Add console harness support for USB mass storage test.
Also, using overlay config for DISK_ACCESS configuration
and accessing the different config file with different
method.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This flag is an indication to the timer driver that the OS doesn't
care about rollover conditions of the tick count while idling, so the
system doesn't need to wake up once per counter flip[1]. Obviously in
that circumstance values returned from k_uptime_get_32() are going to
be wrong, so the implementation had an assert to check for misuse.
But no one understood that from the docs, so the only place these APIs
were used in practice were as "guards" around code that needed to call
k_uptime_get_32(), even though that's 100% wrong per docs!
Clarify the docs. Remove the incorrect guards. Change the flag to
initialize to true so that uptime isn't broken-by-default in tickless
mode. Also move the implemenations of the functions out of the
header, as there's no good reason for these to need to be inlined.
[1] Which can be significant. A 100MHz ARM using the 24 bit SysTick
counter rolls over at about 6 Hz, and if it had to come out of
idle at that rate it would be a significant power issue that would
swamp the gains from tickless. Obviously systems with slow
counters like nRF or 64 bit ones like RISC-V or x86's TSC aren't
as affected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove redundant 'sample' tag and add something that matches the
functionality and features being tested, demonstrated.
Avoid short abbriviations and using full names for fs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add sample application for LSM303DLHC, ST MEMS
system-in-package featuring a 3D digital linear
acceleration sensor and a 3D digital magnetic
sensor.
Enable sample to build on stm32f3_disco board
during sanitycheck.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
ROM consumption is higher with new shell which prevents
quark_se_c1000_devboard from building. Remove that board
from sanitychecker runs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use new shell instead of the legacy one. This commit also fixes
the configuration file mess and allows the program to be run on
more hardware.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There were no shell commands implemented so remove the shell
support from this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed obsolete CONFIG_SYS_LOG_* and CONFIG_NET_DEBUG_* options
from various sample and test applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The conf file contained obsolete config options and it was
not really used. Cleaned also the sample.yaml file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, wifi-enabled samples were not built by sanitycheck for the
cc3220sf_launchxl.
This patch gets the sockets echo sample to build.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Also, defines one LOG_MODULE_NAME for the simplelink WiFi driver, and
uses the same name for all files in this driver (module).
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
If user will enable shell than for each backend shell instance
will be created automatically.
Update all shell examples according to the new initialization
procedure.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The $srctree environment variable gives the path relative to which
'(o)source' statements work (the current directory is used if $srctree
is unset). It is set to $ZEPHYR_BASE in cmake/kconfig.cmake, so there's
no need to qualify the source of Kconfig.zephyr in sample Kconfig files
(or in external projects).
All 'source's in Zephyr assume that the Zephyr root directory is used as
the srctree as well, and would break otherwise.
Remove the $(ZEPHYR_BASE)s to make it clearer that all 'source'
statements work relative to the Zephyr root. There was some user
confusion on IRC.
Also explain how things work in the documentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactor USB writes, start transfer only when device
is configured, the change makes it possible to work with native_posix
USB virtual controller.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Some terminals literally interprets shell output data. Hence to print
a message in new line shell needs to send `\r\n` each time. To minimize
flash usage user can now send `\n` as a line delimiter and shell will
automatically add missing CR character.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This commit updates the mem_domain_apis_test sample and the
mem_protect test, so they can compile and execute in ARMv8-M
platforms, which do not support the P_RW_U_RO access permissions
combination (privileged read/write, unprivileged read-only). The
modification consists of, simply, selecting a different access
permission (P_RO_U_RO) when building for ARMv8-M MPUs with the
unmodified ARM MPU architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
