Some SoCs such as iMX8ULP and iMX93 use sentinel controller
for secure system management, this change ensures the device
driver is available by default.
Signed-off-by: Yongxu Wang <yongxu.wang@nxp.com>
- Code optimization for platforms which don't use subscription feature
in the temperature service.
- Test adaptation to code changes
Signed-off-by: Rafal Dyla <rafal.dyla@nordicsemi.no>
Zephyr replaces the toolchain version of stdint.h to define uint32_t and
int32_t as int rather than long. This breaks the ARM MVE intrinics which
require uint32_t to be defined as unsigned long.
Define 'ZEPHYR_USE_TOOLCHAIN_STDINT_H_' as that causes zephyr_stdint.h to
be skipped, ensuring that the normal stdint.h types are used instead.
Signed-off-by: Keith Packard <keithp@keithp.com>
1. Add core_id for RT685 HIFI4 core, this variable is
used in MCUX SDK cmake.
2. Set cmake variables 'CONFIG_MCUX_COMPONENT_driver.smartdma_mcxn'
and 'CONFIG_MCUX_COMPONENT_driver.smartdma_rt500' to "ON" as these
variables control the loading of source files in the latest driver
CMakeList.txt.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
Add CONFIG_OPENTHREAD_ROUTER_SELECTION_JITTER_OVERRIDE
Kconfig option that enables setting the router selection
jitter to CONFIG_OPENTHREAD_ROUTER_SELECTION_JITTER at
startup.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Add PWM driver support for Renesas RZ/A3UL
Signed-off-by: Hieu Nguyen <hieu.nguyen.ym@bp.renesas.com>
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Remove these legacy kconfig, not necessary.
The DT already has the bindings and nodes required to represent if there
is a FlexSPI and/or SEMC.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This Kconfig does not belong in the ADC folder, because there is not
actually a zephyr ADC driver for this. Also, remove HAS_MCUX_ADC_ETC as
well because it is a useless config.
The cmake line to pull in this driver from the SDK in the zephyr repo is
totally unnecessary. If a user wants to use this SDK driver they can add
it to their build like any other SDK driver or any other
external code module. Zephyr should not be a cesspool of random build
glue for random pieces of code.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Only the k2x series socs seem to be pulling in this driver for some
reason, the kconfig is not needed.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The only code change to remove this was a redundant usage in the rt1180
soc.c which was not needed because it was redundant, if you catch my
drift.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Remove the configs that are not actually used for anything anymore or
never were, or that are redundant with other configs, and don't have any
code changes outside of Kconfig to remove.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
While both LVGL and Zephyr support AL_88 color, the glue to connect them
was still missing. Now AL_88 should be fully supported by Zephyr+LVGL.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Use the Android Bluetooth SBC encoder and decoder.
The Android Bluetooth SBC is put as external library (libsbc).
sbc.c/sbc.h implement the interface that is compliant with
Zephyr style and can be used by Zephyr's other modules (
like A2DP).
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
This commit adds changes which are necessary to support
the AES256 encryption algorithm in mcuboot.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
Add helper functions that can be used to lock/unlock the LVGL's internal
mutex before calling API funcions.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Commit f499ea0 made it so that the compiler optimization flags are also
passed to the assembler. However, this breaks for the IAR toolchain
since it uses the GNU assembler which does not have the same
optimization flags as the IAR compiler.
This commit separates the compiler and assembler optimizations to make
it possible to specify appropriate flags in a toolchains corresponding
`compiler_flags.cmake`
Signed-off-by: Daniel Flodin <daniel.flodin@iar.com>
Currently, the options related to the Rail library are just prefixed by
RAIL_. We prefer to keep all the options related to Simplicity SDK into the
same namespace.
So, just add the required prefix to these options.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
1.Add dts bindings nxp,lpit-channel.yaml and nxp,lpit.yaml
2.Provide counter driver based on lpit driver from NXP mcux-sdk-ng
Signed-off-by: Felix Wang <fei.wang_3@nxp.com>
For some nordic devices the LFRC peripheral is used to calibrate
the LFCLK clock instead of NRFX_CLOCK peripheral. This commit
adds support for the changes already made in nrfx drivers.
Signed-off-by: Robert Robinson <robert.robinson@nordicsemi.no>
This enables Silabs Series 2 HAL source files for the Silabs
VDAC module to be compiled when the SOC_SILABS_ACMP
configuration is selected.
Signed-off-by: Bastien Beauchamp <bastien.beauchamp@silabs.com>
Use CDC ACM serial backend from the new USB device stack.
It was surprising to find out that the porting layer does not only use
the UART API. The legacy USB device stack API used in the porting layer
has been deprecated and is causing CI failures.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Added the gpio driver for EFR series 2 devices.
The SILABS_SISDK_GPIO symbol is added to enable
support for the new GPIO driver.
The SOC_GECKO_GPIO symbol is retained for now to
maintain compatibility with existing drivers and
will be removed in a subsequent commit.
Signed-off-by: S Mohamed Fiaz <fiaz.mohamed@silabs.com>
Add NRFX_GPIOTE_VAR_FEATURE_SUPPORT feature flag to nrfx configuration.
It enables support for special GPIOTE0 instance in nrfx_gpiote driver.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
LVGL already provides an implementation wrapping a C standard library into
its own lv_* functions. Add them to the CMakeLists and set the appropriate
defines for them.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Add initial support for the Cortex-M52 Core which is an implementation
of the Armv8.1-M mainline architecture.
The support is based on the Cortex-M55 support that already exists in
Zephyr.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Set `SL_RAIL_LIB_MULTIPROTOCOL_SUPPORT` to `1` when Rail
Multiprotocol Kconfig is enabled.
This is required to run the Bluetooth multiprotocol initialization
code during `sl_btctrl_init`.
Signed-off-by: James Smith <james@loopj.com>
Enables RAIL Multiprotocol support by linking against the multiprotocol
RAIL library blob when `CONFIG_SILABS_GECKO_RAIL_MULTIPROTOCOL` or
`CONFIG_SILABS_SISDK_RAIL_MULTIPROTOCOL` are enabled.
Signed-off-by: James Smith <james@loopj.com>
The current code base is meant to use cmsis for Cortex A and R and
cmsis_6 for Cortex M, but the build system is configured to include the
path for both when Cortex M is selected. This leaves us exposed to PR
using the old headers, that would not get caught in CI but would fail
the build on a project using Cortex M that only has the cmsis_6 module.
Change the cmsis module setting to only include the module files in the
intended case.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add Kconfigs for RAMLOAD_WITH_REVERT mode in MCUBoot. This mode works in
a manner similar to DIRECT_XIP_WITH_REVERT- namely, mcuboot will only
boot an image that is either confirmed or marked as pending. If both
images are confirmed, mcuboot will still select the one with the higher
version, so downgrading is not possible using this mode.
Signed-off-by: Daniel DeGrasse <ddegrasse@tenstorrent.com>
* Adding folder structure and first pass config for PCS3M5_EVK
* Adding dtsi, kconfig, and other files for KIT_PSC3M5_EVK
evaluation board.
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
