
and http_connect_cb_t callbacks. Also chaged relevant API's to
provide destination address in http message preparation methods.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for building the WS2812 LED strip driver sample against
the new ws2812b_sw driver. Currently a configuration is only provided
for the BBC micro:bit board.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Initially this sample was intended to be very simple and schematic,
but as this sample going to become a base for stream API conversion,
time to handle all the edge conditions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Initially this sample was intended to be very simple and schematic,
but as this sample going to become a base for stream API conversion,
time to handle all the edge conditions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
mbedTLS log level is obviously a mbedTLS config setting. It makes
sense to have it defined in mbedTLS Kconfig, and different parts
of Zephyr to reuse as needed (e.g. net-app vs upcoming TLS wrapper
for sockets).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Move the generated files into include/generated so they live with the
build and not in the zephyr source tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Create a net sample to setup a multi-node RPL mesh network using QMEU.
To enable this, it was necessary implement a hw filter on IEEE 802.15.4
UART Pipe driver and create a QEMU pipe management on cmake.
This sample use a tool developed on zephyr net-tools repository called
virtual-hub.
Signed-off-by: Pedro Martucci <pedropaulomartucci@gmail.com>
The Host header is even mandatory in HTTP 1.1, and indeed without
it, many virtual hosting setups don't work (which are many), so to
be faithful to what README says: "You can edit the source code to
issue a request to any other site on the Internet", let's
complicate the sample by including it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When testing whether the CTR mode decrypted the payload properly, a
comparison of `decrypt.out_buf` with the known plain text `plaintext`
is performed, but the buffer comparison that is printed uses
`plaintext` and `encrypt.out_buf` instead.
Coverity-CID: 181847
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This sample downloads a more or less big file (~6MB as preconfigured)
over HTTP and checks its hash for integrity. It also repeat such a
download indefinitely, counting total number of bytes transferred.
This is thus a kind of traffic load testing sample. (Ported to C
from MicroPython original).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This sample (which should eventually become a proper test) suite
builds from simple applications of the new primitives to a full
context switch test and interrupt handling suite (based on the
CPU-internal CCOMPARE2 timer).
It's been extraordinarily useful finding regressing as the asm2 code
gets modified and should probably stick around as long as possible.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The previous default, "config-threadnet.h", is more or less arbitrary
choice made in a commit 312def2c78 1.5 years ago. In particular,
it's not related to Thread support in Zephyr per se (there was no
such support at that time).
It doesn't make sense to have a default intended for a particular,
not widely used (yet) protocol. Instead, the default should work
out of the box with a contemporary widely deployed arrays of TLS
servers, which are HTTPS server. config-mini-tls1_2.h works with
https://google.com, and by extension, with many other servers on
the Internet.
So, have that as the default, and let applications with special
needs to override that to what they need.
Addresses: #6132
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
bt_gatt_discover_params parameter shall remain valid as long as the
procedure is in place.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert the mesh code to use the new net_buf_siple APIs. This has the
benefit of saving 4 bytes off the stack due to the not needed pointer.
Also update the publication context helpers to map to the new
net_buf_simple API in an intuitive way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Two docs listed in the Samples an Demos TOC had the same title displayed
in the board-specific samples section, "Power Management Demo". Give
both sample docs a more specific title.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
With 323e8cf069 applied and printf() working out of the box,
CONFIG_NET_BUF_LOG=y workarounds can be removed from configs of
all samples.
Also, print an intro message at the start of each server sample,
to give a user hint that the app didn't just hang and what to do
next. (The port waiting for connection is printed. We can't (easily)
print host address, because the samples should run on both Zephyr
and POSIX systems, and finding out local host address would require
hairy #ifdef's undermining the purpose of these samples (that is,
showing that the *same* code can be used on both types of systems)).
Fixes: #5379
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Redesign of the net_buf_simple and net_buf structs, where the data
payload portion is split to a separately allocated chunk of memory. In
practice this means that buf->__buf becomes a pointer from having just
been a marker (empty array) for where the payload begins right after
the meta-data.
Fixes#3283
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The net_buf unit tests were doing some pretty hacky stuff with
defining a dummy _net_buf_pool_list variable to fulfil the linker
magic that happens with a real build. Until now the code got lucky in
that the simple net_buf_alloc() tests didn't depend on
_net_buf_pool_list being valid, however with the coming redesign even
net_buf_alloc will require proper setup of this.
Since the unit tests were extremely minimal, and not testing anything
beyond what tests/net/buf already tests, just remove them for now.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With current value of IPV6 Multicast address, IPV6 mcast bind
does not succeed and IPSP use case could not work.
Change use case multicast address to match IPV6 address and
enable binding
fixes: #6050
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Replace seldom occurrences of FLASH_DRIVER_NAME by equivalent
and commonly used FLASH_DEV_NAME.
Fixes#5919.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add sample application for AMS CCS811 digital gas sensor driver.
This application fetches Co2, VOC, Voltage and Current readings
from the sensor and prints it on serial console continuously.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Make it easy to override HTTP host/port/path. Print URL which we
request and make few other adjustment to the output for clarity.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
SENSOR_CHAN_DISTANCE is now in meters. Print value in meters, as
double, this requires printf() and CONFIG_STDOUT_CONSOLE. This is
similar to how other sensor samples have it.
Fixes: #5693
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
