This sample is linking the 'app' with 'subsys__bluetooth', which will
add zephyr/subsys/bluetooth to the include path of the app. But this
is unnecessary as the app already has this path on it's include path.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Legacy shell removed in order to avoid maintaining two shells
systems.
All examples and tests have been migrated to the new shell.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Convert lsm303dlhc_accel & lsm303dlhc_magn sensor driver to use new
defines so we can remove the dts_fixup.h code for it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Driver for networking device Microchip ENC28J60 is used as SPI slave,
moved to DTS type definition. Samples echo_client and echo_server use
this device on Arduino 101 board.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update boards yaml file with arduino_i2c supported option
We exclude disco_l475_iot1 from the x_nucleo_iks01a1 sample since there
are duplicated sensors between the disco_l475_iot1 and shield. Until
Zephyr drivers can handle multiple sensors we need to have this exclude.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This board has headers for these buses so they should be made available
without requiring special overlays.
Also take advantage of the new Nordic auto-enable for peripherals,
which eliminates the need for special configuration.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
If Server receives re-transmitted message then it will not
transmit corresponding publish message for it.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added app_gpio.c & no_transition_work_handler.c to reduce
burden on main.c. It will simplify & help to understand
overall architecture.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Simplified algorithm behind states binding & target values calculation.
This has improved code readability.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Disabled the CONFIG_COVERAGE for benchmarks and other tests.
This is needed because it interferes with normal behavior of the
test case.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previously there was just "min_ram: 32", which took care about
suitable flash size implicitly. But now we have interesting boards
(e.g. lpcxpresso54114_m0) which tout RAM of 32K and Flash of 64K.
So, become more explicit about Flash requirement for the sample.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
These two tests are hitting a stack overflow on x86_64 (not entirely
surprisingly), but can't just increase stack size because there is an
assert in the CMSIS compatibility layer that stacks be under 512
bytes. Just disable for now.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This builds with a host compiler, not one from the SDK, and so no
newlib library is available. There is work to enable newlib detection
at and above the cmake level. This patch can be reverted when that
lands.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
No MPU support there yet. This test should really be predicated on a
kconfig variable, not architecture.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add Accelerometer mouse by using fxos8700 accelerometer and using data
to control USB HID mouse.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When used suitable config overlay, qemu_cortex_m3 with Ethernet
support can be started with just usual "make run".
An example of such overlay is included with samples/net/echo_server,
can be built and run with:
make BOARD=qemu_cortex_m3 \
CONF_FILE="prj.conf overlay-qemu_cortex_m3_eth.conf" run
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added macro that generates simple report descriptor for mouse.
This improves the readability of hid-mouse sample.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
These were still running through Ethernet using generic
overlay-802154.conf thus creating a dedicated one.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Set BOARD variable in CMakeLists.txt for DMIC Sample App
Since this sample app is for intel_s1000_crb, setting BOARD
in CMakeLists.txt will eliminate the need to specify in
cmake command line every time during build.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Check should be done with & instead of | otherwise it will always be
evaluated as 1/true regardless of the flags.
Fixes#12308
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The current OpenThread integration wants to download (from github) and
configure the OpenThread source tree every time the app is build. We
don't want to be doing this in quadruplicate every time sanitycheck is
run.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These tests were defining a "test_kw41z" case, but that platform is
already whitelisted in the main ("test") case, and this one defines no
different behavior. It's just a dupe.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
nucleo_l476rg uses I2C_3 rather than I2C_0, and uses special magic to
synthesize a corresponding define from a device tree node label. Update
the sample to use the Arduino binding if that's present.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The Nordic TWIM driver uses DMA which requires that the source address
be located in RAM. If it isn't the transfer will rejected as invalid.
Provide a RAM address even though it's never dereferenced.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
0x77 is an available device address (and is the secondary address for
the BME280). 0x78 is a reserved address.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Exteneded shell sample with example how to use shell_fprintf from
any context with 'foreground' command.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The test 'samples/application_development/code_relocation' was failing
in master because it was not declaring that it was defining additional
sections.
The CI error is attached below.
This patch fixes the CI failure by declaring in 'sample.yaml' that
these additional sections are expected.
FAILED:
qemu_cortex_m3/samples/application_development/code_relocation/test
has unrecognized binary sections: ['_SRAM2_RODATA_SECTION_NAME',
'_SRAM_TEXT_SECTION_NAME', '_SRAM_RODATA_SECTION_NAME',
'_SRAM_DATA_SECTION_NAME', '_CUSTOM_SECTION_NAME2']
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix misspellings in documentation (.rst, Kconfig help text, and .h
doxygen API comments), missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
blinky/button and disco samples are now using definitions
generated from boards dts files.
Update samples README files accordingly.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The options selecting nRF drivers are now enabled by default when
an nRF SoC is selected as the build target.
The options selecting given hardware instances are now enabled at
the board level.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
